- 您现在的位置：买卖IC网 > PDF目录30776 > LV51141T 2-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6 PDF资料下载
参数资料
| 型号： | LV51141T |
| 元件分类： | 电源管理 |
| 英文描述： | 2-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6 |
| 封装： | SOT-23, 6 PIN |
| 文件页数： | 13/13页 |
| 文件大小： | 155K |
| 代理商： | LV51141T |
LV51141T
No.A1025-9/13
Over-discharge detection
When the battery voltage (VDD) under the normal condition becomes equal to or less than the over-discharge detection
voltage (Vdc) and that state continues for more than the over-discharge detection time (tdc), this IC turns off the
discharge control FET and stops discharging. This state is called the over-discharge detection condition. Recovery from
the over-discharge detection condition is achieved only by connecting the charger.
Return from over-discharge
When the charger is connected and charging starts, the charge current flows through the internal parasitic diode of the
discharge control FET. If the VM terminal voltage is higher than the charge over-current detection voltage (VIc), the IC
returns to the normal condition when VDD becomes equal to or higher than VRdc and this state continues more than the
delay time1 (trel1).
If the VM terminal voltage is lower than the charge over-current detection voltage (VIc), same as the above-mentioned
case, the IC returns to the normal condition when VDD becomes equal to or higher than Vdc and this state continues
more than the delay time1 (trel1).
This IC stops all internal circuits (Shutdown condition) after detecting the over-discharge and reduces current
consumption. (Max 0.1
μA, at VDD = 1.8V)
0V battery charge function
If the voltage of charger (the voltage between VDD and VM) is larger than the 0V battery charge starting charger
voltage (Vcha), 0V battery charge becomes possible when CO terminal outputs VDD terminal potential and turns on the
charge control FET.
相关PDF资料 |
PDF描述 |
|---|---|
| LV549-CHIP | AUDIO AMPLIFIER, UUC8 |
| LV549-PLID | AUDIO AMPLIFIER, PDSO8 |
| LV549-MCRO | AUDIO AMPLIFIER, PDSO8 |
| LC549-MCRO | AUDIO AMPLIFIER, PDSO8 |
| LV5604T | SWITCHING CONTROLLER, 1300 kHz SWITCHING FREQ-MAX, PQFP64 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LV51141T-TE-F-E | 功能描述:电池管理 RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| LV51142T | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:CMOS IC 1-Cell Lithium-Ion Battery Protection IC |
| LV51142T-TE-F-E | 功能描述:电池管理 RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| LV51143T-TE-F-E | 制造商:Rochester Electronics LLC 功能描述: 制造商:ON Semiconductor 功能描述:Battery Management 制造商:ON Semiconductor 功能描述:REEL / 1-CELL LIB PROTECTION 制造商:Sony Semiconductor Solutions Division 功能描述: |
| LV51144T | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:CMOS IC 1-Cell Lithium-Ion Battery Protection IC |
发布紧急采购，3分钟左右您将得到回复。