参数资料
型号: LTC3490ES8#PBF
厂商: Linear Technology
文件页数: 8/12页
文件大小: 0K
描述: IC LED DRIVER PHOTO FLASH 8-SOIC
标准包装: 100
恒定电流:
拓扑: PWM,升压(升压)
输出数: 1
内部驱动器:
类型 - 主要: 闪灯/白光
类型 - 次要: 白色 LED
频率: 1MHz ~ 1.6MHz
电源电压: 1 V ~ 3.2 V
输出电压: 2.8 V ~ 4 V
安装类型: 表面贴装
封装/外壳: 8-SOIC(0.154",3.90mm 宽)
供应商设备封装: 8-SOIC
包装: 管件
工作温度: -40°C ~ 85°C
产品目录页面: 1339 (CN2011-ZH PDF)
LTC3490
APPLICATIO S I FOR ATIO
The output ripple voltage has two primary components.
The first is due to the value of the capacitor and is given by:
Component values will be calculated for 1 or 2 NiMH cells
and assumes the end-of-charge voltage to be 0.9V per cell.
The operating frequency is assumed to be 1MHz, the
VR CAP =
I LPK ? V IN
C ? V OUT ? f
worst-case low frequency. The allowed inductor ripple
current is 0.31A. Table 3 shows a summary of the key
parameters.
The second is due to the capacitor ESR:
Table 3. Summary of Key Parameters
IR LED =
= I OUT +
IR LE D
VR ESR = I LPK ? R ESR
The LED current ripple and peak pulsed current are calcu-
lated by:
VR CAP ? VR ESR
R SENSE + R LED
I PPFC
2
where:
R SENSE = Internal Sense Resistor = 0.1 ?
PARAMETER
L MIN
Choose L
I IN
I LPK
Choose C
Cap ESR
VR CAP
VR ESR
IR LED
I PPFC
1-CELL
2.2
3.3
1.56
1.93
4.7
5
0.09
0.01
0.10
0.40
2-CELL
3.2
3.3
0.78
0.96
4.7
5
0.09
0.005
0.09
0.39
UNITS
μ H
μ H
A
A
μ F
m ?
V
V
A
A
R LED = Dynamic Impedance of the LED
Low ESR capacitors should be used to minimize output
ripple. Ceramic X5R or X7R type capacitors are recom-
mended. See Table 2 for a list of component suppliers.
where:
I LPK is the peak inductor current
VR CAP is the ripple voltage due to the output capacitor
value
Table 2. Capacitor Information
CAPACITOR PART NUMBER
TDK C2012X5R0J475K
AVX 1210ZC475MAT
Taiyo Yuden CELMK316BJ475ML
DESCRIPTION
4.7 μ F, 6.3V, X5R in 0805
4.7 μ F, 10V, X7R in 1210
4.7 μ F, 10V, X7R in 1206
VR ESR is the ripple voltage due to the output capacitor
ESR
IR LED is the LED current ripple
I PPFC is the LED peak pulsed forward current
PC Board Layout Checklist
Input Capacitor Selection
Most battery-powered applications do not need an input
capacitor. In supply-powered applications or battery ap-
plications with long leads to the battery, a low ESR 3.3 μ F
capacitor reduces switching noise and peak currents.
Design Example
The example will use a Lumileds DS25 white LED. The key
specifications are:
Keep the inductor and output capacitor as close to the IC
as possible. Make traces as short and wide as is feasible.
Parasitic resistance and inductance reduce efficiency and
increase ripple.
Keep resistance in the battery connections as low as
possible. In single cell applications, only 0.1 ? in the
battery connections will have a dramatic effect in effi-
ciency and battery life. I 2 R losses can exceed 100mW and
the converter operates lower on the efficiency curve.
V F (at I F = 350mA) = 3.4 ± 0.6V
R LED = 1 ?
Peak Pulsed Forward Current = 0.5A
3490fa
8
相关PDF资料
PDF描述
DBL17W2P500P30LF CONN DSUB PLUG 17W2 T/H R/A GOLD
MIC4832YMM IC DRIVER LN 220VP-P EL 8-MSOP
TAJY686M016RNJ CAP TANT 68UF 16V 20% 2917
RSA40DRMT CONN EDGECARD 80POS .125 SQ WW
RMA40DRMT CONN EDGECARD 80POS .125 SQ WW
相关代理商/技术参数
参数描述
LTC3499 制造商:LINER 制造商全称:Linear Technology 功能描述:750mA Synchronous Step-Up DC/DC Converters with Reverse-Battery Protection
LTC3499B 制造商:LINER 制造商全称:Linear Technology 功能描述:750mA Synchronous Step-Up DC/DC Converters with Reverse-Battery Protection
LTC3499BEDD 制造商:LINER 制造商全称:Linear Technology 功能描述:750mA Synchronous Step-Up DC/DC Converters with Reverse-Battery Protection
LTC3499BEDD#PBF 功能描述:IC REG BOOST SYNC ADJ 0.75A 8DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压(降压) 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON(1.45x1) 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2
LTC3499BEDD#TR 制造商:Linear Technology 功能描述:Conv DC-DC Single Step Up 1.8V to 5.5V 8-Pin DFN EP T/R