- 您现在的位置：买卖IC网 > PDF目录2003 > LTC1414IGN#TRPBF (Linear Technology)IC A/D CONV 14BIT SAMPLNG 28SSOP PDF资料下载
参数资料
| 型号： | LTC1414IGN#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 4/20页 |
| 文件大小： | 0K |
| 描述： | IC A/D CONV 14BIT SAMPLNG 28SSOP |
| 标准包装： | 2,500 |
| 位数： | 14 |
| 采样率（每秒）： | 2.2M |
| 数据接口： | 并联 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 230mW |
| 电压电源： | 双 ± |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-SSOP（0.154"，3.90mm 宽） |
| 供应商设备封装： | 28-SSOP |
| 包装： | 带卷 (TR) |
| 输入数目和类型： | 2 个单端，双极；1 个差分，双极 |
12
LTC1414
APPLICATIONS INFORMATION
WU
U
The VREF pin can be driven with a DAC or other means
shown in Figure 11. This is useful in applications where the
peak input signal amplitude may vary. The input span of
the ADC can then be adjusted to match the peak input
signal, maximizing the signal-to-noise ratio. The filtering
of the internal LTC1414 reference amplifier will limit the
bandwidth and settling time of this circuit. A settling time
of 5ms should be allowed after a reference adjustment.
The output is two’s complement binary with
1LSB = FS – (– FS)/16384 = 5V/16384 = 305.2
V.
In applications where absolute accuracy is important,
offset and full-scale errors can be adjusted to zero. Offset
error must be adjusted before full-scale error. Figure 14
shows the extra components required for full-scale error
adjustment. Zero offset is achieved by adjusting the offset
applied to the AIN– input. For zero offset error apply
– 152
V (i.e., –0.5LSB) at AIN+ and adjust the offset at the
AIN– input until the output code flickers between 0000
0000 0000 00 and 1111 1111 1111 11. For full-scale
adjustment, an input voltage of 2.499544V (FS – 1.5LSBs)
is applied to AIN+ and R2 is adjusted until the output
code flickers between 0111 1111 1111 10 and
0111 1111 1111 11.
Figure 11. Driving VREF with a DAC
LTC1414
AIN
+
ANALOG INPUT
±2V TO ±3V
DIFFERENTIAL
AIN
–
VREF
REFCOMP
AGND
1414 F11
1
2
3
4
5
10
F
LTC1450
2V TO 3V
Differential Inputs
The LTC1414 has a unique differential sample-and-hold
circuit that allows rail-to-rail inputs. The ADC will always
convert the difference of AIN+ – (AIN–) independent of the
common mode voltage. The common mode rejection
holds up to extremely high frequencies, see Figure 12. The
only requirement is that neither input can exceed the AVDD
or AVSS power supply voltages. Integral nonlinearity er-
rors (INL) and differential nonlinearity errors (DNL) are
independent of the common mode voltage, however, the
bipolar zero error (BZE) will vary. The change in BZE is
typically less than 0.1% of the common mode voltage.
Dynamic performance is also affected by the common
mode voltage. THD will degrade as the inputs approach
either power supply rail, from –84dB with a common
mode of 0V to –75dB with a common mode of 2.5V
or –2.5V.
Full-Scale and Offset Adjustment
Figure 13 shows the ideal input/output characteristics for
the LTC1414. The code transitions occur midway between
successive integer LSB values (i.e., – FS + 0.5LSB,
– FS + 1.5LSB, – FS + 2.5LSB,...FS – 2.5LSB, FS – 1.5LSB).
Figure 12. CMRR vs Input Frequency
INPUT FREQUENCY (Hz)
1k
COMMON
MODE
REJECTION
(dB)
80
70
60
50
40
30
20
10
0
10k
100k
LTC1414 F12
1M
10M
Figure 13. LTC1414 Transfer Characteristics
INPUT RANGE
OUTPUT
CODE
LTC1414 F13
011…111
011…110
011…101
000…000
111…111
100…000
100…001
100…010
FS – 1LSB
0
–(FS – 1LSB)
相关PDF资料 |
PDF描述 |
|---|---|
| LTC1415CG#TRPBF | IC A/D CONV 12BIT SAMPLNG 28SSOP |
| LTC1416IG#TR | IC ADC 14BIT 400KSPS SMPL 28SSOP |
| LTC1417AIGN#TR | IC ADC 14BIT 400KSPS SMPL 16SSOP |
| LTC1418ACG#TRPBF | IC A/D CONV 14BIT SRL&PAR 28SSOP |
| LTC1419AISW#TRPBF | IC A/D CONV 14BIT SAMPLNG 28SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1415CG | 功能描述:IC A/D CONV 12BIT SAMPLNG 28SSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| LTC1415CG#PBF | 功能描述:IC A/D CONV 12BIT SAMPLNG 28SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 其它有关文件:TSA1204 View All Specifications 标准包装:1 系列:- 位数:12 采样率（每秒）:20M 数据接口:并联 转换器数目:2 功率耗散（最大）:155mW 电压电源:模拟和数字 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-TQFP 供应商设备封装:48-TQFP（7x7） 包装:Digi-Reel® 输入数目和类型:4 个单端，单极；2 个差分，单极 产品目录页面:1156 (CN2011-ZH PDF) 其它名称:497-5435-6 |
| LTC1415CG#TR | 功能描述:IC ADC 12BIT 1.25MSPS SMP 28SSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| LTC1415CG#TRPBF | 功能描述:IC A/D CONV 12BIT SAMPLNG 28SSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 位数:12 采样率（每秒）:3M 数据接口:- 转换器数目:- 功率耗散（最大）:- 电压电源:- 工作温度:- 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-23-6 包装:带卷 (TR) 输入数目和类型:- |
| LTC1415CSW | 功能描述:IC A/D CONV 12BIT SAMPLNG 28SOIC RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
发布紧急采购，3分钟左右您将得到回复。