参数资料
型号: LTC2451ITS8#TRPBF
厂商: Linear Technology
文件页数: 6/20页
文件大小: 0K
描述: IC ADC 16BIT DELTA SIG TSOT23-8
标准包装: 2,500
位数: 16
采样率(每秒): 60
数据接口: I²C,串行
转换器数目: 1
功率耗散(最大): 1.2mW
电压电源: 单电源
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: SOT-23-8 薄型,TSOT-23-8
供应商设备封装: TSOT-23-8
包装: 带卷 (TR)
输入数目和类型: 1 个单端,单极
配用: DC1383A-A-ND - BOARD DELTA SIGMA ADC LTC2451
LTC2451
14
2451fg
Therearesomeimmediatetrade-offsinRSandCINwithout
needing a full circuit analysis. Increasing RS and CIN can
provide the following benefits:
1. Due to the LTC2451’s input sampling algorithm, the
input current drawn by the input pin (IN) over a con-
version cycle is 50nA. A high RS CIN attenuates the
high frequency components of the input current, and
RS values up to 1k result in <1LSB additional INL.
2. The bandwidth from VSIG is reduced at the input pin.
This bandwidth reduction isolates the ADC from high
frequency signals, and as such provides simple anti-
aliasing and input noise reduction.
3. Switching transients generated by the ADC are attenu-
ated before they go back to the signal source.
4. A large CIN gives a better AC ground at the input pin,
helping reduce reflections back to the signal source.
5. Increasing RS protects the ADC by limiting the current
during an outside-the-rails fault condition.
There is a limit to how large RS CIN should be for a given
application. Increasing RS beyond a given point increases
Figure 12. Measured INL vs Input Voltage,
CIN = 0.1F, VCC = 5V, TA = 25°C
the voltage drop across RS due to the input current,
to the point that significant measurement errors exist.
Additionally, for some applications, increasing the RSCIN
product too much may unacceptably attenuate the signal
at frequencies of interest.
For most applications, it is desirable to implement CIN
as a high quality 0.1F ceramic capacitor and RS ≤ 1k.
This capacitor should be located as close as possible to
the input pin. Furthermore, the area encompassed by
this circuit path, as well as the path length, should be
minimized.
In the case of a 2-wire sensor that is not remotely
grounded, it is desirable to split RS and place series
resistors in the ADC input line and in the sensor ground
return line, which should be tied to the ADC GND pin using
a star connection topology.
Figure 12 shows the measured LTC2451 INL versus the
input voltage as a function of RS value with an input ca-
pacitor CIN = 0.1F.
In some cases, RS can be increased above these guide-
lines. The input current is negligible when the ADC is
APPLICATIONS INFORMATION
INPUT VOLTAGE (V)
0
INL(LSB)
–4
0
4
3
5
2451 F12
–8
–12
–16
1
2
4
8
12
16
RS = 10k
RS = 1k
RS = 0
相关PDF资料
PDF描述
LTC2452ITS8#TRPBF IC ADC 16BIT DELTA SIG TSOT23-8
LTC2453ITS8#TRMPBF IC ADC 16BIT DELTA SIG TSOT23-8
LTC2482IDD#TRPBF IC ADC 16BIT 10-DFN
LTC2483IDD#TRPBF IC ADC 16BIT I2C 10-DFN
LTC2485CDD#TRPBF IC ADC 24BIT I2C 10-DFN
相关代理商/技术参数
参数描述
LTC2452CDDB#PBF 制造商:Linear Technology 功能描述:ADC Single Delta-Sigma 60sps 16-bit Serial 8-Pin DFN EP 制造商:Linear Technology 功能描述:Bulk
LTC2452CDDB#TRMPBF 功能描述:IC ADC 16BIT DELTA SIG 8-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 位数:10 采样率(每秒):357k 数据接口:DSP,MICROWIRE?,QSPI?,串行,SPI? 转换器数目:1 功率耗散(最大):830µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-TDFN-EP(3x3) 包装:剪切带 (CT) 输入数目和类型:2 个单端,单极;2 个单端,双极;1 个差分,单极;1 个差分,双极 产品目录页面:1396 (CN2011-ZH PDF) 其它名称:MAX1395ETB+TCT
LTC2452CDDB#TRPBF 功能描述:IC ADC 16BIT DELTA SIG 8-DFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率(每秒):15 数据接口:MICROWIRE?,串行,SPI? 转换器数目:1 功率耗散(最大):480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN(5x7) 包装:带卷 (TR) 输入数目和类型:16 个单端,双极;8 个差分,双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2452CTS8#PBF 制造商:Linear Technology 功能描述:Bulk 制造商:Linear Technology 功能描述:MS-ADC/Delta Sigma, CUT TAPE 16-bit 60Hz SPI Different Ultra-Tiny Delta Sigma ADC
LTC2452CTS8#TRMPBF 功能描述:IC ADC 16BIT DELTA SIG TSOT23-8 RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率(每秒):1M 数据接口:串行,SPI? 转换器数目:1 功率耗散(最大):- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘(4x4) 包装:Digi-Reel® 输入数目和类型:8 个单端,单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6