- 您现在的位置：买卖IC网 > PDF目录16302 > LTC4008EGN-1#PBF (Linear Technology)IC BATT CHARGER CTRLR 4A 20SSOP PDF资料下载
参数资料
| 型号： | LTC4008EGN-1#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 21/24页 |
| 文件大小： | 0K |
| 描述： | IC BATT CHARGER CTRLR 4A 20SSOP |
| 标准包装： | 55 |
| 功能： | 充电管理 |
| 电池化学： | 多化学 |
| 电源电压： | 6 V ~ 28 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-SSOP（0.209"，5.30mm 宽） |
| 供应商设备封装： | 20-SSOP |
| 包装： | 管件 |
| 产品目录页面： | 1341 (CN2011-ZH PDF) |
LTC4008
APPLICATIONS INFORMATION
PCB Layout Considerations
For maximum ef?ciency, the switch node rise and fall times
should be minimized. To prevent magnetic and electrical
?eld radiation and high frequency resonant problems,
proper layout of the components connected to the IC is
essential. (See Figure 11.) Here is a PCB layout priority
list for proper layout. Layout the PCB using this speci?c
order.
1. Input capacitors need to be placed as close as possible
to switching FET’s supply and ground connections.
Shortest copper trace connections possible. These
parts must be on the same layer of copper. Vias must
not be used to make this connection.
2. The control IC needs to be close to the switching FET ’s
gate terminals. Keep the gate drive signals short for
a clean FET drive. This includes IC supply pins that
connect to the switching FET source pins. The IC can
be placed on the opposite side of the PCB relative to
above.
3. Place inductor input as close as possible to switching
FET’s output connection. Minimize the surface area of
this trace. Make the trace width the minimum amount
needed to support current—no copper ?lls or pours.
Avoid running the connection using multiple layers in
parallel. Minimize capacitance from this node to any
other trace or plane.
4. Place the output current sense resistor right next to
the inductor output but oriented such that the IC’s
current sense feedback traces going to resistor are not
long. The feedback traces need to be routed together
as a single pair on the same layer at any given time
with smallest trace spacing possible. Locate any ?lter
component on these traces next to the IC and not at
5. Place output capacitors next to the sense resistor
output and ground.
6. Output capacitor ground connections need to feed
into same copper that connects to the input capacitor
ground before tying back into system ground.
7. Connection of switching ground to system ground or
internal ground plane should be single point. If the
system has an internal system ground plane, a good
way to do this is to cluster vias into a single star point
to make the connection.
8. Route analog ground as a trace tied back to IC ground
(analog ground pin if present) before connecting to any
other ground. Avoid using the system ground plane.
CAD trick: make analog ground a separate ground net
and use a 0Ω resistor to tie analog ground to system
ground.
9. A good rule of thumb for via count for a given high
current path is to use 0.5A per via. Be consistent.
10. If possible, place all the parts listed above on the same
PCB layer.
11. Copper ?lls or pours are good for all power connections
except as noted above in Rule 3. You can also use
copper planes on multiple layers in parallel too—this
helps with thermal management and lower trace
inductance improving EMI performance further.
12. For best current programming accuracy provide a
Kelvin connection from R SENSE to CSP and BAT. See
Figure 12 as an example.
It is important to keep the parasitic capacitance on the R T ,
CSP and BAT pins to a minimum. The traces connecting
these pins to their respective resistors should be as short
as possible.
the sense resistor location.
4008fb
21
相关PDF资料 |
PDF描述 |
|---|---|
| M3BYK-1606R | IDC CABLE - MSR16K/MC16M/MPD16K |
| M1YXK-2436J | IDC CABLE - MPD24K/MC24G/X |
| LTC4006EGN-6#PBF | IC CHARGER BATTERY 4A 16-SSOP |
| M2MXH-6018R | IDC CABLE - MDM60H/MC60M/X |
| M3UYK-1606J | IDC CABLE - MKS16K/MC16G/MPD16K |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4008EGNPBF | 制造商:Linear Technology 功能描述:4A, High Eff Li-Ion Charger LTC4008EGN |
| LTC4009 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Voltage High Current Controller for Battery Charging and Power Management |
| LTC4009-1 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Effi ciency, Multi-Chemistry Battery Charger |
| LTC4009-2 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Effi ciency, Multi-Chemistry Battery Charger |
| LTC4009CUF#PBF | 功能描述:IC CHARGER BATTERY MC 20-QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 其它有关文件:STC3100 View All Specifications 特色产品:STC3100 - Battery Monitor IC 标准包装:4,000 系列:- 功能:燃料，电量检测计/监控器 电池化学:锂离子（Li-Ion） 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-MiniSO 包装:带卷 (TR) 其它名称:497-10526-2 |
发布紧急采购，3分钟左右您将得到回复。