- 您现在的位置：买卖IC网 > PDF目录20911 > LWN1740-6EM1 (Power-One)DIN RAIL 230W 51.36V BATT CHARGR PDF资料下载
参数资料
| 型号： | LWN1740-6EM1 |
| 厂商： | Power-One |
| 文件页数： | 12/25页 |
| 文件大小： | 0K |
| 描述： | DIN RAIL 230W 51.36V BATT CHARGR |
| 标准包装： | 1 |
| 系列： | * |
W Series Data Sheet
?
125, 250 Watt AC-DC and DC-DC DIN-Rail Converters
I o / I o nom
1.6
1.4
1.2
1.0
0.8
05194b
allows for connecting a battery-specific temperature sensor,
which provides temperature controlled adjust of the trickle
charge voltage. This optimizes charging as well as battery life
time. Depending upon the cell voltage and the temperature
coefficient of the battery, different sensor types are available;
see Accessories .
Note : Parallel operation is not possible, if the temperature sensor
is connected to the paralleled outputs Vo+, as the sensor
eliminates the output voltage droop.
0.6
- 0.5
0
0.5
1
1.5
2
2.5 s
However, it is possible to insert bleeding resistors in the Vo+
output lines of each converter in order to create a droop of approx.
Fig. 8
Short term peak power characteristic: overcurrent versus
time (typical values).
certain temperature is reached, the concerned powertrain
0.6 V @ I o nom for 24 V outputs (1.2 V @ I o nom for 48V outputs), but
this creates considerable power losses.
reduces its output power continuously.
Thermal Considerations
The thermal conditions are influenced by input voltage, output
Input
Power
supply
Vo+
Vo–
R
03099d
Load
current, airflow, and temperature of surrounding components.
T A max is therefore, contrary to T C max , an indicative value only.
Caution: The installer must ensure that under all operating
conditions T C remains within the limits stated in the table
Temperature specifications .
?
+
Note: Sufficient forced cooling allows T A to be higher than T A max
provided that T C max is not exceeded. It is recommended that
continuous operation under worst case conditions of the
following 3 parameters be avoided: Minimum input voltage,
maximum output power, and maximum temperature.
Battery Charging and Temperature Sensor
The battery charger models exhibit the option M1 and have
been designed to charge lead-acid batteries. The R-input
Temperature sensor Battery
Fig. 10
Schematic circuit diagram of a system with battery backup
and temperature-controlled charging.
Cell voltage [V]
2.45
2.40
2.35
2.30
2.25
2.20
2.15 V o safe
06139b
2.10
–20
–10
0
10
20
30
40
50 °C
V C = 2.27 V, –3 mV/K
V C = 2.23 V, –3 mV/K
V C = 2.27 V, –3.5 mV/K
V C = 2.23 V, –3.5 mV/K
Fig. 9
Trickle charge voltage versus temperature for different
temperature coefficients (V o safe with disconnected sensor)
BCD20020-G Rev AC, 31-Jan-2013
Page 12 of 25
www.power-one.com
相关PDF资料 |
PDF描述 |
|---|---|
| NKA1215SC | CONV DC/DC 1W 12VIN 15V SIP DL |
| P51-1500-S-D-I36-20MA-000-000 | SENSOR 1500PSIS 7/16 UNF 4-20 MA |
| 5419 GOLD, 5/16 IN X 36 Y | TAPE LOW STATIC POLYIMIDE FILM |
| REC5-4812DRWZ/H2/C/M | CONV DC/DC 5W 18-72VIN +/-12VOUT |
| P51-75-A-T-MD-4.5OVP-000-000 | SENSOR 75PSI 7/16-20-2B .5-4.5V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LWN1740-6EM1G | 制造商:Power-One 功能描述:DIN RAIL FLOAT CHARGER 250W 48V |
| LWN1740-6EM1-G | 功能描述:DC/DC转换器 250W W-DIN-Rail Converters SNGL OUT RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| LWN1740-6M1 | 制造商:Power-One 功能描述:AC/DC PS SGL-OUT 51.36V 4.2A 250W 5PIN - Bulk |
| LWN-1801-6 | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:125 and 250 Watt AC-DC Converters |
| LWN1801-6 | 制造商:Power-One 功能描述:AC/DC Power Supply Single-OUT 49.4V 5A 247W 5-Pin 制造商:Power-One 功能描述:AC/DC PS SGL-OUT 49.36V 5A 250W 5PIN - Bulk |
发布紧急采购，3分钟左右您将得到回复。