参数资料
型号: LTC4069EDC-4.4#TRMPBF
厂商: LINEAR TECHNOLOGY CORP
元件分类: 电源管理
英文描述: 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6
封装: 2 X 2 MM, LEAD FREE, PLASTIC, MO-229WCCD-2, DFN-6
文件页数: 13/16页
文件大小: 192K
代理商: LTC4069EDC-4.4#TRMPBF
6
LTC4069-4.4
406944f
UU
U
PI FU CTIO S
GND (Pin 1): Ground.
CHRG (Pin 2): Open-Drain Charge Status Output. The
charge status indicator pin has three states: pull-down,
pulse at 2Hz and high impedance state. This output can be
used as a logic interface or as an LED driver. When the
battery is being charged, the CHRG pin is pulled low by an
internal N-channel MOSFET. The pin becomes high im-
pedance when any of the following conditions occur: the
charge current drops below 10% of full-scale current, the
timer ends, or the charger is shut down. If the battery
voltage remains below 2.9V for one quarter of the charge
time, the battery is considered defective and the CHRG pin
pulses at a frequency of 2Hz (75% duty cycle). When the
NTC pin voltage rises above 0.76 VCC or drops below 0.35
VCC, the CHRG pin pulses at a frequency of 2Hz (25%
duty cycle).
BAT (Pin 3): Charge Current Output. Provides charge
current to the battery and regulates the final float voltage
to 4.4V. An internal precision resistor divider on this pin
sets the float voltage and is disconnected in shutdown
mode.
VCC (Pin 4): Positive Input Supply Voltage. This pin
provides power to the charger. VCC can range from 3.75V
to 5.5V. This pin should be bypassed with at least a 1
F
capacitor. When VCC is within 30mV of the BAT pin
voltage, the LTC4069-4.4 enters shutdown mode, drop-
ping IBAT to about 1A.
NTC (Pin 5): Input to the NTC (Negative Temperature
Coefficient) Thermistor Temperature Monitoring Circuit.
Under normal operation, connect a thermistor from the
NTC pin to ground and a resistor of equal value from the
NTC pin to VCC. When the voltage at this pin drops below
0.35 VCC at hot temperatures or rises above 0.76 VCC at
cold, charging is suspended, the internal timer is frozen
and the CHRG pin output will start to pulse at 2Hz. Pulling
this pin below 0.016 VCC disables the NTC feature. There
is approximately 3
°C of temperature hysteresis associ-
ated with each of the input comparator’s thresholds.
PROG (Pin 6): Charge Current Program and Charge Cur-
rent Monitor Pin. Connecting a 1% resistor, RPROG, to
ground programs the charge current. When charging in
constant-current mode, this pin servos to 1V. In all modes,
the voltage on this pin can be used to measure the charge
current using the following formula:
I
V
R
BAT
PROG
=
1000
Floating the PROG pin puts the charger in shutdown mode.
In shutdown mode, the LTC4069-4.4 has less than 20
A
supply current and about 1
A battery drain current.
Exposed Pad (Pin 7): Ground. The Exposed Pad must be
soldered to the PCB ground to provide both electrical con-
tact and rated thermal performance.
相关PDF资料
PDF描述
LTC4088EDE-1#TR 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO14
LTC4088EDE 3 A BATTERY CHARGE CONTROLLER, 2.7 kHz SWITCHING FREQ-MAX, PDSO14
LTC4096EDD#PBF 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO10
LTC4269CDKD-2#TR SWITCHING CONTROLLER, 560 kHz SWITCHING FREQ-MAX, PDSO32
LTC4269IDKD-2 SWITCHING CONTROLLER, 560 kHz SWITCHING FREQ-MAX, PDSO32
相关代理商/技术参数
参数描述
LTC4069EDC-PBF 制造商:LINER 制造商全称:Linear Technology 功能描述:Standalone 750mA Li-Ion Battery Charger in 2 × 2 DFN with NTC Thermistor Input
LTC4069EDC-TRPBF 制造商:LINER 制造商全称:Linear Technology 功能描述:Standalone 750mA Li-Ion Battery Charger in 2 × 2 DFN with NTC Thermistor Input
LTC4070 制造商:LINEAR 制造商全称:LINEAR 功能描述:Ultralow Voltage Step-Up Converter and Power Manager
LTC4070EDDB 制造商:LINER 制造商全称:Linear Technology 功能描述:Li-Ion/Polymer Shunt Battery Charger System
LTC4070EDDB#PBF 制造商:Linear Technology 功能描述:Battery Charger Li-Ion/Li-Pol 50mA 4.2V 10-Pin DFN EP Bulk 制造商:Linear Technology 功能描述:IC BATTERY CHARGER 50mA DFN-8 制造商:Linear Technology 功能描述:IC, BATTERY CHARGER, 50mA, DFN-8 制造商:Linear Technology 功能描述:IC, BATTERY CHARGER, 50mA, DFN-8; Battery Type:Li-Ion, Li-Polymer; Battery Charge Voltage:4.2V; Charge Current Max:50mA; Battery IC Case Style:DFN; No. of Pins:8; No. of Series Cells:1; Operating Temperature Min:-40C ;RoHS Compliant: Yes