- 您现在的位置：买卖IC网 > PDF目录1829 > LTC3418EUHF#TRPBF (Linear Technology)IC REG BUCK SYNC ADJ 8A 38QFN PDF资料下载
参数资料
| 型号： | LTC3418EUHF#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 10/20页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK SYNC ADJ 8A 38QFN |
| 标准包装： | 2,500 |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.8 V ~ 5 V |
| 输入电压： | 2.25 V ~ 5.5 V |
| PWM 型： | 电流模式，混合 |
| 频率 - 开关： | 1MHz |
| 电流 - 输出： | 8A |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 38-WFQFN 裸露焊盘 |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 38-QFN（5x7） |
LTC3418
APPLICATIONS INFORMATION
Different core materials and shapes will change the size/cur-
rent and price/current relationship of an inductor. Toroid
or shielded pot cores in ferrite or permalloy materials are
small and don’t radiate much energy, but generally cost
more than powdered iron core inductors with similar
characteristics. The choice of which style inductor to use
mainly depends on the price vs size requirements and any
radiated ?eld/EMI requirements. New designs for surface
mount inductors are available from Coiltronics, Coilcraft,
Toko and Sumida.
C IN and C OUT Selection
The input capacitance, C IN , is needed to ?lter the trapezoidal
wave current at the source of the top MOSFET. To prevent
large voltage transients from occurring, a low ESR input
capacitor sized for the maximum RMS current should be
used. The maximum RMS current is given by:
RMS current handling requirements. Dry tantalum, special
polymer, aluminum electrolytic and ceramic capacitors are
all available in surface mount packages. Special polymer
capacitors offer very low ESR but have lower capacitance
density than other types. Tantalum capacitors have the
highest capacitance density but it is important to only use
types that have been surge tested for use in switching
power supplies. Aluminum electrolytic capacitors have
signi?cantly higher ESR, but can be used in cost-sensitive
applications provided that consideration is given to ripple
current ratings and long term reliability. Ceramic capaci-
tors have excellent low ESR characteristics but can have a
high voltage coef ?cient and audible piezoelectric effects.
The high Q of ceramic capacitors with trace inductance
can also lead to signi?cant ringing.
Using Ceramic Input and Output Capacitors
I RMS = I OUT(MAX) OUT
V
V IN
V IN
V OUT
–1
Higher values, lower cost ceramic capacitors are now
becoming available in smaller case sizes. Their high ripple
current, high voltage rating and low ESR make them ideal
This formula has a maximum at V IN = 2V OUT , where I RMS =
I OUT /2. This simple worst-case condition is commonly used
for design because even signi?cant deviations do not offer
much relief. Note that ripple current ratings from capacitor
manufacturers are often based on only 2000 hours of life
which makes it advisable to further derate the capacitor,
or choose a capacitor rated at a higher temperature than
required. Several capacitors may also be paralleled to meet
size or height requirements in the design.
The selection of C OUT is determined by the effective series
resistance (ESR) that is required to minimize voltage ripple
and load step transients as well as the amount of bulk
capacitance that is necessary to ensure that the control
loop is stable. Loop stability can be checked by viewing
the load transient response as described in a later section.
The output ripple, Δ V OUT , is determined by:
for switching regulator applications. However, care must
be taken when these capacitors are used at the input and
output. When a ceramic capacitor is used at the input and
the power is supplied by a wall adapter through long wires,
a load step at the output can induce ringing at the input,
V IN . At best, this ringing can couple to the output and be
mistaken as loop instability. At worst, a sudden inrush
of current through the long wires can potentially cause a
voltage spike at V IN large enough to damage the part.
When choosing the input and output ceramic capacitors,
choose the X5R or X7R dielectric formulations. These
dielectrics have the best temperature and voltage charac-
teristics of all the ceramics for a given value and size.
Output Voltage Programming
The output voltage is set by an external resistive divider
according to the following equation:
V OUT
I L ESR +
1
8fC OUT
V OUT = 0.8 1 +
R2
R1
The output ripple is highest at maximum input voltage
since Δ I L increases with input voltage. Multiple capacitors
placed in parallel may be needed to meet the ESR and
The resistive divider allows pin V FB to sense a fraction of
the output voltage as shown in Figure 1.
3418fb
10
相关PDF资料 |
PDF描述 |
|---|---|
| LTC3419IMS-1#TRPBF | IC REG BUCK SYNC ADJ 0.6A 10MSOP |
| LTC3421EUF#TRPBF | IC REG BOOST SYNC ADJ 1.5A 24QFN |
| LTC3422EDD#TRPBF | IC REG BOOST SYNC ADJ 1.5A 10DFN |
| LTC3424EMS#TR | IC REG BOOST SYNC ADJ 2A 10MSOP |
| LTC3425EUH#TRPBF | IC REG BOOST SYNC ADJ 5A 32QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC3419 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual Monolithic 600mA Synchronous Step-Down Regulator |
| LTC3419EDD | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual Monolithic 600mA Synchronous Step-Down Regulator |
| LTC3419EDD#PBF | 功能描述:IC REG BUCK SYNC ADJ .6A DL 8DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON（1.45x1） 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2 |
| LTC3419EDD#TRPBF | 功能描述:IC REG BUCK SYNC ADJ .6A DL 8DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:升压（升压） 输出类型:可调式 输出数:1 输出电压:1.24 V ~ 30 V 输入电压:1.5 V ~ 12 V PWM 型:电流模式，混合 频率 - 开关:600kHz 电流 - 输出:500mA 同步整流器:无 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 包装:带卷 (TR) 供应商设备封装:8-SOIC |
| LTC3419EDD-1 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual Monolithic 600mA Synchronous Step-Down Regulator |
发布紧急采购，3分钟左右您将得到回复。