参数资料
型号: LTC2143IUP-14#PBF
厂商: Linear Technology
文件页数: 16/38页
文件大小: 0K
描述: IC ADC DUAL 14BIT 80 MSPS 64-QFN
标准包装: 40
位数: 14
采样率(每秒): 80M
数据接口: 并联,串行,SPI
转换器数目: 2
功率耗散(最大): 272mW
电压电源: 模拟和数字
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 64-WFQFN 裸露焊盘
供应商设备封装: 64-QFN(9x9)
包装: 管件
输入数目和类型: 2 个差分
配用: DC890B-ND - BOARD USB DATA COLLECTION
23
21454314fa
LTC2145-14/
LTC2144-14/LTC2143-14
50Ω
100Ω
0.1μF
T1 = MA/COM ETC1-1-13
RESISTORS AND CAPACITORS
ARE 0402 PACKAGE SIZE
50Ω
LTC2145-14
21454314 F12
ENC–
ENC+
T1
0.1μF
Figure 12. Sinusoidal Encode Drive
ENC+
ENC
PECL OR
LVDS
CLOCK
0.1μF
21454314 F13
LTC2145-14
Figure 13. PECL or LVDS Encode Drive
VDD
LTC2145-14
21454314 F10
ENC
ENC+
15k
VDD
DIFFERENTIAL
COMPARATOR
30k
Figure 10. Equivalent Encode Input Circuit
for Differential Encode Mode
30k
ENC+
ENC
21454314 F11
0V
1.8V TO 3.3V
LTC2145-14
CMOS LOGIC
BUFFER
Figure 11. Equivalent Encode Input Circuit
for Single-Ended Encode Mode
through 10kΩ equivalent resistance. The encode inputs
can be taken above VDD (up to 3.6V), and the common
mode range is from 1.1V to 1.6V. In the differential encode
mode, ENCshould stay at least 200mV above ground to
avoid falsely triggering the single ended encode mode.
For good jitter performance ENC+ and ENCshould have
fast rise and fall times.
The single-ended encode mode should be used with CMOS
encode inputs. To select this mode, ENCis connected to
ground and ENC+ is driven with a square wave encode input.
ENC+ can be taken above VDD (up to 3.6V) so 1.8V to 3.3V
CMOS logic levels can be used. The ENC+ threshold is 0.9V.
For good jitter performance ENC+ should have fast rise
and fall times. If the encode signal is turned off or drops
below approximately 500kHz, the A/D enters nap mode.
Clock Duty Cycle Stabilizer
For good performance the encode signal should have a
50% (±5%) duty cycle. If the optional clock duty cycle
stabilizer circuit is enabled, the encode duty cycle can
vary from 30% to 70% and the duty cycle stabilizer will
maintain a constant 50% internal duty cycle. If the encode
signal changes frequency, the duty cycle stabilizer circuit
requires one hundred clock cycles to lock onto the input
clock. The duty cycle stabilizer is enabled by mode control
register A2 (serial programming mode), or by CS (parallel
programming mode).
For applications where the sample rate needs to be changed
quickly, the clock duty cycle stabilizer can be disabled. If
the duty cycle stabilizer is disabled, care should be taken
to make the sampling clock have a 50% (±5%) duty cycle.
The duty cycle stabilizer should not be used below 5Msps.
DIGITAL OUTPUTS
Digital Output Modes
The LTC2145-14/LTC2144-14/LTC2143-14 can operate in
three digital output modes: full rate CMOS, double data
rate CMOS (to halve the number of output lines), or double
data rate LVDS (to reduce digital noise in the system.) The
output mode is set by mode control register A3 (serial
programming mode), or by SCK (parallel programming
APPLICATIONS INFORMATION
相关PDF资料
PDF描述
LTC1347CSW IC TXRX 5V RS232 LOW PWR 28-SOIC
LTC1347CNW IC TXRX 5V RS232 LOW PWR 28-DIP
VE-26D-MX-F1 CONVERTER MOD DC/DC 85V 75W
AD9627ABCPZ-105 IC ADC 12BIT 105MSPS 64LFCSP
SP233ECT-L IC DVR/RCVR RS232 5V SGL 20WSOIC
相关代理商/技术参数
参数描述
LTC2144-12 制造商:LINER 制造商全称:Linear Technology 功能描述:12-Bit, 125Msps/105Msps/ 80Msps Low Power Dual ADCs
LTC2144-14 制造商:LINER 制造商全称:Linear Technology 功能描述:12-Bit, 125Msps/105Msps/ 80Msps Low Power Dual ADCs
LTC2144CUP-12#PBF 功能描述:IC ADC DUAL 12BIT 105MSPS 64-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率(每秒):83k 数据接口:串行,并联 转换器数目:1 功率耗散(最大):95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP(0.600",15.24mm) 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端,双极
LTC2144CUP-12#TRPBF 功能描述:IC ADC DUAL 12BIT 105MSPS 64-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率(每秒):83k 数据接口:串行,并联 转换器数目:1 功率耗散(最大):95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP(0.600",15.24mm) 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端,双极
LTC2144CUP-14#PBF 功能描述:IC ADC DUAL 14BIT 105MSPS 64-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 其它有关文件:TSA1204 View All Specifications 标准包装:1 系列:- 位数:12 采样率(每秒):20M 数据接口:并联 转换器数目:2 功率耗散(最大):155mW 电压电源:模拟和数字 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-TQFP 供应商设备封装:48-TQFP(7x7) 包装:Digi-Reel® 输入数目和类型:4 个单端,单极;2 个差分,单极 产品目录页面:1156 (CN2011-ZH PDF) 其它名称:497-5435-6