- 您现在的位置：买卖IC网 > PDF目录69007 > LTC3605IUF#TRPBF (LINEAR TECHNOLOGY CORP) 7.5 A SWITCHING REGULATOR, 4000 kHz SWITCHING FREQ-MAX, PQCC24 PDF资料下载
参数资料
| 型号： | LTC3605IUF#TRPBF |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 稳压器 |
| 英文描述： | 7.5 A SWITCHING REGULATOR, 4000 kHz SWITCHING FREQ-MAX, PQCC24 |
| 封装： | 4 X 4 MM, LEAD FREE, PLASTIC, MO-220WGGD, QFN-24 |
| 文件页数： | 6/22页 |
| 文件大小： | 257K |
| 代理商： | LTC3605IUF#TRPBF |
LTC3605
14
3605fb
OPERATION
system. It is very important to include these “system”
level losses in the design of a system. Transition loss
arises from the brief amount of time the top power
MOSFET spends in the saturated region during switch
node transitions. The LTC3605 internal power devices
switch quickly enough that these losses are not signi-
cant compared to other sources. Other losses including
diode conduction losses during dead-time and inductor
core losses which generally account for less than 2%
total additional loss.
Thermal Considerations
In a majority of applications, the LTC3605 does not dis-
sipate much heat due to its high efciency and low thermal
resistance of its exposed-back QFN package. However, in
applications where the LTC3605 is running at high ambi-
ent temperature, high VIN, high switching frequency and
maximum output current load, the heat dissipated may
exceed the maximum junction temperature of the part.
If the junction temperature reaches approximately 160°C,
both power switches will be turned off until the temperature
drops about 15°C cooler.
To avoid the LTC3605 from exceeding the maximum junc-
tion temperature, the user will need to do some thermal
analysis. The goal of the thermal analysis is to determine
whether the power dissipated exceeds the maximum
junction temperature of the part. The temperature rise is
given by:
TRISE = PD θJA
As an example, consider the case when the LTC3605 is
used in applications where VIN = 12V, IOUT = 5A, f = 1MHz,
VOUT = 1.8V. The equivalent power MOSFET resistance
RSW is:
R
SW = RDS(ON)Top
V
OUT
V
IN
+R
DS(ON)Bot 1–
V
OUT
V
IN
= 70mΩ
1.8
12
+ 35mΩ
10.2
12
= 40.25mΩ
The VIN current during 1MHz force continuous operation
with no load is about 11mA, which includes switching
and internal biasing current loss, transition loss, inductor
core loss and other losses in the application. Therefore,
the total power dissipated by the part is:
PD = IOUT2 RSW + VIN IVIN (No Load)
= 25A2 40.25mΩ + 12V 11mA = 1.14W
The QFN 4mm
×4mmpackagejunction-to-ambientthermal
resistance,
θJA, is around 37°C/W. Therefore, the junction
temperature of the regulator operating in a 25°C ambient
temperature is approximately:
TJ = 1.14W 37°C/W + 25°C = 67°C
Remembering that the above junction temperature is
obtained from an RDS(ON) at 25°C, we might recalculate
the junction temperature based on a higher RDS(ON) since
it increases with temperature. Redoing the calculation
assuming that RSW increased 15% at 67°C yields a new
junction temperature of 72°C. If the application calls for
a higher ambient temperature and/or higher switching
frequency, care should be taken to reduce the temperature
rise of the part by using a heat sink or air ow. Figure 2
is a temperature derating curve based on the DC1215
demo board.
AMBIENT TEMPERATURE (°C)
20
0
LOAD
CURRENT
(A)
1
2
3
4
6
40
60
80
100
3605 F02
120
140
5
VIN = 12V
VOUT = 3.3V
fSW = 1MHz
DC1215 DEMO BOARD
Figure 2. Load Current vs Ambient Temperature
Junction Temperature Measurement
The junction-to-ambient thermal resistance will vary de-
pending on the size and amount of heat sinking copper
on the PCB board where the part is mounted, as well as
the amount of air ow on the device. One of the ways to
相关PDF资料 |
PDF描述 |
|---|---|
| LTC3675EUFF#TRPBF | POWER SUPPLY SUPPORT CKT, PQCC44 |
| LTC3727AIG-1#TR | 3 A SWITCHING CONTROLLER, 580 kHz SWITCHING FREQ-MAX, PDSO28 |
| LTC3727AIG-1#TRPBF | 3 A SWITCHING CONTROLLER, 580 kHz SWITCHING FREQ-MAX, PDSO28 |
| LTC3727AIG-1#PBF | 3 A SWITCHING CONTROLLER, 580 kHz SWITCHING FREQ-MAX, PDSO28 |
| LTC3736-2EUF#PBF | SWITCHING CONTROLLER, PDSO24 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC3606BEDD#PBF | 功能描述:IC REG BUCK SYNC ADJ 0.8A 8DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON（1.45x1） 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2 |
| LTC3606BEDD#PBF | 制造商:Linear Technology 功能描述:IC SYNC STEP-DOWN DC/DC CONVERTER DFN8 |
| LTC3606BEDD#TRPBF | 功能描述:IC REG BUCK SYNC ADJ 0.8A 8DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:升压（升压） 输出类型:可调式 输出数:1 输出电压:1.24 V ~ 30 V 输入电压:1.5 V ~ 12 V PWM 型:电流模式，混合 频率 - 开关:600kHz 电流 - 输出:500mA 同步整流器:无 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 包装:带卷 (TR) 供应商设备封装:8-SOIC |
| LTC3606BIDD#PBF | 功能描述:IC REG BUCK SYNC ADJ 0.8A 8DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
| LTC3606BIDD#TRPBF | 功能描述:IC REG BUCK SYNC ADJ 0.8A 8DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
发布紧急采购，3分钟左右您将得到回复。