- 您现在的位置：买卖IC网 > PDF目录44995 > LTC4012IUF-3#TRPBF (LINEAR TECHNOLOGY CORP) BATTERY CHARGE CONTROLLER, 633 kHz SWITCHING FREQ-MAX, PQCC20 PDF资料下载
参数资料
| 型号： | LTC4012IUF-3#TRPBF |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 稳压器 |
| 英文描述： | BATTERY CHARGE CONTROLLER, 633 kHz SWITCHING FREQ-MAX, PQCC20 |
| 封装： | 4 X 4 MM, 0.75 MM HEIGHT, LEAD FREE, PLASTIC, MO-220WGGD-1, QFN-20 |
| 文件页数： | 18/28页 |
| 文件大小： | 369K |
| 代理商： | LTC4012IUF-3#TRPBF |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页当前第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
40123fb
LTC4012-3
3. Place the inductor input as close as possible to the
switchingFETs.Minimizethesurfaceareaoftheswitch
node. Make the trace width the minimum needed to
support the programmed charge current. Use no cop-
per fills or pours. Avoid running the connection on
multiplecopperlayersinparallel.Minimizecapacitance
from the switch node to any other trace or plane.
4. Place the charge current sense resistor immediately
adjacent to the inductor output, and orient it such that
current sense traces to the LTC4012-3 are not long.
These feedback traces need to be run together as a
single pair with the smallest spacing possible on any
given layer on which they are routed. Locate any filter
component on these traces next to the LTC4012-3,
and not at the sense resistor location.
5. Place output capacitors adjacent to the sense resistor
output and ground.
6. Output capacitor ground connections must feed into
the same copper that connects to the input capacitor
ground before connecting back to system ground.
7. Connection of switching ground to system ground,
or any internal ground plane, should be single-point.
If the system has an internal system ground plane,
a good way to do this is to cluster vias into a single
star point to make the connection.
8. Route analog ground as a trace tied back to the
LTC4012-3 GND pin and paddle before connecting
to any other ground. Avoid using the system ground
plane. A useful CAD technique is to make analog
ground a separate ground net and use a 0
Ω resistor
to connect analog ground to system ground.
9. A good rule of thumb for via count in a given high
current path is to use 0.5A per via. Be consistent when
applying this rule.
10. If possible, place all the parts listed above on the same
PCB layer.
11. Copperfillsorpoursaregoodforallpowerconnections
except as noted above in Rule 3. Copper planes on
multiple layers can also be used in parallel. This helps
withthermalmanagementandlowerstraceinductance,
which further improves EMI performance.
12. For best current programming accuracy, provide a
Kelvin connection from RSENSE to CSP and CSN. See
Figure 13 for an example.
13. It is important to minimize parasitic capacitance on
the CSP and CSN pins. The traces connecting these
pins to their respective resistors should be as short
as possible.
applicaTions inForMaTion
Figure 13. Kelvin Sensing of Charge Current
TO CSP
RIN
4012 F13
DIRECTION OF CHARGING CURRENT
RSENSE
TO CSN
RIN
相关PDF资料 |
PDF描述 |
|---|---|
| LTC4012IUF#TRPBF | SWITCHING CONTROLLER, 633 kHz SWITCHING FREQ-MAX, PQCC20 |
| LTC4012IUF-1#TRPBF | SWITCHING CONTROLLER, 633 kHz SWITCHING FREQ-MAX, PQCC20 |
| LTC4012IUF#PBF | SWITCHING CONTROLLER, 633 kHz SWITCHING FREQ-MAX, PQCC20 |
| LTC4065EDC-4.4#PBF | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6 |
| LTC4070IDDB#TRPBF | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4020EUHF#PBF | 制造商:Linear Technology 功能描述:Battery Charger Lead-Acid/Li-FePO4/Li-Ion/Li-Pol 20000mA 55V 38-Pin QFN EP 制造商:Linear Technology 功能描述:IC BATT CHARGER 55V BB 38QFN 制造商:Linear Technology 功能描述:BATTERY CHARGER, 20A, QFN-38 制造商:Linear Technology 功能描述:BATTERY CHARGER, 20A, QFN-38, Input Voltage:55V, Battery Charge Voltage:55V, Charge Current Max:20A, Battery IC Case Style:QFN, No. of Pins:38, No. of Series Cells:12, Operating Temperature Min:-40C, Operating Temperature Max:125C , RoHS Compliant: Yes |
| LTC4020EUHF#TRPBF | 制造商:Linear Technology 功能描述:Battery Charger Lead-Acid/Li-FePO4/Li-Ion/Li-Pol 20000mA 55V 38-Pin QFN EP T/R 制造商:Linear Technology 功能描述:IC BATT CHARGER 55V BB 38QFN 制造商:Linear Technology 功能描述:BATTERY CHARGER, 20A, QFN-38, Input Voltage:55V, Battery Charge Voltage:55V, Charge Current Max:20A, Battery IC Case Style:QFN, No. of Pins:38, No. of Series Cells:12, Operating Temperature Min:-40C, Operating Temperature Max:125C , RoHS Compliant: Yes |
| LTC4020IUHF#PBF | 制造商:Linear Technology 功能描述:Battery Charger Lead-Acid/Li-FePO4/Li-Ion/Li-Pol 20000mA 55V 38-Pin QFN EP 制造商:Linear Technology 功能描述:IC BATT CHARGER 55V BB 38QFN 制造商:Linear Technology 功能描述:BATTERY CHARGER, 20A, QFN-38 制造商:Linear Technology 功能描述:BATTERY CHARGER, 20A, QFN-38, Input Voltage:55V, Battery Charge Voltage:55V, Charge Current Max:20A, Battery IC Case Style:QFN, No. of Pins:38, No. of Series Cells:12, Operating Temperature Min:-40C, Operating Temperature Max:125C , RoHS Compliant: Yes |
| LTC4020IUHF#TRPBF | 制造商:Linear Technology 功能描述:Battery Charger Lead-Acid/Li-FePO4/Li-Ion/Li-Pol 20000mA 55V 38-Pin QFN EP T/R 制造商:Linear Technology 功能描述:IC BATT CHARGER 55V BB 38QFN 制造商:Linear Technology 功能描述:BATTERY CHARGER, 20A, QFN-38, Input Voltage:55V, Battery Charge Voltage:55V, Charge Current Max:20A, Battery IC Case Style:QFN, No. of Pins:38, No. of Series Cells:12, Operating Temperature Min:-40C, Operating Temperature Max:125C , RoHS Compliant: Yes |
| LTC4050 | 制造商:LINEAR 制造商全称:LINEAR 功能描述:Standalone 250mA Li-Ion Battery Charger in 2 × 2 DFN |
发布紧急采购，3分钟左右您将得到回复。