参数资料
| 型号： | LTC6242CGN#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 17/32页 |
| 文件大小： | 0K |
| 描述： | IC OP AMP QUAD R-R 16-SSOP |
| 标准包装： | 2,500 |
| 放大器类型： | 通用 |
| 电路数： | 4 |
| 输出类型： | 满摆幅 |
| 转换速率： | 10 V/µs |
| 增益带宽积： | 18MHz |
| 电流 - 输入偏压： | 0.2pA |
| 电压 - 输入偏移： | 50µV |
| 电流 - 电源： | 1.8mA |
| 电流 - 输出 / 通道： | 30mA |
| 电压 - 电源，单路/双路(±)： | 2.8 V ~ 6 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SSOP（0.154"，3.90mm 宽） |
| 供应商设备封装： | 16-SSOP |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页
LTC6240/LTC6241/LTC6242
24
624012fe
by the sensor is forced across the feedback capacitor
by the op amp action. Because the feedback capacitor
is 100 times smaller than the sensor, it will be forced to
100 times what would have been the sensor’s open circuit
voltage. So the circuit gain is 100. The benet of this ap-
proach is that the signal gain of the circuit is independent
of any cable capacitance introduced between the sensor
and the amplier. Hence this circuit is favored for remote
accelerometers where the cable length may vary. Difculties
with the circuit are inaccuracy of the gain setting with the
small capacitor, and low frequency cutoff due to the bias
resistor working into the small feedback capacitor.
Figure 12 shows a noninverting amplier approach. This
approach has many advantages. First of all, the gain is set
accurately with resistors rather than with a small capaci-
tor. Second, the low frequency cutoff is dictated by the
bias resistor working into the large 770pF sensor, rather
than into a small feedback capacitor, for lower frequency
response. Third, the noninverting topology can be paral-
leled and summed (as shown) for scalable reductions in
voltage noise. The only drawback to this circuit is that the
parasitic capacitance at the input reduces the gain slightly.
This circuit is favored in cases where parasitic input
capacitances such as traces and cables will be relatively
small and invariant.
The noise measured over a 50 second interval, in Figure 10,
is 40nV in a 0.1Hz to 10Hz bandwidth.This low noise is at-
tributed to the input JFET’s die size and current density.
Figure 11. Classical Inverting Charge Amplier
Figure 12. Low Noise Noninverting Shock Sensor Amplier
Figure 10. Noise in a 0.1Hz to 10Hz Bandwidth
Low Noise Shock Sensor Ampliers
Figures 11 and 12 show the ampliers realizing two dif-
ferent approaches to amplifying signals from a capacitive
sensor. The sensor in both cases is a 770pF piezoelectric
shock sensor accelerometer, which generates charge under
physical acceleration.
Figure 11 shows the classical “charge amplier” approach.
The LTC6240 is in the inverting conguration so the sensor
looks into a virtual ground. All of the charge generated
APPLICATIONS INFORMATION
5s/DIV
6241 F10
20nV/DIV
BIAS RESISTOR
VISHAY-TECHNO
CRHV2512AF1007G
(OR EQUIVALENT)
MAIN
GAIN-SETTING
ELEMENT IS A
CAPACITOR
SHOCK SENSOR
MURATA-ERIE
PKGS-00LD
770pF
CABLE HAS
UNKNOWN C
Rf
1G
6241 F11
VOUT = 110mV/g
–
+
LTC6240
Cf
7.7pF
BIAS RESISTOR
VISHAY-TECHNO
CRHV2512AF1007G
(OR EQUIVALENT)
1G
VS
+
6241 F12
10k
1k
100Ω
VOUT = 110mV/g
VS = ±1.4V to ±5.5V
BW = 0.2Hz to 10kHz
VOUT
–
+
1/2
LTC6241HV
VS
–
10k
100Ω
–
+
1/2
LTC6241HV
SHOCK SENSOR
MURATA-ERIE
PKGS-00LD
770pF
相关PDF资料 |
PDF描述 |
|---|---|
| LTC6244HVCDD#TRPBF | IC OP AMP DUAL R-R 8-DFN |
| LTC6247CTS8#TRPBF | IC OPAMP RRIO 180MHZ DL TSOT23-8 |
| LTC6253CTS8#TRPBF | IC OPAMP R-R 720MHZ TSOT23-8 |
| LTC6256IKC#TRMPBF | IC OP AMP RRIO DUAL 8UTDFN |
| LTC6410IUD-6#PBF | IC AMP DIFF IF 16-QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTC6242HGN | 制造商:Linear Technology 功能描述:OP Amp Quad GP R-R O/P 6V 16-Pin SSOP N |
| LTC6242HGN#PBF | 功能描述:IC OP AMP QUAD R-R 16-SSOP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:100 系列:- 放大器类型:通用 电路数:1 输出类型:- 转换速率:0.2 V/µs 增益带宽积:- -3db带宽:- 电流 - 输入偏压:100pA 电压 - 输入偏移:30µV 电流 - 电源:380µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):±2 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:管件 |
| LTC6242HGN#TRPBF | 功能描述:IC OP AMP QUAD R-R 16-SSOP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:100 系列:- 放大器类型:通用 电路数:1 输出类型:- 转换速率:0.2 V/µs 增益带宽积:- -3db带宽:- 电流 - 输入偏压:100pA 电压 - 输入偏移:30µV 电流 - 电源:380µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):±2 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:管件 |
| LTC6242HVCDHC | 制造商:Linear Technology 功能描述:OP Amp Quad GP R-R O/P ±5.5V/11V 16-Pin DFN EP |
| LTC6242HVCDHC#PBF | 功能描述:IC OP AMP QUAD R-R 16-DFN RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:50 系列:- 放大器类型:J-FET 电路数:2 输出类型:- 转换速率:3.5 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:30pA 电压 - 输入偏移:2000µV 电流 - 电源:200µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):7 V ~ 36 V，±3.5 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 供应商设备封装:8-PDIP 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。