- 您现在的位置：买卖IC网 > Datasheet目录88 > M0240SD-402MDAR1-3 (Newhaven Display Intl)MODULE VF CHAR 2X40 5.34MM Datasheet资料下载
参数资料
| 型号： | M0240SD-402MDAR1-3 |
| 厂商： | Newhaven Display Intl |
| 文件页数： | 6/21页 |
| 文件大小： | 1592K |
| 描述： | MODULE VF CHAR 2X40 5.34MM |
| 标准包装： | 50 |
| 外形L x W x H： | 182.00mm x 33.50mm x 17.60mm |
| 可视范围： | 134.75mm L x 11.50mm W |
| 显示格式： | 40 x 2 |
| 显示器类型： | 字符 |
| 格式： | 5 x 8 点 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 字符尺寸： | 5.34mm H x 2.10mm W |
| 接口： | 并联 |
| 工作温度： | -20°C ~ 70°C |
DOCUMENT NO. REV.NO PAGE
STANDARD
NAME
00 13/20
80"KPUVTWEVKQPU
6.1 Outline
Only the instruction register (IR) and data register (DR) of the VFD controller can be controlled by the
user's MPU. Before starting the internal operation of the controller, control information is temporarily
stored into these registers to allow interfacing with various MPUs, which operate at different speeds, or
various peripheral control devices. The internal operation of the controller is determined by signals sent
from the MPU. These signals, which include register selection signal (RS), read/write signal (R/W), and
the data bus (DB0 to DB7), make up the controller instructions (See Table-13). There are four categories
of instructions that:
ェ
designate controller functions, such as display format, data length, ect.
ェ
Set internal RAM addresses
ェ
Perform data transfer with internal RAM
ェ
Perform miscellaneous functions
Normally instructions that perform data transfer with interval RAM are used the most.
However, auto-increment by 1 (or auto-decrement by 1) of internal RAM addresses after each data write
can lighten the program load of the MPU. Since the display shift instruction can perform concurrently
with display data write, the user can minimize system development time with maximum programming
efficiency0"
"
When an instruction is being executed for internal operation, no instruction other than the busy
flag/address read instruction can be executed. Because the busy flag is set to 1 while an instruction is
being executed, check it to make sure it is 0 before sending another instruction from the MPU.
"
Note<"Be sure the controller is not in the busy state (BF=0) before sending an instruction from the MPU to the
nodule. If an instruction is sent without checking the busy flag, the time between the first instruction
and next instruction will take much longer than the instruction time itself.
Refer to Table-13 for the list of each instruction execution time.
相关PDF资料 |
PDF描述 |
|---|---|
| M0420SD-204MDAR1-C | MODULE VF CHAR 4X20 4.87MM |
| M0420SD-204SDAR1-3 | MODULE VF CHAR 4X20 4.84MM |
| M1MA142WAT1G | DIODE SW DUAL SS CA 80V SOT-323 |
| M1MA142WKT1G | DIODE SW DUAL SS CC 80V SOT-323 |
| M1MA152WAT1 | DIODE SWITCH DUAL CA 80V SC59 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M024214-00A | 制造商:Teac 功能描述:ADPTR;SLIM;40PIN;IDE ADAP ROHS 制造商:Teac 功能描述:MISSING COMPUTER PARTS - Bulk |
| M024R7JT631 | 制造商:KOA Speer Electronics Inc 功能描述: |
| M025108TKSS | 制造商:n/a 功能描述:Ships in 2 days |
| M02510MPFSS | 制造商:n/a 功能描述:Ships in 2 days |
| M02510MPFZ | 制造商:n/a 功能描述:Ships in 2 days |
发布紧急采购，3分钟左右您将得到回复。