- 您现在的位置：买卖IC网 > PDF目录16302 > LTC4008EGN-1#PBF (Linear Technology)IC BATT CHARGER CTRLR 4A 20SSOP PDF资料下载
参数资料
| 型号： | LTC4008EGN-1#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 19/24页 |
| 文件大小： | 0K |
| 描述： | IC BATT CHARGER CTRLR 4A 20SSOP |
| 标准包装： | 55 |
| 功能： | 充电管理 |
| 电池化学： | 多化学 |
| 电源电压： | 6 V ~ 28 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-SSOP（0.209"，5.30mm 宽） |
| 供应商设备封装： | 20-SSOP |
| 包装： | 管件 |
| 产品目录页面： | 1341 (CN2011-ZH PDF) |
LTC4008
APPLICATIONS INFORMATION
Disabling the Thermistor Function
If the thermistor is not needed, connecting a resistor be-
tween DCIN and NTC will disable it. The resistor should be
sized to provide at least 10μA with the minimum voltage
applied to DCIN and 10V at NTC. Do not exceed 30μA.
Generally, a 301k resistor will work for DCIN less than
15V. A 499k resistor is recommended for DCIN between
15V and 24V.
Using the LTC4008-1 (Refer to Figure 10)
The LTC4008-1 is intended for applications where the
battery power is fully isolated from the charger and wall
adapter connections. An example application is a system
with multiple batteries such that the charger’s output power
passes through a downstream power path or selector
system. Typically these systems also provide isolation
and control the wall adapter power. To reduce cost in such
systems, the LTC4008-1 removes the requirement for the
wall adapter INFET function or blocking diode. Wall adapter
or ACP detection is also removed along with micropower
shutdown mode. Asserting of the SHDN pin only puts the
charger into standby mode. Failure to isolate the battery
power from ANY of the LTC4008-1 pins when wall adapter
power is removed or lost will only drain the battery at the
IC quiescent current rate. More speci?cally, high current
is drawn from the DCIN, CLP and CLN pins. Suggested
devices to isolate power from the charger include simple
diodes, electrical or mechanical switches or power path
control devices such as the LTC4412 low loss PowerPath?
controller.
Because the switcher operation is continuous under nearly
all conditions, precautions must be taken to prevent the
charger from boosting the input voltage above maximum
voltage values on the input capacitors or adapter. Z1 and
Q3 will shut down the charger if the input voltage exceeds
a safe value.
4008fb
19
相关PDF资料 |
PDF描述 |
|---|---|
| M3BYK-1606R | IDC CABLE - MSR16K/MC16M/MPD16K |
| M1YXK-2436J | IDC CABLE - MPD24K/MC24G/X |
| LTC4006EGN-6#PBF | IC CHARGER BATTERY 4A 16-SSOP |
| M2MXH-6018R | IDC CABLE - MDM60H/MC60M/X |
| M3UYK-1606J | IDC CABLE - MKS16K/MC16G/MPD16K |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4008EGNPBF | 制造商:Linear Technology 功能描述:4A, High Eff Li-Ion Charger LTC4008EGN |
| LTC4009 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Voltage High Current Controller for Battery Charging and Power Management |
| LTC4009-1 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Effi ciency, Multi-Chemistry Battery Charger |
| LTC4009-2 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Effi ciency, Multi-Chemistry Battery Charger |
| LTC4009CUF#PBF | 功能描述:IC CHARGER BATTERY MC 20-QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 其它有关文件:STC3100 View All Specifications 特色产品:STC3100 - Battery Monitor IC 标准包装:4,000 系列:- 功能:燃料，电量检测计/监控器 电池化学:锂离子（Li-Ion） 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-MiniSO 包装:带卷 (TR) 其它名称:497-10526-2 |
发布紧急采购，3分钟左右您将得到回复。