- 您现在的位置：买卖IC网 > PDF目录20877 > LTC3220IPF#PBF (Linear Technology)IC LED DRVR QVGA DISPLAY 28UTQFN PDF资料下载
参数资料
| 型号： | LTC3220IPF#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 14/20页 |
| 文件大小： | 0K |
| 描述： | IC LED DRVR QVGA DISPLAY 28UTQFN |
| 标准包装： | 91 |
| 拓扑： | 开路漏极，升压（升压），切换式电容器（充电泵） |
| 输出数： | 18 |
| 内部驱动器： | 是 |
| 类型 - 主要： | 背光 |
| 类型 - 次要： | LED 闪烁器 |
| 频率： | 850kHz ~ 1.05MHz |
| 电源电压： | 2.9 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-UFQFN 裸露焊盘 |
| 供应商设备封装： | 28-UTQFN（4x4）裸露焊盘 |
| 包装： | 管件 |
| 工作温度： | -40°C ~ 125°C |
LTC3220/LTC3220-1
OPERATION
Bus Speed
The I 2 C port is designed to be operated at speeds up to
400kHz. It has built-in timing delays to ensure correct
operation when addressed from an I 2 C compliant master
device. It also contains input ?lters designed to suppress
glitches should the bus become corrupted.
Start and Stop Conditions
A bus-master signals the beginning of a communication
to a slave device by transmitting a START condition.
A START condition is generated by transitioning SDA
from high to low while SCL is high. When the master has
?nished communicating with the slave, it issues a STOP
condition by transitioning SDA from low to high while
SCL is high. The bus is then free for communication with
another I 2 C device.
Byte Format
Each byte sent to the LTC3220/LTC3220-1 must be 8 bits
long followed by an extra clock cycle for the acknowledge
bit to be returned by the LTC3220/LTC3220-1. The data
should be sent to the LTC3220/LTC3220-1 most signi?cant
bit (MSB) ?rst.
Acknowledge
The acknowledge signal is used for handshaking between
the master and the slave. An acknowledge (active low)
generated by the slave (LTC3220/LTC3220-1) lets the mas-
ter know that the latest byte of information was received.
The acknowledge related clock pulse is generated by the
master. The master releases the SDA line (high) during
the acknowledge clock cycle. The slave-receiver must pull
down the SDA line during the acknowledge clock pulse
so that it remains a stable low during the high period of
this clock pulse.
Slave Address
Each version of LTC3220/LTC3220-1 responds to a unique
address which has been factory programmed (Table 1).
The eighth bit of the address byte (R/W) must be 0 for the
LTC3220/LTC3220-1 to recognize the address since it is a
write only device. This effectively forces the address to be
8 bits long where the least signi?cant bit of the address
is 0. If the correct seven bit address is given but the R/W
bit is 1, the LTC3220/LTC3220-1 will not respond.
Table 1. LTC3220/LTC3220-1 Factory Programmed Slave
Address
PART NUMBER SLAVE ADDRESS
LTC3220
LTC3220-1
0011100
0011101
32201fc
14
相关PDF资料 |
PDF描述 |
|---|---|
| P51-50-S-AA-I36-20MA-000-000 | SENSOR 50PSIS 7/16 UNF 4-20 MA |
| P51-2000-A-I-M12-4.5OVP-000-000 | SENSOR 2000PSI 7/16-20UNF 4.5V |
| GBC13DCMN | CONN EDGECARD 26POS .100" WW |
| LT3517EUF#TRPBF | IC LED DRIVER AUTOMOTIVE 16-QFN |
| P51-2000-S-G-MD-4.5V-000-000 | SENSOR 2000PSI 1/8-27NPT .5-4.5V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC3220IPF-TRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:360mA Universal 18-Channel LED Driver |
| LTC3221 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Micropower, Regulated Charge Pump in 2 】 2 DFN |
| LTC3221-3.3 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Micropower, Regulated Charge Pump in 2 】 2 DFN |
| LTC3221-5 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Micropower, Regulated Charge Pump in 2 】 2 DFN |
| LTC3221EDC | 制造商:LINER 制造商全称:Linear Technology 功能描述:Micropower, Regulated Charge Pump in 2 】 2 DFN |
发布紧急采购，3分钟左右您将得到回复。