- 您现在的位置：买卖IC网 > PDF目录16023 > LTC1729CS8-8.2 (Linear Technology)IC CTRLR BATT CHRGR LI-ION 8SOIC PDF资料下载
参数资料
| 型号： | LTC1729CS8-8.2 |
| 厂商： | Linear Technology |
| 文件页数： | 7/16页 |
| 文件大小： | 0K |
| 描述： | IC CTRLR BATT CHRGR LI-ION 8SOIC |
| 标准包装： | 100 |
| 功能： | 充电管理 |
| 电池化学： | 锂离子（Li-Ion） |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 管件 |
LTC1729 Series
APPLICATIO S I FOR ATIO
Overview
The LTC1729 is a charge termination controller for the
LT1505/LT1510/LT1511/LT1512/LT1513/LT1769 con-
stant-voltage/constant-current battery charger family.
Table 1 details these chargers. The primary function of this
IC is to stop the charger after three hours of constant-
voltage/constant-current charging. The secondary func-
tion of this controller includes an indication when the
charge current (during constant-voltage mode) drops
below a user-selected threshold. A 500kHz Li-Ion cell
phone charger is shown in Figure 1. The LTC1729 requires
only six external components when combined with the
standard LT1510 application. The LTC1729 provides a
complete and tiny solution for cellular phones and other
portable applications.
Table 1. Battery Chargers
LT1505 4A Step-Down Charger with Input Current Limit
LT1510 1.5A Step-Down Charger
LT1510-5 1.5A 500kHz Step-Down Charger
LT1511 3A Step-Down Charger with Input Current Limit
Comparator COMP1 is used to indicate C /10 charge cur-
rent threshold. (“ C ” is a term used to indicate the Ampere-
hour capacity of a cell.) Figure 3 details the C /10 detection
circuit. The resistor and capacitor on the SENSE pin filter
the signal from the 0.2 ? current sense resistor R1. The
100 μ A current sink on the SENSE pin develops 20mV
across the 200 ? resistor R2. This sets a 20mV offset on
COMP1 that sense resistor R1 must equal before C /10
current is indicated. The C /10 is not recognized by the logic
until it passes through a 3-second digital filter.
For cases where there are multiple batteries to be charged,
the LTC1729 detects when a battery is removed and resets
the timers for the next charge cycle. The battery present
detection is the primary function of comparator COMP2.
When the battery is disconnected from the LTC1729, the
voltage at the BAT pin will begin ramping upward. This is
due to a current source inside the charger or an external
pull-up resistor. Once the voltage on the BAT pin exceeds
the 4.5V/cell limit, COMP2 signals a V MAX = true to the
logic and turns on a transistor that clamps the voltage.
LT1512
LT1513
LT1769
2A Switch SEPIC Charger
3A Switch SEPIC Charger
2A Step-Down Charger with Input Current Limit
There is the possibility of an overvoltage transient at the
charging terminals. This occurs if the battery protection
circuit, which is often included in the battery pack, opens
the connection to the battery during high current charging
Block Diagram
Figure 2 shows the block diagram of the LTC1729. The IC
consists of six comparators, a resistive divider, a UVLO
block and a logic and timer block.
(constant-current mode). This is a result of energy storage
in the inductor. COMP2 senses the overvoltage and clamps
the V C pin, reducing the duty cycle of the charger. If the
battery protection circuit quickly returns battery connec-
tion to the charger (in less than one second), then the
LTC1729 continues charging without resetting the timers.
V CC
CHARGING
CURRENT
LTC1729
I BIAS
100 μ A
CHARGE
LED
+
20mV
–
R1
0.2 ?
+ 20mV –
R2
200 ?
C1
1 μ F
SENSE
BAT
COMP1
3-SEC
FILTER
LOGIC
AND
TIMERS
50 μ A
STATUS
1729 F03
Figure 3. C /10 Detection Circuit
7
相关PDF资料 |
PDF描述 |
|---|---|
| IDCP1813ER180M | INDUCTOR POWER 18UH 0.84A SMD |
| M3CWK-3440K | IDC CABLE - MKC34K/MC34F/MPL34K |
| RBC06DREI-S93 | CONN EDGECARD 12POS .100 EYELET |
| M3UYK-5006J | IDC CABLE - MKS50K/MC50G/MPD50K |
| M3URK-5006J | IDC CABLE - MKS50K/MC50G/MPR50K |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC1730EGN-4 | 功能描述:IC BATT PULSE CHRGR LI-ION16SSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:61 系列:- 功能:电源管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:4.35 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:22-WFDFN 裸露焊盘 供应商设备封装:22-DFN（6x3）裸露焊盘 包装:管件 |
| LTC1730EGN-4#PBF | 功能描述:IC BATT PULSE CHRGR LI-ION16SSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:61 系列:- 功能:电源管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:4.35 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:22-WFDFN 裸露焊盘 供应商设备封装:22-DFN（6x3）裸露焊盘 包装:管件 |
| LTC1730EGN-4#TR | 功能描述:IC BATT PULSE CHRGR LI-ION16SSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:61 系列:- 功能:电源管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:4.35 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:22-WFDFN 裸露焊盘 供应商设备封装:22-DFN（6x3）裸露焊盘 包装:管件 |
| LTC1730EGN-4#TRPBF | 功能描述:IC BATT PULSE CHRGR LI-ION16SSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:61 系列:- 功能:电源管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:4.35 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:22-WFDFN 裸露焊盘 供应商设备封装:22-DFN（6x3）裸露焊盘 包装:管件 |
| LTC1730ES8-4.2 | 功能描述:IC BATT PULSE CHRGR LI-ION 8SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:61 系列:- 功能:电源管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:4.35 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:22-WFDFN 裸露焊盘 供应商设备封装:22-DFN（6x3）裸露焊盘 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。