- 您现在的位置：买卖IC网 > PDF目录2003 > LTC1401IS8#TRPBF (Linear Technology)IC A/D CONV 12BIT W/SHTDN 8-SOIC PDF资料下载
参数资料
| 型号： | LTC1401IS8#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 4/20页 |
| 文件大小： | 0K |
| 描述： | IC A/D CONV 12BIT W/SHTDN 8-SOIC |
| 标准包装： | 2,500 |
| 位数： | 12 |
| 采样率（每秒）： | 200k |
| 数据接口： | MICROWIRE?，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 30mW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 带卷 (TR) |
| 输入数目和类型： | 1 个单端，单极 |
12
LTC1401
1401fa
APPLICATIONS INFORMATION
WU
U
circuitry. In this mode, the ADC draws only 1.5mW of
power instead of 15mW (for minimum power, the logic
inputs must be within 500mV of the supply rails). The
wake-up time from Nap mode to active mode is 350ns. In
Sleep mode, power consumption is reduced to 19.5
W by
cutting off the supply to the comparator and reference.
Figure 11 illustrates power-down methods for the LTC1401.
The chip enters Nap mode by keeping the CLK signal low
and pulsing the CONV signal twice. For Sleep mode
operation, CONV signal should be pulsed four times while
CLK is kept low. NAP and SLEEP modes are activated on
the falling edge of the CONV pulse. By pulling SHDN low,
the LTC1401 enters Shutdown mode and power con-
sumption drops to 13.5
W.
Once SHDN goes high, the LTC1401 returns to active
mode or the LTC1401 returns to active mode by pulsing
the CLK signal if the device has entered Nap/Sleep mode.
During the transistion from Sleep mode to active mode,
the VREF voltage ramp-up time is a function of its loading
conditions. With a 10
F bypass capacitor, the wake-up
time from Sleep mode is typically 3ms. A REFRDY signal
is activated once the reference has settled and is ready for
an A/D conversion. This REFRDY bit is sent to the DOUT pin
as the first bit followed by the 12-bit data word (refer to
Figure 12).
DIGITAL INTERFACE
The digital interface requires only three digital lines. CLK
and CONV are both inputs, and the DOUT output provides
the conversion result in serial form.
Figures 12 and 13 show the digital timing waveform of the
LTC1401 during the Analog to Digital Conversion. The
CONV rising edge starts the conversion. Once initiated, it
can not be restarted until the conversion is completed. If
the time from the CONV signal to the CLK rising edge is
less than t2, the digital output will be delayed by one clock
cycle.
The digital output data is updated on the rising edge of the
CLK line. The digital output data consists of a REFRDY bit
followed by the valid 12-bit data word. DOUT data should
be captured by the receiving system on the rising CLK
edge. Data remains valid for a minimum time of t10 after
the rising CLK edge to allow capture to occur.
Figure 11. Nap Mode and Sleep Mode Waveforms
CLK
CONV
NAP
SLEEP
VREF
t1
t11
t1
REFRDY
NOTE: NAP AND SLEEP ARE INTERNAL SIGNALS. REFRDY APPEARS AS THE FIRST BIT IN THE DOUT WORD.
LTC1401 F11
相关PDF资料 |
PDF描述 |
|---|---|
| LTC1402IGN#TRPBF | IC ADC 12BIT 2.2MSPS SHDN 16SSOP |
| LTC1403AHMSE#TRPBF | IC ADC 14BIT 2.8MSPS DIFF 10MSOP |
| LTC1403AIMSE-1#TRPBF | IC ADC 14BIT 2.8MSPS DIFF 10MSOP |
| LTC1404IS8#TRPBF | IC A/D CONV 12BIT W/SHTDN 8-SOIC |
| LTC1405IGN#TRPBF | IC ADC 12BIT 5MSPS SAMPLE 28SSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1402CGN | 功能描述:IC ADC 12BIT 2.2MSPS SHDN 16SSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
| LTC1402CGN#PBF | 功能描述:IC ADC 12BIT 2.2MSPS SHDN 16SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率（每秒）:1M 数据接口:串行，SPI? 转换器数目:1 功率耗散（最大）:- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘（4x4） 包装:Digi-Reel® 输入数目和类型:8 个单端，单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6 |
| LTC1402CGN#TR | 功能描述:IC ADC 12BIT 2.2MSPS SHDN 16SSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
| LTC1402CGN#TRPBF | 功能描述:IC ADC 12BIT 2.2MSPS SHDN 16SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
| LTC1402CGNPBF | 制造商:Linear Technology 功能描述:ADC,LTC1402 12bit 2.2MSPS SPI SSOP |
发布紧急采购，3分钟左右您将得到回复。