- 您现在的位置：买卖IC网 > PDF目录69007 > LTC4065LEDC#PBF (LINEAR TECHNOLOGY CORP) 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6 PDF资料下载
参数资料
| 型号： | LTC4065LEDC#PBF |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 电源管理 |
| 英文描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6 |
| 封装： | 2 X 2 MM, 0.75 MM HEIGHT, LEAD FREE, EXPOSED PAD, PLASTIC, MO-229WCCD-2, DFN-6 |
| 文件页数： | 13/16页 |
| 文件大小： | 168K |
| 代理商： | LTC4065LEDC#PBF |
6
LTC4065L/LTC4065LX
4065lxfa
UU
U
PI FU CTIO S
GND (Pin 1): Ground.
CHRG (Pin 2): Open-Drain Charge Status Output. The
charge status indicator pin has three states: pull-down,
pulse at 2Hz and high impedance state. This output can be
used as a logic interface or as an LED driver. When the
battery is being charged, the CHRG pin is pulled low by an
internal N-channel MOSFET. When the charge current
drops to 10% of the full-scale current, the CHRG pin is
forced to a high impedance state. If the battery voltage
remains below 2.9V for one quarter of the charge time, the
battery is considered defective and the CHRG pin pulses at
a frequency of 2Hz.
BAT (Pin 3): Charge Current Output. Provides charge
current to the battery and regulates the final float voltage
to 4.2V. An internal precision resistor divider on this pin
sets the float voltage and is disconnected in shutdown
mode.
VCC (Pin 4): Positive Input Supply Voltage. This pin
provides power to the charger. VCC can range from 3.75V
to 5.5V. This pin should be bypassed with at least a 1
F
capacitor. When VCC is within 32mV of the BAT pin
voltage, the LTC4065L enters shutdown mode, dropping
IBAT to about 1A.
EN (Pin 5): Enable Input Pin. Pulling this pin above the
manual shutdown threshold (VMS is typically 0.82V) puts
the LTC4065L in shutdown mode. In shutdown mode, the
LTC4065L has less than 20
Asupplycurrentandlessthan
1
A battery drain current. Enable is the default state, but
the pin should be tied to GND if unused.
PROG (Pin 6): Charge Current Program and Charge Cur-
rent Monitor Pin. Connecting a 1% resistor, RPROG, to
ground programs the charge current. When charging in
constant-current mode, this pin servos to 1V. In all modes,
the voltage on this pin can be used to measure the charge
current using the following formula:
I
V
R
BAT
PROG
=
205
Floating the PROG pin sets the charge current to zero.
Exposed Pad (Pin 7): Ground. The Exposed Pad must be
soldered to the PCB ground to provide both electrical con-
tact and rated thermal performance.
相关PDF资料 |
PDF描述 |
|---|---|
| LTC4065LXEDC#TRMPBF | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6 |
| LTC4069EDC-4.4#TRMPBF | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6 |
| LTC4088EDE-1#TR | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO14 |
| LTC4088EDE | 3 A BATTERY CHARGE CONTROLLER, 2.7 kHz SWITCHING FREQ-MAX, PDSO14 |
| LTC4096EDD#PBF | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO10 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4065LX | 制造商:LINER 制造商全称:Linear Technology 功能描述:Standalone 250mA Li-Ion Battery Charger in 2 x 2 DFN |
| LTC4065LXEDC | 制造商:LINER 制造商全称:Linear Technology 功能描述:Standalone 750mA Li-Ion Battery Charger in 2 x 2 DFN |
| LTC4065LXEDC#PBF | 制造商:Linear Technology 功能描述:Battery Charger Li-Ion/Li-Pol 155mA 4.2V 6-Pin DFN EP T/R |
| LTC4065LXEDC#TRPBF | 功能描述:IC CHARGER LI-ION 6-DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:61 系列:- 功能:电源管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:4.35 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:22-WFDFN 裸露焊盘 供应商设备封装:22-DFN（6x3）裸露焊盘 包装:管件 |
| LTC4066 | 制造商:LINER 制造商全称:Linear Technology 功能描述:USB Power Controller and Li-Ion Linear Charger with Low Loss Ideal Diode |
发布紧急采购，3分钟左右您将得到回复。