- 您现在的位置：买卖IC网 > PDF目录2156 > LT6600IS8-2.5#PBF (Linear Technology)IC AMP DIFF LP FLTR 2.5MHZ 8SOIC PDF资料下载
参数资料
| 型号： | LT6600IS8-2.5#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 14/16页 |
| 文件大小： | 0K |
| 描述： | IC AMP DIFF LP FLTR 2.5MHZ 8SOIC |
| 标准包装： | 100 |
| 放大器类型： | 差分 |
| 电路数： | 1 |
| 输出类型： | 差分 |
| 电流 - 输入偏压： | 15µA |
| 电压 - 输入偏移： | 5000µV |
| 电流 - 电源： | 28mA |
| 电压 - 电源，单路/双路(±)： | 3 V ~ 11 V，±1.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 管件 |
LT6600-2.5
7
660025fe
PIN FUNCTIONS
IN– and IN+ (Pins 1, 12/Pins 1, 8): Input Pins. Signals can
be applied to either or both input pins through identical
external resistors, RIN. The DC gain from differential inputs
to the differential outputs is 1580Ω/RIN.
NC (Pins 2, 5, 11/NA): No Connection
VOCM (Pin 3/Pin 2): DC Common Mode Reference Voltage-
for the 2nd Filter Stage. Its value programs the common
mode voltage of the differential output of the lter. This
is a high impedance input, which can be driven from an
external voltage reference, or it can be tied to VMID on the
PC board. VOCM should be bypassed with a 0.01μF ceramic
capacitor unless it is connected to a ground plane.
V+ and V– (Pins 4, 8, 9/Pins 3, 6):
Power Supply Pins. For
a single 3.3V or 5V supply (V– grounded) a quality 0.1μF
ceramic bypass capacitor is required from the positive
supply pin (V+) to the negative supply pin (V–). The bypass
should be as close as possible to the IC. For dual supply
applications, bypass V+ to ground and V– to ground with
a quality 0.1μF ceramic capacitor.
OUT+ and OUT– (Pins 6, 7/Pins 4, 5):
Output Pins. These
are the lter differential outputs. Each pin can drive a 100Ω
and/or 50pF load to AC ground.
VMID (Pin 10/Pin 7): The VMID pin is internally biased at
mid-supply, see Block Diagram. For single supply op-
eration, the VMID pin should be bypassed with a quality
0.01μF ceramic capacitor to V–. For dual supply operation,
VMID can be bypassed or connected to a high quality DC
ground. A ground plane should be used. A poor ground
will increase noise and distortion. VMID sets the output
common mode voltage of the 1st stage of the lter. It has
a 5.5kΩ impedance, and it can be overridden with an
external low impedance voltage source.
(DFN/SO)
BLOCK DIAGRAM
–
+ –
+
VOCM
–
+
VOCM
1580Ω
800Ω
V+
V–
11k
OP AMP
PROPRIETARY
LOWPASS
FILTER STAGE
VIN
–
VIN
+
RIN
660025 BD
IN+
VOCM
V+
OUT+
OUT–
V–
VMID
IN–
相关PDF资料 |
PDF描述 |
|---|---|
| LT6600IS8-20 | IC AMP DIFF LP FLTR 20MHZ 8-SOIC |
| LT6604IUFF-2.5#TRPBF | IC AMP DIFF LN DUAL 34-QFN |
| LT6604IUFF-5#TRPBF | IC AMP DIFF LN DUAL 34-QFN |
| LTC1047CSW#TRPBF | IC OPAMP CHOP-STBL W/CAP 16SOIC |
| LTC1049CS8#TRPBF | IC OPAMP CHOP-STBL W/CAPS 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT6600IS8-5 | 制造商:Linear Technology 功能描述:Differential Amplifier and Low Pass Filter 8-Pin SOIC N |
| LT6600IS8-5#PBF | 功能描述:IC AMP DIFF LP FLTR 5MHZ 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:1 系列:- 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.028 V/µs 增益带宽积:105kHz -3db带宽:- 电流 - 输入偏压:3nA 电压 - 输入偏移:100µV 电流 - 电源:3.3µA 电流 - 输出 / 通道:12mA 电压 - 电源，单路/双路(±):2.7 V ~ 12 V，±1.35 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:剪切带 (CT) 其它名称:OP481GRUZ-REELCT |
| LT6600IS8-5#TRPBF | 功能描述:IC AMP DIFF LP FLTR 5MHZ 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:73 系列:Over-The-Top® 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.07 V/µs 增益带宽积:200kHz -3db带宽:- 电流 - 输入偏压:1nA 电压 - 输入偏移:285µV 电流 - 电源:50µA 电流 - 输出 / 通道:25mA 电压 - 电源，单路/双路(±):2 V ~ 44 V，±1 V ~ 22 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-WFDFN 裸露焊盘 供应商设备封装:16-DFN-EP（5x3） 包装:管件 |
| LT6600IS8-5-PBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Very Low Noise, Differential Amplifi er and 5MHz Lowpass Filter |
| LT6600IS8-5-TR | 制造商:LINER 制造商全称:Linear Technology 功能描述:Very Low Noise, Differential Amplifi er and 5MHz Lowpass Filter |
发布紧急采购，3分钟左右您将得到回复。