- 您现在的位置：买卖IC网 > PDF目录1829 > LTC3458EDE#TRPBF (Linear Technology)IC REG BOOST SYNC ADJ 1.4A 12DFN PDF资料下载
参数资料
| 型号： | LTC3458EDE#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 11/16页 |
| 文件大小： | 0K |
| 描述： | IC REG BOOST SYNC ADJ 1.4A 12DFN |
| 标准包装： | 2,500 |
| 类型： | 升压（升压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 2 V ~ 7.5 V |
| 输入电压： | 1.5 V ~ 6 V |
| PWM 型： | 电流模式，混合 |
| 频率 - 开关： | 1.5MHz |
| 电流 - 输出： | 1.4A |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 12-WFDFN 裸露焊盘 |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 12-DFN（4x3） |
LTC3458
APPLICATIO S I FOR ATIO
TOKO: D62CB and D63LCB Series
COMPONENT SELECTION
Inductor Selection
The high frequency operation of the LTC3458 allows for
the use of small surface mount inductors. Since the
internal slope compensation circuit relies on the inductor’s
current slope and frequency, Table 1 should be used to
select an inductor value for a given frequency of operation
( ± 25%). The recommended value will yield optimal tran-
sient performance while maintaining stable operation.
Inductor values larger than listed in Table 1 are permis-
sible to reduce the current ripple.
Table 1. Recommended Inductor Values
Some example inductor part types are:
Coilcraft: DO1608 and MSS5131 Series
TDK: RLF5018T and SLF7045 Series
Murata: LQH4C and LQN6C Series
Sumida: CDRH4D28 and CDRH6D28 Series
COEV: DQ7545 Series
..
WURTH: WE-PD2 Series
Output Capacitor Selection
The output voltage ripple has three components to it. The
bulk value of the capacitor is set to reduce the ripple due
to charge into the capacitor each cycle. The max ripple due
Frequency
Inductor Value( μ H)
to charge is given by:
1.5MHz
1.25MHz
1MHz
3.3 to 4.7
4.7 to 6.8
6.8 to 10
V RBULK =
I P ? V IN
C OUT ? V OUT ? f
750Hz
500kHz
10 to 15
15 to 22
where I P = peak inductor current and f = switching
frequency.
For high efficiency, choose an inductor with high fre-
quency core material, such as ferrite, to reduce core
losses. The inductor should have low ESR (equivalent
series resistance) to reduce the I 2 R losses, and must be
able to handle the peak inductor current without saturat-
ing. Molded chokes or chip inductors usually do not have
enough core to support peak inductor currents in the
1A to 3A region. To minimize radiated noise, use a
toroidal or shielded inductor. (Note that the inductance of
shielded types will drop more as current increases, and
will saturate more easily). See Table 2 for a list of inductor
manufacturers.
Table 2. Inductor Vendor Information
The ESR (equivalent series resistance) is usually the most
dominant factor for ripple in most power converters. The
ripple due to capacitor ESR is given by:
V RCESR = I P ? C ESR
where C ESR = Capacitor Series Resistance.
The ESL (equivalent series inductance) is also an impor-
tant factor for high frequency converters. Using small,
surface mount ceramic capacitors, placed as close as
possible to the V OUT pins, will minimize ESL.
Low ESR/ESL capacitors should be used to minimize
output voltage ripple. For surface mount applications, AVX
TPS Series tantalum capacitors, Sanyo POSCAP, or Taiyo
Supplier
Coilcraft
TDK
Murata
Sumida
COEV
Toko
..
Wurth
Phone
(847) 639-6400
(847) 803-6100
USA: (814) 237-1431
(800) 831-9172
USA: (847) 956-0666
Japan: 81-3-3607-5111
(800) 227-7040
(847) 297-0070
(202) 785-8800
Website
www.coilcraft.com
www.component.tdk.com
www.murata.com
www.japanlink.com/sumida
www.coev.net
www.tokoam.com
www.we-online.com
Yuden X5R type ceramic capacitors are recommended.
For through-hole applications, Sanyo OS-CON capacitors
offer low ESR in a small package size.
In all applications, a minimum of 4.7 μ F (generally 22 μ F is
recommended), low ESR ceramic capacitor should be
placed as close to the V OUT pin as possible, and grounded
to a local ground plane.
3458fa
11
相关PDF资料 |
PDF描述 |
|---|---|
| LTC3459EDCB#TRPBF | IC REG BOOST SYNC ADJ 6DFN |
| LTC3499BEDD#TRPBF | IC REG BOOST SYNC ADJ 0.75A 8DFN |
| LTC3520EUF#PBF | IC REG BUCK BOOST SYNC ADJ 24QFN |
| LTC3521IFE#TRPBF | IC REG BUCK BST SYNC ADJ 20TSSOP |
| LTC3522EUD#TRPBF | IC REG BUCK BOOST SYNC ADJ 16QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC3458L | 制造商:LINER 制造商全称:Linear Technology 功能描述:1.7A, 1.5MHz Synchronous Step-Up DC/DC Converter with Output Disconnect |
| LTC3458LEDE | 功能描述:IC REG BOOST SYNC ADJ 1.4A 12DFN RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
| LTC3458LEDE#PBF | 功能描述:IC REG BOOST SYNC ADJ 1.4A 12DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
| LTC3458LEDE#TRPBF | 功能描述:IC REG BOOST SYNC ADJ 1.4A 12DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
| LTC3459 | 制造商:LINER 制造商全称:Linear Technology 功能描述:1.2MHz Step-Up DC/DC Converter in SOT-23 |
发布紧急采购，3分钟左右您将得到回复。