- 您现在的位置：买卖IC网 > PDF目录10689 > LTC2305IMS#PBF (Linear Technology)IC ADC 12BIT I2C 12-MSOP PDF资料下载
参数资料
| 型号： | LTC2305IMS#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 10/26页 |
| 文件大小： | 0K |
| 描述： | IC ADC 12BIT I2C 12-MSOP |
| 标准包装： | 37 |
| 位数： | 12 |
| 采样率（每秒）： | 14k |
| 数据接口： | I²C，串行 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 17.5mW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 12-TSSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 12-MSOP |
| 包装： | 管件 |
| 输入数目和类型： | 2 个单端，单极；2 个单端，双极；1 个差分，单极；1 个差分，双极 |
| 产品目录页面： | 1347 (CN2011-ZH PDF) |
| 配用： | DC1444A-B-ND - BOARD SAR ADC LTC2305 |
LTC2301/LTC2305
18
23015fb
APPLICATIONS INFORMATION
After power-up, the ADC initiates an internal reset cycle
which sets the DIN word to all 0s (S/D=O/S=UNI=SLP=0).
A write operation may be performed if the default state
of the ADC’s conguration is not desired. Otherwise, the
ADC must be properly addressed and followed by a STOP
condition to initiate a conversion.
Initiating a New Conversion
The LTC2301/LTC2305 awakens from either nap or sleep
when properly addressed for a read/write operation. A
STOP command may then be issued after performing the
read/write operation to trigger a new conversion.
Issuing a STOP command after the 8th SCL clock pulse of
the address frame and before the completion of a read/write
operation will also initiate new conversion, but the output
result may not be valid due to lack of adequate acquisition
time (see Acquisition section).
LTC2301/LTC2305 Address
The LTC2301/LTC2305 have two address pins (AD0 and
AD1) that may be tied high, low or left oating to enable
one of the 9 possible addresses (see Table 2).
In addition to the congurable addresses listed in Table 2,
the LTC2301/LTC2305 also contain a global address
(1101011) which may be used for synchronizing multiple
LTC2301/LTC2305s or other I2C LTC230X SAR ADCs (see
Synchronizing Multiple LTC2301/LTC2305s with Global
Address Call section).
Table 2. Address Assignment
AD1
AD0
ADDRESS
LOW
0001000
LOW
Float
0001001
LOW
HIGH
0001010
Float
HIGH
0001011
Float
0011000
Float
LOW
0011001
HIGH
LOW
0011010
HIGH
Float
0011011
HIGH
0101000
Continuous Read
In applications where the same input channel is sampled
each cycle, conversions can be continuously performed
and read without a write cycle (see Figure 8). The DIN word
remains unchanged from the last value written into the
device. If the device has not been written to since power-
up, the DIN word defaults to all 0s (S/D=O/S=UNI=SLP=0).
At the end of a read operation, a STOP condition may be
given to start a new conversion. At the conclusion of the
conversion cycle, the next result may be read using the
method described above. If the conversion cycle is not
concluded and a valid address selects the device, the
LTC2301/LTC2305 generates a NACK signal indicating the
conversion cycle is in progress.
Figure 8. Consecutive Reading with the Same Conguration
S
CONVERSION
NAP
DATA OUTPUT
CONVERSION
NAP
DATA
OUTPUT
R
ACK
READ
7-BIT ADDRESS
P
S
R
ACK
23015 F08
READ
7-BIT ADDRESS
P
相关PDF资料 |
PDF描述 |
|---|---|
| LTC1444CS | IC COMP W/REF LOWPWR QUAD 16SOIC |
| AD7781BRUZ | IC ADC 20BIT 1CH LP SD 16TSSOP |
| ISL31485EIBZ-T7A | IC TXRX RS485 FAULT PROT 8SOIC |
| LTC1445CN | IC COMP W/REF LOWPWR QUAD 16-DIP |
| LTC2488IDE#PBF | IC ADC 16BIT DELTA SIG 14-DFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC2306CDD#PBF | 功能描述:IC ADC 12BIT 2CH 500KSPS 10-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2306CDD#TRPBF | 功能描述:IC ADC 12-BIT 2CH 500KSPS 10DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2306IDD#PBF | 功能描述:IC ADC 12BIT 2CH 500KSPS 10-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2306IDD#TRPBF | 功能描述:IC ADC 12-BIT 2CH 500KSPS 10DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2308CUF#PBF | 功能描述:IC ADC 12BIT 8CH 500KSPS 24-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
发布紧急采购，3分钟左右您将得到回复。