- 您现在的位置：买卖IC网 > PDF目录10195 > LTC1278-5ISW#PBF (Linear Technology)IC A/DCONV SAMPLNG W/SHTDN24SOIC PDF资料下载
参数资料
| 型号： | LTC1278-5ISW#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 16/16页 |
| 文件大小： | 0K |
| 描述： | IC A/DCONV SAMPLNG W/SHTDN24SOIC |
| 标准包装： | 32 |
| 位数： | 12 |
| 采样率（每秒）： | 500k |
| 数据接口： | 并联 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 150mW |
| 电压电源： | 双 ± |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 24-SOIC |
| 包装： | 管件 |
| 输入数目和类型： | 1 个单端，单极；1 个单端，双极 |
9
LTC1278
compare mode. The input switch switches CSAMPLE to
ground, injecting the analog input charge onto the sum-
ming junction. This input charge is successively com-
pared with the binary-weighted charges supplied by the
capacitive DAC. Bit decisions are made by the high speed
comparator. At the end of a conversion, the DAC output
balances the AIN input charge. The SAR contents (a 12-bit
data word) which represent the AIN are loaded into the
12-bit output latches.
DYNAMIC PERFORMANCE
The LTC1278 has excellent high speed sampling capabil-
ity. FFT (Fast Fourier Transform) test techniques are used
to test the ADC’s frequency response, distortion and
noise at the rated throughput. By applying a low distor-
tion sine wave and analyzing the digital output using an
FFT algorithm, the ADC’s spectral content can be exam-
ined for frequencies outside the fundamental. Figure 2
shows a typical LTC1278 FFT plot.
a 500kHz sampling rate and a 100kHz input. The dynamic
performance is excellent for input frequencies up to the
Nyquist limit of 250kHz.
Effective Number of Bits
The Effective Number of Bits (ENOBs) is a measurement of
the resolution of an ADC and is directly related to the
S/(N + D) by the equation:
N = [S/(N + D) – 1.76]/6.02
where N is the Effective Number of Bits of resolution and
S/(N + D) is expressed in dB. At the maximum sampling
rate of 500kHz the LTC1278 maintains verygoodENOBsup
to the Nyquist input frequency of 250kHz. Refer to Figure 3.
Signal-to-Noise Ratio
The Signal-to-Noise plus Distortion Ratio [S/(N + D)] is the
ratio between the RMS amplitude of the fundamental input
frequency to the RMS amplitude of all other frequency
components at the A/D output. The output is band limited
to frequencies from above DC and below half the sampling
frequency. Figure 2 shows a typical spectral content with
Total Harmonic Distortion
Total Harmonic Distortion (THD) is the ratio of the RMS
sum of all harmonics of the input signal to the fundamental
itself. The out-of-band harmonics alias into the frequency
band between DC and half the sampling frequency. THD is
expressed as:
THD = 20log
√V
2
2 + V32 + V42 ... + VN2
V1
where V1 is the RMS amplitude of the fundamental fre-
quency and V2 through VN are the amplitudes of the
second through Nth harmonics. THD versus input
INPUT FREQUENCY (Hz)
10k
0
EFFECTIVE
NUMBER
OF
BITS
S/(N
+
D)
(dB)
3
5
7
10
100k
1M
2M
LT1278 G4
1
4
6
9
12
11
62
56
74
68
8
2
fSAMPLE = 500kHz
NYQUIST
FREQUENCY
Figure 3. Effective Bits and Signal-to-Noise + Distortion vs
Input Frequency
Figure 2. LTC1278 Nonaveraged, 4096 Point FFT Plot
APPLICATIONS INFORMATION
WU
U
FREQUENCY (Hz)
0
–120
AMPLITUDE
(dB)
–100
–80
–60
–40
–20
0
50k
100k
150k
200k
LTC1278 F2
250k
fSAMPLE = 500kHz ±5V
fIN = 97.045kHz
相关PDF资料 |
PDF描述 |
|---|---|
| MS27473E14B5SB | CONN PLUG 5POS STRAIGHT W/SCKT |
| VI-JWN-MX-S | CONVERTER MOD DC/DC 18.5V 75W |
| MS27497T20B39PB | CONN RCPT 39POS WALL MNT W/PINS |
| LTC1278-5ISW | IC A/DCONV SAMPLNG W/SHTDN24SOIC |
| CXC3102A2812P | CONN RCPT 26POS PNL MNT PIN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1279CG | 功能描述:IC A/DCONV SAMPLNG W/SHTDN24SSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 其它有关文件:TSA1204 View All Specifications 标准包装:1 系列:- 位数:12 采样率（每秒）:20M 数据接口:并联 转换器数目:2 功率耗散（最大）:155mW 电压电源:模拟和数字 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-TQFP 供应商设备封装:48-TQFP（7x7） 包装:Digi-Reel® 输入数目和类型:4 个单端，单极；2 个差分，单极 产品目录页面:1156 (CN2011-ZH PDF) 其它名称:497-5435-6 |
| LTC1279CG#PBF | 功能描述:IC A/DCONV SAMPLNG W/SHTDN24SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 位数:12 采样率（每秒）:3M 数据接口:- 转换器数目:- 功率耗散（最大）:- 电压电源:- 工作温度:- 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-23-6 包装:带卷 (TR) 输入数目和类型:- |
| LTC1279CG#TR | 功能描述:IC ADC 12BIT SAMPL SHTDWN 24SSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| LTC1279CG#TRPBF | 功能描述:IC A/DCONV SAMPLNG W/SHTDN24SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 位数:12 采样率（每秒）:3M 数据接口:- 转换器数目:- 功率耗散（最大）:- 电压电源:- 工作温度:- 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-23-6 包装:带卷 (TR) 输入数目和类型:- |
| LTC1279CSW | 功能描述:IC A/DCONV SAMPLNG W/SHTDN24SOIC RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
发布紧急采购，3分钟左右您将得到回复。