参数资料
型号: LTC2226IUH#PBF
厂商: Linear Technology
文件页数: 7/28页
文件大小: 0K
描述: IC ADC 12BIT 25MSPS SAMPL 32-QFN
标准包装: 73
位数: 12
采样率(每秒): 25M
数据接口: 并联
转换器数目: 1
功率耗散(最大): 90mW
电压电源: 单电源
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 32-WFQFN 裸露焊盘
供应商设备封装: 32-QFN 裸露焊盘(5x5)
包装: 管件
输入数目和类型: 1 个单端,双极; 1 个差分,双极
LTC2228/LTC2227/LTC2226
15
222876fb
APPLICATIONS INFORMATION
DYNAMIC PERFORMANCE
Signal-to-Noise Plus Distortion Ratio
The signal-to-noise plus distortion ratio [S/(N + D)] is
the ratio between the RMS amplitude of the fundamen-
tal input frequency and the RMS amplitude of all other
frequency components at the ADC output. The output is
band limited to frequencies above DC to below half the
sampling frequency.
Signal-to-Noise Ratio
The signal-to-noise ratio (SNR) is the ratio between the
RMS amplitude of the fundamental input frequency and
the RMS amplitude of all other frequency components
except the rst ve harmonics and DC.
Total Harmonic Distortion
Total harmonic distortion is the ratio of the RMS sum
of all harmonics of the input signal to the fundamental
itself. The out-of-band harmonics alias into the frequency
band between DC and half the sampling frequency. THD
is expressed as:
THD = 20Log (√(V22 + V32 + V42 + . . . Vn2)/V1)
where V1 is the RMS amplitude of the fundamental fre-
quency and V2 through Vn are the amplitudes of the second
through nth harmonics. The THD calculated in this data
sheet uses all the harmonics up to the fth.
Intermodulation Distortion
If the ADC input signal consists of more than one spectral
component, the ADC transfer function nonlinearity can
produce intermodulation distortion (IMD) in addition to
THD. IMD is the change in one sinusoidal input caused
by the presence of another sinusoidal input at a different
frequency.
If two pure sine waves of frequencies fa and fb are ap-
plied to the ADC input, nonlinearities in the ADC transfer
function can create distortion products at the sum and
difference frequencies of mfa ± nfb, where m and n = 0,
1, 2, 3, etc. The 3rd order intermodulation products are
2fa + fb, 2fb + fa, 2fa – fb and 2fb – fa. The intermodula-
tion distortion is dened as the ratio of the RMS value of
either input tone to the RMS value of the largest 3rd order
intermodulation product.
Spurious Free Dynamic Range (SFDR)
Spurious free dynamic range is the peak harmonic or spuri-
ous noise that is the largest spectral component excluding
the input signal and DC. This value is expressed in decibels
relative to the RMS value of a full-scale input signal.
Input Bandwidth
The input bandwidth is that input frequency at which the
amplitude of the reconstructed fundamental is reduced
by 3dB for a full-scale input signal.
Aperture Delay Time
The time from when CLK reaches mid-supply to the in-
stant that the input signal is held by the sample-and-hold
circuit.
Aperture Delay Jitter
The variation in the aperture delay time from conversion
to conversion. This random variation will result in noise
when sampling an AC input. The signal to noise ratio due
to the jitter alone will be:
SNRJITTER = –20log (2π fIN tJITTER)
相关PDF资料
PDF描述
MC10E1652FNR2G IC COMPARATOR DUAL ECL 20PLCC
AD7714ANZ-5 IC ADC SIGNAL COND 5V 24-DIP
LTC1857CG#PBF IC ADC 8CH 12BIT 100KSPS 28-SSOP
AD7719BRUZ IC ADC 16BIT 24BIT DUAL 28-TSSOP
HA1-4902-2 IC COMPARATOR QUAD PREC 16-DIP
相关代理商/技术参数
参数描述
LTC2226IUH-TR 制造商:LINER 制造商全称:Linear Technology 功能描述:12-Bit, 65/40/25Msps Low Power 3V ADCs
LTC2226IUH-TRPBF 制造商:LINER 制造商全称:Linear Technology 功能描述:12-Bit, 65/40/25Msps Low Power 3V ADCs
LTC2226LX 制造商:LINER 制造商全称:Linear Technology 功能描述:12-Bit, 25Msps 125°C ADC in LQFP
LTC2227 制造商:LINER 制造商全称:Linear Technology 功能描述:14-Bit, 80Msps Low Power 3V ADC
LTC2227CUH 制造商:LINER 制造商全称:Linear Technology 功能描述:12-Bit, 65/40/25Msps Low Power 3V ADCs