参数资料
型号: LTC1387IG#TRPBF
厂商: Linear Technology
文件页数: 8/12页
文件大小: 0K
描述: IC TXRX RS232/RS485 5VSNGL20SSOP
标准包装: 1,800
类型: 收发器
驱动器/接收器数: 2/2
规程: RS232,RS485
电源电压: 5V
安装类型: 表面贴装
封装/外壳: 20-SSOP(0.209",5.30mm 宽)
供应商设备封装: 20-SSOP
包装: 带卷 (TR)
5
LTC1387
PI FU CTIO S
U
UU
485/232 (Pin 8): Interface Mode Select Input. A low logic
input enables two RS232 drivers and two RS232 receiv-
ers. A high input enables the RS485 driver and the RS485
receiver.
DXEN (Pin 9): Driver Enable Input. A high logic input
enables the drivers and a low logic input disables the
drivers. When disabled, all driver outputs are in high
impedance
GND (Pin 10): Ground.
VEE (Pin 11): Charge Pump Negative Supply Output.
Requires an external 0.1
F capacitor to ground.
RXEN (Pin 12): Receiver Enable Input. A high logic input
enables the receivers and a low logic input disables the
receivers. When disabled, all receiver outputs are in high
impedance.
ON (Pin 13): A high logic level at ON input keeps the charge
pump active regardless of the state of the DXEN and RXEN
inputs. When the charge pump is active, the drivers and
receivers can be enabled or disabled without waiting for
charge pump stabilization time (typically 100
swith0.1F
capacitors). A low logic state at the ON, DXEN and RXEN
inputs will put the transceiver and charge pump in shut-
down mode and reduces ICC to 5A. Whenever the trans-
ceiver is activated from shutdown, the charge pump
should be allowed to stabilize before data transmission.
When DXEN and RXEN are high and ON is low, the charge
pump, drivers and receivers are all active and the driver
outputs are internally looped back to the inputs of the
receiver. The three control inputs ON, DXEN and RXEN can
be configured for one-, two- or three-wire control: one-
wire mode – all three inputs connected together; two-wire
mode – inputs ON and RXEN connected to one wire, DXEN
a separate wire; three-wire mode – separate wires to each
input. See the Function Tables.
DZ/SLEW (Pin 14): Driver Z or Slew Input. In RS232
mode, this pin is the driver Z input. In RS485 mode, this
pin controls the slew rate of the RS485 driver. With the
SLEW pin high, the RS485 driver runs at maximum (fast)
slew rate and can transmit signals up to 5MBd. With the
SLEW pin low, the RS485 driver runs with reduced (slow)
slew rate to control reflections with improperly terminated
cables. In slow mode, the RS485 driver can support data
rates up to 150kBd. This SLEW pin has internal 5
A pull-
up during RS485 mode.
DY (Pin 15): Driver Y Input. Input Y in RS232 mode; the
differential driver input in RS485 mode.
RB (Pin 16): Receiver B Output. Output B in RS232 mode;
output is high impedance in RS485 mode.
RA (Pin 17): Receiver A Output. Output A in RS232 mode;
the differential receiver output in RS485 mode.
VCC (Pin 18): Positive Supply. 4.75V ≤ VCC ≤ 5.25V.
Requires an external 0.1
F bypass capacitor to ground.
C2 (Pin 19): Commutating Capacitor C2 Negative Termi-
nal. Requires an external 0.1
F capacitor between Pins 19
and 20.
C2 +
(Pin 20): Commutating Capacitor C2 Positive
Terminal.
相关PDF资料
PDF描述
LTC1400IS8 IC A/D CONV 12BIT W/SHTDN 8-SOIC
LTC1401IS8#TRPBF IC A/D CONV 12BIT W/SHTDN 8-SOIC
LTC1402IGN#TRPBF IC ADC 12BIT 2.2MSPS SHDN 16SSOP
LTC1403AHMSE#TRPBF IC ADC 14BIT 2.8MSPS DIFF 10MSOP
LTC1403AIMSE-1#TRPBF IC ADC 14BIT 2.8MSPS DIFF 10MSOP
相关代理商/技术参数
参数描述
LTC1387ISW 制造商:Linear Technology 功能描述:Single Transmitter/Receiver RS-232/RS-485 20-Pin SOIC W
LTC1387ISW#PBF 功能描述:IC TXRX RS232/RS485 5VSNGL20SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 产品培训模块:RS-232 & USB Transceiver 标准包装:2,000 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-SSOP(0.209",5.30mm 宽) 供应商设备封装:16-SSOP 包装:带卷 (TR) 其它名称:296-19849-2
LTC1387ISW#TR 功能描述:IC TXRX RS232/RS485 5V 20SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:27 系列:- 类型:收发器 驱动器/接收器数:3/3 规程:RS232,RS485 电源电压:4.75 V ~ 5.25 V 安装类型:表面贴装 封装/外壳:28-SOIC(0.295",7.50mm 宽) 供应商设备封装:28-SOIC 包装:管件
LTC1387ISW#TRPBF 功能描述:IC TXRX RS232/RS485 5VSNGL20SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:27 系列:- 类型:收发器 驱动器/接收器数:3/3 规程:RS232,RS485 电源电压:4.75 V ~ 5.25 V 安装类型:表面贴装 封装/外壳:28-SOIC(0.295",7.50mm 宽) 供应商设备封装:28-SOIC 包装:管件
LTC1387ISWPBF 制造商:Linear Technology 功能描述:RS-232/RS-485 Driver/Receiver SOIC20W