- 您现在的位置：买卖IC网 > PDF目录10351 > LTC1197IS8#TRPBF (Linear Technology)IC A/DCONV 10BIT W/SHTDWN 8-SOIC PDF资料下载
参数资料
| 型号： | LTC1197IS8#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 7/28页 |
| 文件大小： | 0K |
| 描述： | IC A/DCONV 10BIT W/SHTDWN 8-SOIC |
| 标准包装： | 2,500 |
| 位数： | 10 |
| 采样率（每秒）： | 500k |
| 数据接口： | MICROWIRE?，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 25mW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 带卷 (TR) |
| 输入数目和类型： | 1 个差分，单极 |
第1页第2页第3页第4页第5页第6页当前第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
15
LTC1197/LTC1197L
LTC1199/LTC1199L
Lower Supply Voltage
For lower supply voltages, LTC offers the LTC1197L/
LTC1199L. These pin compatible devices offer specified
performance to 2.7V supplies.
OPERATING ON OTHER THAN 5V SUPPLIES
The LTC1197 operates from 4V to 9V supplies and the
LTC1199 operates from 4V to 6V supplies. The LTC1197L/
LTC1199L operate from 2.7V to 4V supplies. To use these
parts at other than 5V supplies a few things must be kept
in mind.
Bypassing
At higher supply voltages, bypass capacitors on VCC and
VREF if applicable, need to be increased beyond what is
necessary for 5V. For a 9V supply a 10
F tantalum in
parallel with a 0.1
F ceramic is recommended.
Input Logic Levels
The input logic levels of CS, CLK and DIN are made to meet
TTL threshold levels on a 5V supply. When the supply
voltage varies, the input logic levels also change. For the
ADC to sample and convert correctly, the digital inputs
have to meet logic low and high levels relative to the
operating supply voltage (see typical curve of Digital Input
Logic Threshold vs Supply Voltage). If achieving mi-
cropower consumption is desirable, the digital inputs
must go rail-to-rail between VCC and ground (see ACHIEV-
ING MICROPOWER PERFORMANCE section).
Clock Frequency
The maximum recommended clock frequency is 7.2MHz
for the LTC1197/LTC1199 running off a 5V supply and
3.5MHz for the LTC1197L/LTC1199L running off a 2.7V
supply. With the supply voltage changing, the maximum
clock frequency for the devices also changes (see the
typical curve of Maximum Clock Rate vs Supply Voltage).
If the maximum clock frequency is used, care must be
taken to ensure that the device converts correctly.
that convert continuously, the LTC1197/LTC1197L/
LTC1199/LTC1199L will draw their normal operating power
continuously. Several things must be taken into account
to achieve micropower operation.
Shutdown
Figures 1 and 2 show the operating sequence of the
LTC1197/LTC1197L/LTC1199/LTC1199L. The converter
draws power when the CS pin is low and powers itself
down when that pin is high. If the CS pin is not taken all the
way to ground when it is low and not taken to VCC when it
is high, the input buffers of the converter will draw current.
This current may be tens of microamps. It is worthwhile to
bring the CS pin all the way to ground when it is low and
all the way to VCC when it is high to obtain the lowest
supply current.
When the CS pin is high (= supply voltage), the converter
is in shutdown mode and draws only leakage current. The
status of the DIN and CLK inputs have no effect on supply
current during this time. There is no need to stop DIN and
CLK with CS = high, except the MPU may benefit.
Minimize CS Low Time
In systems that have significant time between conver-
sions, lowest power drain will occur with the minimum CS
low time. Bringing CS low, transferring data as quickly as
possible, and then returning CS high will result in the
lowest possible current drain. This minimizes the amount
of time the device draws power. Even though the device
draws more power at high clock rates, the net power is less
because the device is on for a shorter time.
DOUT Loading
Capacitive loading on the digital output can increase
power consumption. A 100pF capacitor on the DOUT pin
can add 200
A to the supply current at a 7.2MHz clock
frequency. The extra 200
A goes into charging and dis-
charging the load capacitor. The same goes for digital lines
driven at a high frequency by any logic. The CV f currents
must be evaluated and the troublesome ones minimized.
APPLICATIO S I FOR ATIO
WU
UU
相关PDF资料 |
PDF描述 |
|---|---|
| VE-J3F-IW-B1 | CONVERTER MOD DC/DC 72V 100W |
| MS27497E22B21SLC | CONN HSG RCPT 21POS WALLMT SCKT |
| LTC1197IS8#TR | IC ADC 10BIT 500KHZ SHTDWN 8SOIC |
| VE-J3D-IW-B1 | CONVERTER MOD DC/DC 85V 100W |
| VE-26V-MX-S | CONVERTER MOD DC/DC 5.8V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1197L | 制造商:LINER 制造商全称:Linear Technology 功能描述:10-Bit, 500ksps ADCs in MSOP with Auto Shutdown |
| LTC1197LC | 制造商:LINER 制造商全称:Linear Technology 功能描述:10-Bit, 500ksps ADCs in MSOP with Auto Shutdown |
| LTC1197LCMS8 | 功能描述:IC ADC 10BIT 250KHZ W/SD 8-MSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC1197LCMS8#PBF | 功能描述:IC ADC 10BIT 250KHZ W/SD 8-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC1197LCMS8#TR | 功能描述:IC ADC 10BIT 250KHZ W/SD 8-MSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
发布紧急采购，3分钟左右您将得到回复。