- 您现在的位置：买卖IC网 > PDF目录79982 > LTC4413EDD2#PBF (LINEAR TECHNOLOGY CORP) SPECIALTY ANALOG CIRCUIT, PDSO10 PDF资料下载
参数资料
| 型号： | LTC4413EDD2#PBF |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 模拟信号调理 |
| 英文描述： | SPECIALTY ANALOG CIRCUIT, PDSO10 |
| 封装： | 3 X 3 MM, 0.75 MM HEIGHT, LEAD FREE, PLASTIC, MO-229WEED-2, DFN-10 |
| 文件页数： | 14/16页 |
| 文件大小： | 190K |
| 代理商： | LTC4413EDD2#PBF |
LTC4413-1/LTC4413-2
7
441312fb
PIN FUNCTIONS
INA (Pin 1): Primary Ideal Diode Anode and Positive Power
Supply for LTC4413-1/LTC4413-2. Bypass INA with a ce-
ramic capacitor of at least 1μF. (Series 1Ω snub resistors
and higher valued capacitances are recommended when
large inductances are in series with this input.) This pin
can be grounded when not used. Limit slew rate on this
pin to less than 2.5V/μs.
ENBA (Pin 2): Enable Low for Diode A. Pull this pin high
to shut down this power path. Tie to GND to enable.
Refer to Table 1 for mode control functionality. This pin
can be left oating, a weak (3.5μA) pull-down internal to
LTC4413-1/LTC4413-2 is included.
GND (Pin 3): Power Ground for the IC.
ENBB (Pin 4): Enable Low for Diode B. Pull this pin high
to shut down this power path. Tie to GND to enable.
Refer to Table 1 for mode control functionality. This pin
can be left oating, a weak (3.5μA) pull-down internal to
LTC4413-1/LTC4413-2 is included.
INB (Pin 5): Secondary Ideal Diode Anode and Positive
Power Supply for LTC4413-1/LTC4413-2. Bypass INB with a
ceramic capacitor of at least 1μF. (Series 1Ω snub resistors
and higher valued capacitances are recommended when
large inductances are in series with this input.) This pin
can be grounded when not used. Limit slew rate on this
pin to less than 2.5V/μs.
OUTB (Pin 6): Secondary Ideal Diode Cathode and Output
of the LTC4413-1/LTC4413-2. Bypass OUTB with a high
(1mΩ min) ESR ceramic capacitor of at least 4.7μF. This
pin must be left oating when not in use. Limit slew rate
on this pin to less than 2.5V/μs.
OVP (Pin 7, LTC4413-2 Only): Drive Output for an Exter-
nal OVP Switch PMOS Transistor (To Inhibit Overvoltage
Wall Adapter Voltages from Damaging Device.) During
overvoltage conditions, this output will remain high so
long as an overvoltage condition persists. This pin must
be left oating when not in use.
OVI (Pin 8, LTC4413-2 Only): Sense Input for Overvoltage
Protection Block. This pin can be left oating or grounded
when not used.
STAT (Pin 9): Status Condition Indicator. Weak (11μA)
pull-down current output. When terminated, high indicates
diode conducting. Refer to Table 2 for the operation of this
pin. This pin can also be left oating or grounded.
OUTA (Pin 10): Primary Ideal Diode Cathode and Output
of the LTC4413-1/LTC4413-2. Bypass OUTA with a high
(1mΩ min) ESR ceramic capacitor of at least 4.7μF. This
pin must be left oating when not in use. Limit slew rate
on this pin to less than 2.5V/μs.
Exposed Pad (Pin 11): Signal Ground. This pin must be
soldered to PCB ground to provide both electrical contact
to ground and good thermal contact to PCB.
相关PDF资料 |
PDF描述 |
|---|---|
| LES25A48-2V5AJ | 1-OUTPUT 62.5 W DC-DC REG PWR SUPPLY MODULE |
| LS1001-7PD8 | 1-OUTPUT AC-DC REG PWR SUPPLY MODULE |
| LS1001-9EPD8T | 1-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE |
| LS1001-9ERD9TB1 | 1-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE |
| LS1001-9RV0T | 1-OUTPUT AC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC4413EDDPBF | 制造商:Linear Technology 功能描述:2-ch Ideal Diode OR Contr, LTC4413EDD |
| LTC4414EMS8 | 制造商:Linear Technology 功能描述:Power Controller 8-Pin MSOP |
| LTC4414EMS8#PBF | 功能描述:IC CNTRLR POWERPATH 8-MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - O 圈控制器 系列:PowerPath™ 标准包装:1,000 系列:- 应用:电池备份，工业/汽车，大电流开关 FET 型:- 输出数:5 内部开关:是 延迟时间 - 开启:100ns 延迟时间 - 关闭:- 电源电压:3 V ~ 5.5 V 电流 - 电源:250µA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC N 包装:带卷 (TR) |
| LTC4414EMS8#TR | 制造商:Linear Technology 功能描述:Power Controller 8-Pin MSOP T/R |
| LTC4414EMS8#TRPBF | 功能描述:IC CNTRLR POWERPATH 8-MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - O 圈控制器 系列:PowerPath™ 标准包装:1,000 系列:- 应用:电池备份，工业/汽车，大电流开关 FET 型:- 输出数:5 内部开关:是 延迟时间 - 开启:100ns 延迟时间 - 关闭:- 电源电压:3 V ~ 5.5 V 电流 - 电源:250µA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC N 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。