- 您现在的位置：买卖IC网 > PDF目录2006 > LTC2306CDD#PBF (Linear Technology)IC ADC 12BIT 2CH 500KSPS 10-DFN PDF资料下载
参数资料
| 型号： | LTC2306CDD#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 2/20页 |
| 文件大小： | 0K |
| 描述： | IC ADC 12BIT 2CH 500KSPS 10-DFN |
| 标准包装： | 121 |
| 位数： | 12 |
| 采样率（每秒）： | 500k |
| 数据接口： | MICROWIRE?，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 14mW |
| 电压电源： | 单电源 |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-WFDFN 裸露焊盘 |
| 供应商设备封装： | 10-DFN（3x3） |
| 包装： | 管件 |
| 输入数目和类型： | 2 个单端，单极；2 个单端，双极；1 个差分，单极；1 个差分，双极 |
| 产品目录页面： | 1347 (CN2011-ZH PDF) |
LTC2302/LTC2306
10
23026fa
PIN FUNCTIONS
LTC2302
SDO (Pin 1): Three-State Serial Data Out. SDO outputs
the data from the previous conversion. SDO is shifted
out serially on the falling edge of each SCK pulse. SDO is
enabled by a low level on CONVST.
CONVST (Pin 2): Conversion Start. A rising edge at
CONVST begins a conversion. For best performance,
ensure that CONVST returns low within 40ns after the
conversion starts or after the conversion ends.
VDD (Pin 3): 5V Supply. The range of VDD is 4.75V to 5.25V.
Bypass VDD to GND with a 0.1μF ceramic capacitor and a
10μF tantalum capacitor in parallel.
IN+, IN– (Pin 4, Pin 5):
Positive (IN+) and Negative (IN–)
Differential Analog Inputs.
VREF (Pin 6): Reference Input. Connect an external
reference at VREF. The range of the external reference is
0.1V to VDD.BypasstoGNDwithaminimum10μFtantalum
capacitor in parallel with a 0.1μF ceramic capacitor.
GND (Pin 7): Ground. All GND pins must be connected to
a solid ground plane.
SDI (Pin 8): Serial Data Input. The SDI serial bit stream
congures the ADC and is latched on the rising edge of
the rst 6 SCK pulses.
SCK (Pin 9): Serial Data Clock. SCK synchronizes the
serial data transfer. The serial data input at SDI is latched
on the rising edge of SCK. The serial data output at SDO
transitions on the falling edge of SCK.
OVDD (Pin 10): Output Driver Supply. Bypass OVDD to
GND with a 0.1μF ceramic capacitor close to the pin. The
range of OVDD is 2.7V to 5.25V.
Exposed Pad (Pin 11): Exposed Pad Ground. Must be
soldered directly to ground plane.
LTC2306
SDO (Pin 1): Three-State Serial Data Out. SDO outputs
the data from the previous conversion. SDO is shifted
out serially on the falling edge of each SCK pulse. SDO is
enabled by a low level on CONVST.
CONVST (Pin 2): Conversion Start. A rising edge at
CONVST begins a conversion. For best performance,
ensure that CONVST returns low within 40ns after the
conversion starts or after the conversion ends.
VDD (Pin 3): 5V Supply. The range of VDD is 4.75V to 5.25V.
Bypass VDD to GND with a 0.1μF ceramic capacitor and a
10μF tantalum capacitor in parallel.
CH0, CH1 (Pin 4, Pin 5): Channel 0 and Channel 1 Analog
Inputs. CH0, CH1 can be congured as single-ended or
differential input channels. See the Analog Input Multi-
plexer section.
VREF (Pin 6): Reference Input. Connect an external
reference at VREF.The range of the external reference is
0.1V to VDD.BypasstoGNDwithaminimum10μFtantalum
capacitor in parallel with a 0.1μF ceramic capacitor.
GND (Pin 7): Ground. All GND pins must be connected to
a solid ground plane.
SDI (Pin 8): Serial Data Input. The SDI serial bit stream
congures the ADC and is latched on the rising edge of
the rst 6 SCK pulses.
SCK (Pin 9): Serial Data Clock. SCK synchronizes the
serial data transfer. The serial data input at SDI is latched
on the rising edge of SCK. The serial data output at SDO
transitions on the falling edge of SCK.
OVDD (Pin 10): Output Driver Supply. Bypass OVDD to
OGND with a 0.1μF ceramic capacitor close to the pin.
The range of OVDD is 2.7V to 5.5V.
Exposed Pad (Pin 11): Exposed Pad Ground. Must be
soldered directly to ground plane.
相关PDF资料 |
PDF描述 |
|---|---|
| LTC2351HUH-12#TRPBF | IC ADC 12BIT 1.5MSPS 32-QFN |
| LTC2351HUH-14#TRPBF | IC ADC 14BIT 1.5MSPS 32-QFN |
| LTC2355IMSE-14#TRPBF | IC ADC 14BIT 3.5MSPS 10-MSOP |
| LTC2356IMSE-14#TRPBF | IC ADC 14BIT 3.5MSPS 10-MSOP |
| LTC2366HTS8#TRPBF | IC ADC 12BIT 3MSPS TSOT23-8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC2306IDD#PBF | 功能描述:IC ADC 12BIT 2CH 500KSPS 10-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2306IDD#TRPBF | 功能描述:IC ADC 12-BIT 2CH 500KSPS 10DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2308CUF#PBF | 功能描述:IC ADC 12BIT 8CH 500KSPS 24-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
| LTC2308CUF#PBF | 制造商:Linear Technology 功能描述:A/D Converter (A-D) IC |
| LTC2308CUF#TRPBF | 功能描述:IC ADC 12BIT 500KSPS 24-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
发布紧急采购，3分钟左右您将得到回复。