- 您现在的位置：买卖IC网 > PDF目录10156 > LTC2295CUP#TRPBF (Linear Technology)IC ADC DUAL 14BIT 10MSPS 64QFN PDF资料下载
参数资料
| 型号： | LTC2295CUP#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 9/24页 |
| 文件大小： | 0K |
| 描述： | IC ADC DUAL 14BIT 10MSPS 64QFN |
| 标准包装： | 2,000 |
| 位数： | 14 |
| 采样率（每秒）： | 10M |
| 数据接口： | 并联 |
| 转换器数目： | 2 |
| 功率耗散（最大）： | 138mW |
| 电压电源： | 单电源 |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 64-WFQFN 裸露焊盘 |
| 供应商设备封装： | 64-QFN（9x9） |
| 包装： | 带卷 (TR) |
| 输入数目和类型： | 2 个单端，双极; 2 个差分, 双极 |
LTC2295
17
2295fa
As with all high speed/high resolution converters, the digi-
tal output loading can affect the performance. The digital
outputs of the LTC2295 should drive a minimal capacitive
load to avoid possible interaction between the digital out-
puts and sensitive input circuitry. The output should be
buffered with a device such as an ALVCH16373 CMOS
latch. For full speed operation the capacitive load should
be kept under 10pF.
Lower OVDD voltages will also help reduce interference
from the digital outputs.
APPLICATIO S I FOR ATIO
WU
U
Data Format
Using the MODE pin, the LTC2295 parallel digital output
can be selected for offset binary or 2’s complement
format. Note that MODE controls both Channel A and
Channel B. Connecting MODE to GND or 1/3VDD selects
offset binary output format. Connecting MODE to
2/3VDD or VDD selects 2’s complement output format. An
external resistor divider can be used to set the 1/3VDD or
2/3VDD logic values. Table 2 shows the logic states for the
MODE pin.
Table 2. MODE Pin Function
CLOCK DUTY
MODE PIN
OUTPUT FORMAT
CYCLE STABILIZER
0
Offset Binary
Off
1/3VDD
Offset Binary
On
2/3VDD
2’s Complement
On
VDD
2’s Complement
Off
Overflow Bit
When OF outputs a logic high the converter is either
overranged or underranged.
Output Driver Power
Separate output power and ground pins allow the output
drivers to be isolated from the analog circuitry. The power
supply for the digital output buffers, OVDD, should be tied
OVDD can be powered with any voltage from 500mV up to
3.6V. OGND can be powered with any voltage from GND up
to 1V and must be less than OVDD. The logic outputs will
swing between OGND and OVDD.
Output Enable
The outputs may be disabled with the output enable pin, OE.
OE high disables all data outputs including OF. Channels
A and B have independent output enable pins (OEA, OEB).
Sleep and Nap Modes
The converter may be placed in shutdown or nap modes
to conserve power. Connecting SHDN to GND results in
normal operation. Connecting SHDN to VDD and OE to VDD
results in sleep mode, which powers down all circuitry
including the reference and typically dissipates 1mW. When
exiting sleep mode it will take milliseconds for the output
data to become valid because the reference capacitors have
to recharge and stabilize. Connecting SHDN to VDD and OE
to GND results in nap mode, which typically dissipates
30mW. In nap mode, the on-chip reference circuit is kept
on, so that recovery from nap mode is faster than that from
sleep mode, typically taking 100 clock cycles. In both sleep
and nap modes, all digital outputs are disabled and enter
the Hi-Z state.
Channels A and B have independent SHDN pins (SHDNA,
SHDNB). Channel A is controlled by SHDNA and OEA, and
Channel B is controlled by SHDNB and OEB. The nap, sleep
and output enable modes of the two channels are completely
independent, so it is possible to have one channel operat-
ing while the other channel is in nap or sleep mode.
to the same power supply as for the logic being driven. For
example, if the converter is driving a DSP powered by a 1.8V
supply, then OVDD should be tied to that same 1.8V supply.
相关PDF资料 |
PDF描述 |
|---|---|
| MS3100A10SL-3P | CONN RCPT 3POS WALL MNT W/PINS |
| ADM208EARU-REEL7 | IC TXRX RS-232 5V 0.1UF 24TSSOP |
| LT1785CS8 | IC TXRX RS485/RS422 60V 8-SOIC |
| CXS3106A2214S | CONN PLUG 19POS STRGHT SKT |
| VE-22V-IW-F2 | CONVERTER MOD DC/DC 5.8V 100W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC2295IUP | 制造商:Linear Technology 功能描述:ADC Dual Pipelined 10Msps 14-bit Parallel 64-Pin QFN EP |
| LTC2295IUP#PBF | 功能描述:IC ADC DUAL 14BIT 10MSPS 64QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极 |
| LTC2295IUP#TRPBF | 功能描述:IC ADC DUAL 14BIT 10MSPS 64QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极 |
| LTC2295UP | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual 14-Bit, 10Msps Low Power 3V ADC |
| LTC2296 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual 14-Bit, 65/40/25Msps Low Power 3V ADCs |
发布紧急采购，3分钟左右您将得到回复。