- 您现在的位置：买卖IC网 > PDF目录1934 > LTC1569IS8-7#TRPBF (Linear Technology)IC FILTER 10TH ORDR LOWPASS8SOIC PDF资料下载
参数资料
| 型号： | LTC1569IS8-7#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 12/12页 |
| 文件大小： | 0K |
| 描述： | IC FILTER 10TH ORDR LOWPASS8SOIC |
| 标准包装： | 2,500 |
| 滤波器类型： | 线性相位，低通开关电容器 |
| 频率 - 截止或中心： | 300kHz |
| 滤波器数： | 1 |
| 滤波器阶数： | 10th |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 带卷 (TR) |
9
LTC1569-7
Table 2. Wideband Noise vs Supply Voltage, Single 3V Supply
Bandwidth
Total Integrated Noise
DC to fCUTOFF
105
VRMS
DC to 2 fCUTOFF
125
VRMS
DC to fCLK
155
VRMS
Table 3. Wideband Noise vs Supply Voltage, fCUTOFF = 128kHz
Total Integrated Noise
Power Supply
DC to 2 fCUTOFF
3V
125
VRMS
5V
135
VRMS
±5V
145
VRMS
Clock Feedthrough
Clock feedthrough is defined as the RMS value of the clock
frequency and its harmonics that are present at the filter’s
OUT pin (Pin 8). The clock feedthrough is measured with
IN + and IN – (Pins 1 and 2) grounded and depends on the
PC board layout and the power supply decoupling. Table 4
shows the clock feedthrough (the RMS sum of the first 11
harmonics) when the LTC1569-7 is self-clocked with
REXT = 10k, DIV/CLK (Pin 5) open (divide-by-4 mode). The
clock feedthrough can be reduced with a simple RC post
filter.
Table 4. Clock Feedthrough
Power Supply
Feedthrough
3V
0.4mVRMS
5V
0.6mVRMS
±5V
0.9mVRMS
DC Accuracy
DC accuracy is defined as the error in the output voltage
after DC offset and DC gain errors are removed. This is
similar to the definition of the integral nonlinearity in A/D
converters. For example, after measuring values of VOUT(DC)
vs VIN(DC) for a typical LTC1569-7, a linear regression
shows that VOUT(DC) = VIN(DC) 0.99854 + 0.00134V is the
straight line that best fits the data. The DC accuracy
describes how much the actual data deviates from this
straight line (i.e., DCERROR = VOUT(DC) –(VIN(DC) 0.99854
+ 0.00134V). In a 12-bit system with a full-scale value of
2V, the LSB is 488
V. Therefore, if the DCERROR of the
filter is less than 488
V over a 2V range, the filter has
APPLICATIONS INFORMATION
WU
U
12-bit DC accuracy. Figure 9 illustrates the typical DC
accuracy of the LTC1569-7 on a single 5V supply.
Figure 9
VIN DC (V)
–1.5
–1.0
–0.5
0
0.5
1.0
1.5
1569-7 F09
488
244
000
–244
–488
VS = 5V
REXT = 10k
TA = 25°C
DC
ERROR
(
V)
DC Offset
The output DC offset of the LTC1569-7 is trimmed to less
than
±5mV. The trimming is performed with VS = 1.9V,
–1.1V with the filter cutoff frequency set to 8kHz (REXT =
10k, DIV/CLK shorted to V +). To obtain optimum DC offset
performance, appropriate PC layout techniques should be
used. The filter IC should be soldered to the PC board. The
power supplies should be well decoupled including a 1
F
ceramic capacitor from V + (Pin 7) to V – (Pin 4). A ground
plane should be used. Noisy signals should be isolated
from the filter input pins.
When the power supply is 3V, the output DC offset
typically change less than
±2mVwhentheclockfrequency
varies from 64kHz to 8192kHz. When the clock frequency
is fixed, the output DC offset will typically change by
±4mV
(
±13mV) when the power supply varies from 3V to 5V
(
±5V) in the divide-by-1 mode. In the divide-by-4 or
divide-by-16 modes, the output DC offset will typically
change – 9mV (– 27mV) when the power supply varies
from 3V to 5V (
±5V). The offset is measured with respect
to GND (Pin 3).
Aliasing
Aliasing is an inherent phenomenon of sampled data
filters. In lowpass filters significant aliasing only occurs
when the frequency of the input signal approaches the
sampling frequency or multiples of the sampling fre-
quency. The LTC1569-7 samples the input signal twice
相关PDF资料 |
PDF描述 |
|---|---|
| LTC1685IS8 | IC TXRX RS485 PREC DELAY 8-SOIC |
| LTC1755EGN#TR | IC SMART CARD INTERFACE 24SSOP |
| LTC1955IUH#TRPBF | IC SMART CARD INTERFACE DL 32QFN |
| LTC202CS#TRPBF | IC SWITCH QUAD SPST 16SOIC |
| LTC221CN#PBF | IC SWITCH QUAD SPST 16DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1574CS | 功能描述:IC REG BUCK INV ADJ 16SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LTC1574CS#PBF | 功能描述:IC REG BUCK INV ADJ 16SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON（1.45x1） 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2 |
| LTC1574CS#TR | 功能描述:IC REG BUCK INV ADJ 16SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LTC1574CS#TRPBF | 功能描述:IC REG BUCK INV ADJ 16SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LTC1574CS-3.3 | 功能描述:IC REG BUCK INV 3.3V 16SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
发布紧急采购，3分钟左右您将得到回复。