- 您现在的位置：买卖IC网 > PDF目录20911 > LWN1740-6EM1 (Power-One)DIN RAIL 230W 51.36V BATT CHARGR PDF资料下载
参数资料
| 型号： | LWN1740-6EM1 |
| 厂商： | Power-One |
| 文件页数： | 11/25页 |
| 文件大小： | 0K |
| 描述： | DIN RAIL 230W 51.36V BATT CHARGR |
| 标准包装： | 1 |
| 系列： | * |
W Series Data Sheet
Parallel Operation
?
125, 250 Watt AC-DC and DC-DC DIN-Rail Converters
11054b
Double-output models exhibit an independant
control logic each. Both outputs can be
connected in parallel, provided that the
options S (included in M1) and R are not used,
since they influence only the 2 nd output. The
two power trains share the current due to their
output voltage droop characteristic.
Up to 3 converters with the same output
voltage may be operated in parallel. It is
possible to parallel W Series with X Series
V i
AUX 10
Vo- 9
Vo- 8
Vo+ 7
Vo+ 6
Vo- 5
Vo- 4
Vo+ 3
Vo+ 2
V R
converters.
Reasonable current sharing is achieved by
the droop characteristic. Correct mode of
operation is highly dependent upon the wiring
AUX 10
of the converters and the impedance of these
wires. Use wires with equal length and equal
cross sections of min. 1.5 mm 2 . The best
results for parallel operation can be achieved
with the wiring shown in fig. 6.
Parallel operation of single-output models
using the option R (output voltage adjust) is
possible, but not recommended. Refer to fig.
6; the connections between the pins 8 and 9
V i
Vo- 9
Vo- 8
Vo+ 7
Vo+ 6
Vo- 5
Vo- 4
Vo+ 3
Vo+ 2
+
Load
_
(both Vo –) should be as short as possible.
Note : Parallel operation is not possible, if a
temperature sensor is connected, as the
sensor eliminates the output voltage droop.
Note : For ORing diodes, we recommend to
use Schottkydiodes, mounted on a commun
AUX 10
Vo- 9
heatsink to avoid thermal run away (or the use
of double diodes).
Series Connection
V i
Vo- 8
Vo+ 7
Vo+ 6
Vo- 5
Series connection of several outputs up to 150
V is possible. Exceeding an output voltage of
60 V, the output is not SELV.
Vo- 4
Vo+ 3
Vo+ 2
Additional wiring for output currents I o ≥ 10 A
Additional wiring, if using the R-input
Output Characteristic and Protection
The output characteristic, individual for each
powertrain, is rectangular with a droop to ease
parallel operation; see fig. 7.
However, a 50% higher output current is
Fig. 6
Wiring for single-output converters connected in parallel. Additional wiring
for higher output currents and with the use of option R is shown.
possible for a short time, such allowing start-
up of loads or charging of capacitors; see fig.
8.
Each output is independently protected against internal
overvoltage by means of a second control loop. When the
output voltage exceeds V o L , the respective output is disabled.
Overtemperature Protection
A built-in temperature sensor protects each powertrain is
V o / V o nom
1.0
0.8
0.6
0.4
0.2
05181a
independently protected against overtemperature. When a
0
0
0.2
0.4
0.6
0.8
1.0
1.2
I o / I o nom
Fig. 7
V o versus I o (single-output model, typical values).
BCD20020-G Rev AC, 31-Jan-2013
Page 11 of 25
www.power-one.com
相关PDF资料 |
PDF描述 |
|---|---|
| NKA1215SC | CONV DC/DC 1W 12VIN 15V SIP DL |
| P51-1500-S-D-I36-20MA-000-000 | SENSOR 1500PSIS 7/16 UNF 4-20 MA |
| 5419 GOLD, 5/16 IN X 36 Y | TAPE LOW STATIC POLYIMIDE FILM |
| REC5-4812DRWZ/H2/C/M | CONV DC/DC 5W 18-72VIN +/-12VOUT |
| P51-75-A-T-MD-4.5OVP-000-000 | SENSOR 75PSI 7/16-20-2B .5-4.5V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LWN1740-6EM1G | 制造商:Power-One 功能描述:DIN RAIL FLOAT CHARGER 250W 48V |
| LWN1740-6EM1-G | 功能描述:DC/DC转换器 250W W-DIN-Rail Converters SNGL OUT RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| LWN1740-6M1 | 制造商:Power-One 功能描述:AC/DC PS SGL-OUT 51.36V 4.2A 250W 5PIN - Bulk |
| LWN-1801-6 | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:125 and 250 Watt AC-DC Converters |
| LWN1801-6 | 制造商:Power-One 功能描述:AC/DC Power Supply Single-OUT 49.4V 5A 247W 5-Pin 制造商:Power-One 功能描述:AC/DC PS SGL-OUT 49.36V 5A 250W 5PIN - Bulk |
发布紧急采购，3分钟左右您将得到回复。