- 您现在的位置：买卖IC网 > Datasheet目录868 > LTM4607IV#PBF (Linear Technology)IC BUCK/BOOST SYNC ADJ 5A 141LGA Datasheet资料下载
参数资料
| 型号： | LTM4607IV#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 13/26页 |
| 文件大小： | 0K |
| 描述： | IC BUCK/BOOST SYNC ADJ 5A 141LGA |
| 产品培训模块： | Buck-Boost uModule Regulators High Voltage µModule DC/DC Regulators Power Module vs. Discrete DC to DC |
| 软件下载： | LTM460(5,7) Spice Models LTM4607 Spice Model |
| 产品目录绘图： | LTM Series_15x15x2.8 |
| 设计资源： | LTM4607IV#PBF Footprint.bxl |
| 特色产品： | μModule Products DC/DC μModule Regulator Family |
| 标准包装： | 119 |
| 系列： | µModule® |
| 类型： | 非隔离（POL） |
| 输出数： | 1 |
| 电压 - 输入（最小）： | 4.5V |
| 电压 - 输入（最大）： | 36V |
| Voltage - Output 1： | 0.8 ~ 24 V |
| 电流 - 输出（最大）： | 5A |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 141-LGA |
| 尺寸/尺寸： | 0.59" L x 0.59" W x 0.11" H（15.0mm x 15.0mm x 2.8mm） |
| 包装： | 托盘 |
| 工作温度： | -40°C ~ 85°C |
| 效率： | 98% |
| 产品目录页面： | 2711 (CN2011-ZH PDF) |
| 配用： | DC1198A-B-ND - BOARD DEMO LTM4607 |
LTM4607
APPLICATIONS INFORMATION
pin for turning off the controller. If the pin is left open
or decoupled with a capacitor to ground, the SS pin is
internally provided with a starting current, permitting
external control for turning on the controller. If the pin
is connected to a voltage greater than 1.25V, the internal
regulator (INTV CC ) will be on even when the controller is
shut down (RUN pin voltage <1.6V). In this mode, the
onboard 6V output linear regulator can provide power to
keep-alive functions such as a keyboard controller.
INTV CC and EXTV CC
An internal P-channel low dropout regulator produces 6V
at the INTV CC pin from the V IN supply pin. INTV CC powers
the control chip and internal circuitry within the module.
The LTM4607 also provides the external supply voltage pin
EXTV CC . When the voltage applied to EXTV CC rises above
5.7V, the internal regulator is turned off and an internal
switch connects the EXTV CC pin to the INTV CC pin thereby
supplying internal power. The switch remains closed as long
as the voltage applied to EXTV CC remains above 5.5V. This
allows the MOSFET driver and control power to be derived
from the output when (5.7V < V OUT < 7V) and from the
internal regulator when the output is out of regulation (start-
up, short-circuit). If more current is required through the
EXTV CC switch than is specified, an external Schottky diode
can be interposed between the EXTV CC and INTV CC pins.
Ensure that EXTV CC ≤ V IN .
The following list summarizes the three possible connec-
tions for EXTV CC :
1. EXTV CC left open (or grounded). This will cause INTV CC
to be powered from the internal 6V regulator at the cost
of a small efficiency penalty.
2. EXTV CC connected directly to V OUT (5.7V < V OUT < 7V).
This is the normal connection for a 6V regulator and
provides the highest efficiency.
Thermal Considerations and Output Current Derating
In different applications, LTM4607 operates in a variety
of thermal environments. The maximum output current is
limited by the environmental thermal condition. Sufficient
cooling should be provided to ensure reliable operation.
When the cooling is limited, proper output current de-
rating is necessary, considering ambient temperature,
airflow, input/output condition, and the need for increased
reliability.
The power loss curves in Figures 5 and 6 can be used
in coordination with the load current derating curves in
Figures 7 to 14 for calculating an approximate θ JA for
the module. Column designation delineates between no
heat sink, and a BGA heat sink. Each of the load current
derating curves will lower the maximum load current as
a function of the increased ambient temperature to keep
the maximum junction temperature of the power module
at 115°C allowing a safe margin for the maximum operat-
ing temperature below 125°C. Each of the derating curves
and the power loss curve that corresponds to the correct
output voltage can be used to solve for the approximate
θ JA of the condition.
DESIGN EXAMPLES
Buck Mode Operation
As a design example, use input voltage V IN = 12V to 36V,
V OUT = 12V and ? = 400kHz.
Set the PLLFLTR pin at 2.4V or more for 400kHz frequency
and connect FCB to ground for continuous current mode
operation. If a divider is used to set the frequency as shown
in Figure 16, the bottom resistor R3 is recommended not
to exceed 1kΩ.
To set the output voltage at 12V, the resistor R FB from V FB
pin to ground should be chosen as:
3. EXTV CC connected to an external supply. If an external
supply is available in the 5.5V to 7V range, it may be
used to power EXTV CC provided it is compatible with
the MOSFET gate drive requirements.
R FB =
0.8V ? 100k
V OUT ? 0.8V
≈ 7.15k
13
For more information www.linear.com/LTM4607
4607fc
相关PDF资料 |
PDF描述 |
|---|---|
| LTM4608AEV#PBF | IC BUCK SYNC ADJ 8A 68LGA |
| LTM4608IV#PBF | IC DC/DC UMODULE 8A 68-LGA |
| LTM4609IV#PBF | IC BUCK/BOOST SYNC ADJ 4A 141LGA |
| LTM4612IV#PBF | IC BUCK SYNC ADJ 5A 133LGA |
| LTM4613MPV#PBF | IC UMODULE DC/DC 8A 133-LGA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LTM4607V | 制造商:LINER 制造商全称:Linear Technology 功能描述:36VIN, 24VOUT High Effi ciency Buck-Boost DC/DC μModule |
| LTM4608 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Low VIN, 8A DC/DC μModuleTM with Tracking, Margining, and Frequency Synchronization |
| LTM4608_1 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Low VIN, 8A DC/DC Module Regulator with Tracking, Margining, and Frequency Synchronization |
| LTM4608A | 制造商:LINER 制造商全称:Linear Technology 功能描述:Low VIN, 8A DC/DC μModule with Tracking, Margining, and Frequency Synchronization |
| LTM4608A_1 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Low VIN, 8A DC/DC Module Regulator with Tracking, Margining, and Frequency Synchronization |
发布紧急采购，3分钟左右您将得到回复。