参数资料
型号: LTM4607IV#PBF
厂商: Linear Technology
文件页数: 14/26页
文件大小: 0K
描述: IC BUCK/BOOST SYNC ADJ 5A 141LGA
产品培训模块: Buck-Boost uModule Regulators
High Voltage µModule DC/DC Regulators
Power Module vs. Discrete DC to DC
软件下载: LTM460(5,7) Spice Models
LTM4607 Spice Model
产品目录绘图: LTM Series_15x15x2.8
设计资源: LTM4607IV#PBF Footprint.bxl
特色产品: μModule Products
DC/DC μModule Regulator Family
标准包装: 119
系列: µModule®
类型: 非隔离(POL)
输出数: 1
电压 - 输入(最小): 4.5V
电压 - 输入(最大): 36V
Voltage - Output 1: 0.8 ~ 24 V
电流 - 输出(最大): 5A
安装类型: 表面贴装
封装/外壳: 141-LGA
尺寸/尺寸: 0.59" L x 0.59" W x 0.11" H(15.0mm x 15.0mm x 2.8mm)
包装: 托盘
工作温度: -40°C ~ 85°C
效率: 98%
产品目录页面: 2711 (CN2011-ZH PDF)
配用: DC1198A-B-ND - BOARD DEMO LTM4607
LTM4607
APPLICATIONS INFORMATION
Δ I L (V – V OUT ) ? V OUT2
R SENSE =
Tochooseaproperinductor,weneedtoknowthecurrent
ripples at different input voltages. The inductor should
be chosen by considering the worst case in the practi-
cal operating region. If the maximum output power P is
120W at buck mode, we can get the current ripple ratio
of the current ripple Δ I L to the maximum inductor current
I L as follows:
= IN
I L V IN ? L ? ? ? P
Figure 3. shows the current ripple ratio at different input
voltages based on the inductor values: 2.5μH, 3.3μH, 4.7μH
and 6μH. If we need about 40% ripple current ratio at all
inputs, the 4.7μH inductor can be selected.
At buck mode, sensing resistor selection is based on
the maximum output current and the allowed maximum
sensing threshold 130mV.
2 ? 130mV
2 ? (P / V OUT ) ? Δ I L
Consider the safety margin about 30%, we can choose
the sensing resistor as 9mΩ.
For the input capacitor, use a low ESR sized capacitor to
handle the maximum RMS current. Input capacitors are
required to be placed adjacent to the module. In Figure
16, the 10μF ceramic input capacitors are selected for
their ability to handle the large RMS current into the
converter. The 100μF bulk capacitor is only needed if the
input source impedance is compromised by long inductive
leads or traces.
For the output capacitor, the output voltage ripple and
transient requirements require low ESR capacitors. If
assuming that the ESR dominates the output ripple, the
output ripple is as follows:
Δ V OUT(P-P) = ESR ? Δ I L
If a total low ESR of about 5mΩ is chosen for output
capacitors, the maximum output ripple of 21.5mV occurs
at the input voltage of 36V with the current ripple at 4.3A.
Boost Mode Operation
For boost mode operation, use input voltage V IN = 5V to
12V, V OUT = 12V and ? = 400kHz.
Set the PLLFLTR pin and R FB as in buck mode.
Δ I L (V OUT ? V IN ) ? V IN 2 η
I L
V OUT ? L ? f ? P
0.8
0.6
0.4
V OUT = 12V
? = 400kHz
2.5μH
3.3μH
4.7μH
If the maximum output power P is 60W at boost mode
and the module efficiency η is about 95%, we can get
the current ripple ratio of the current ripple Δ I L to the
maximum inductor current I L as follows:
=
6μH
0.2
0
12
18
24 30
36
INPUT VOLTAGE V IN (V)
4607 F03
Figure 3. Current Ripple Ratio at Different Inputs for Buck Mode
14
For more information www.linear.com/LTM4607
4607fc
相关PDF资料
PDF描述
LTM4608AEV#PBF IC BUCK SYNC ADJ 8A 68LGA
LTM4608IV#PBF IC DC/DC UMODULE 8A 68-LGA
LTM4609IV#PBF IC BUCK/BOOST SYNC ADJ 4A 141LGA
LTM4612IV#PBF IC BUCK SYNC ADJ 5A 133LGA
LTM4613MPV#PBF IC UMODULE DC/DC 8A 133-LGA
相关代理商/技术参数
参数描述
LTM4607V 制造商:LINER 制造商全称:Linear Technology 功能描述:36VIN, 24VOUT High Effi ciency Buck-Boost DC/DC μModule
LTM4608 制造商:LINER 制造商全称:Linear Technology 功能描述:Low VIN, 8A DC/DC μModuleTM with Tracking, Margining, and Frequency Synchronization
LTM4608_1 制造商:LINER 制造商全称:Linear Technology 功能描述:Low VIN, 8A DC/DC Module Regulator with Tracking, Margining, and Frequency Synchronization
LTM4608A 制造商:LINER 制造商全称:Linear Technology 功能描述:Low VIN, 8A DC/DC μModule with Tracking, Margining, and Frequency Synchronization
LTM4608A_1 制造商:LINER 制造商全称:Linear Technology 功能描述:Low VIN, 8A DC/DC Module Regulator with Tracking, Margining, and Frequency Synchronization