- 您现在的位置：买卖IC网 > PDF目录98003 > LV8713T (SANYO SEMICONDUCTOR CO LTD) STEPPER MOTOR CONTROLLER, 1 A, PDSO24 PDF资料下载
参数资料
| 型号： | LV8713T |
| 厂商： | SANYO SEMICONDUCTOR CO LTD |
| 元件分类： | 运动控制电子 |
| 英文描述： | STEPPER MOTOR CONTROLLER, 1 A, PDSO24 |
| 封装： | 0.225 INCH, TSSOP-24 |
| 文件页数： | 15/16页 |
| 文件大小： | 304K |
| 代理商： | LV8713T |
LV8713T
No.A1918-8/16
Description of operation
Stepping motor control
(1) Power save function
This IC is switched between standby and operating mode by setting the PS pin. In standby mode, the IC is set to
power-save mode and all logic is reset. In addition, the internal regulator circuit do not operate in standby mode.
PS
Mode
Internal regulator
Low or Open
Standby mode
Standby
High
Operating mode
Operating
(2) The order of turning on recommended power supply
The order of turning on each power supply recommends the following.
VCC power supply order → VM power supply order → PS pin = High
It becomes the above-mentioned opposite for power supply OFF.
However, the above-mentioned is a recommendation, the overcurrent is not caused by not having defended this, and
IC is destroyed.
(3) STEP pin function
Input
PS
STP
Operating mode
Low
*
Standby mode
High
Excitation step proceeds
High
Excitation step is kept
(4) Excitation mode setting function(initial position)
Initial position
MD1
MD2
Excitation mode
Channel 1
Channel 2
Low
2 phase excitation
100%
-100%
High
Low
1-2 phase excitation
100%
0%
Low
High
4W1-2 phase excitation
100%
0%
High
8W1-2 phase excitation
100%
0%
This is the initial position of each excitation mode in the initial state after power-on and when the counter is reset.
(5) Position detection monitoring function
The MONI position detection monitoring pin is of an open drian type.
When the excitation position is in the initial position, the MONI output is placed in the ON state.
(Refer to "(12) Examples of current waveforms in each of the excitation modes.")
相关PDF资料 |
PDF描述 |
|---|---|
| LV8741V | STEPPER MOTOR CONTROLLER, 1.75 A, PDSO44 |
| LV8760T | BRUSH DC MOTOR CONTROLLER, 4 A, PDSO20 |
| LV8761V | BRUSH DC MOTOR CONTROLLER, 4 A, PDSO36 |
| LW006F-LP | 1-OUTPUT 6 W DC-DC REG PWR SUPPLY MODULE |
| LW006A-LP | 1-OUTPUT 6 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LV8713TGEVB | 功能描述:电源管理IC开发工具 EVM FOR LV8713T RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| LV8713T-MPB-H | 功能描述:马达/运动/点火控制器和驱动器 RoHS:否 制造商:STMicroelectronics 产品:Stepper Motor Controllers / Drivers 类型:2 Phase Stepper Motor Driver 工作电源电压:8 V to 45 V 电源电流:0.5 mA 工作温度:- 25 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:HTSSOP-28 封装:Tube |
| LV8713T-TLM-H | 功能描述:马达/运动/点火控制器和驱动器 4-16V Stepping Motor Driver RoHS:否 制造商:STMicroelectronics 产品:Stepper Motor Controllers / Drivers 类型:2 Phase Stepper Motor Driver 工作电源电压:8 V to 45 V 电源电流:0.5 mA 工作温度:- 25 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:HTSSOP-28 封装:Tube |
| LV8727 | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:PWM Current Control Stepping Motor Driver |
| LV8727-E | 功能描述:马达/运动/点火控制器和驱动器 PRINTER DRIVER RoHS:否 制造商:STMicroelectronics 产品:Stepper Motor Controllers / Drivers 类型:2 Phase Stepper Motor Driver 工作电源电压:8 V to 45 V 电源电流:0.5 mA 工作温度:- 25 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:HTSSOP-28 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。