参数资料
型号: M30102M6T-XXXFP
元件分类: 微控制器/微处理器
英文描述: 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP48
封装: 7 X 7 MM, 0.50 MM PITCH, PLASTIC, LQFP-48
文件页数: 117/163页
文件大小: 2767K
代理商: M30102M6T-XXXFP
Under
development
Tentative Specifications REV.E1
Specifications in this manual are tentative and subject to change.
Mitsubishi microcomputers
M30100/M30102 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Watchdog Timer
57
Figure 1.13.1. Block diagram of watchdog timer
Watchdog Timer
The watchdog timer has the function of detecting when the program is out of control. Therefore, we recom-
mend using the watchdog timer to improve reliability of a system. The watchdog timer is a 15-bit counter
which down-counts the clock derived by dividing the BCLK using the prescaler. A watchdog timer interrupt
or reset is generated when an underflow occurs in the watchdog timer. A watchdog timer interrupt or reset
is selected by bit 2 of the processor mode register 1. When XIN is selected for the BCLK, bit 7 of the
watchdog timer control register (address 000F16) selects the prescaler division ratio (by 16 or by 128).
When XCIN is selected as the BCLK, the prescaler is set for division by 2 regardless of bit 7 of the watchdog
timer control register (address 000F16).
When XIN is selected in BCLK
Watchdog timer cycle =
When XCIN is selected in BCLK
Watchdog timer cycle =
For example, when BCLK is 10MHz and the prescaler division ratio is set to 16, the watchdog timer cycle is
approximately 52.4 ms.
The watchdog timer is initialized by writing to the watchdog timer start register (address 000E16) and when
a watchdog timer interrupt request is generated. The prescaler is initialized only when the microcomputer is
reset. After a reset is cancelled, the watchdog timer and prescaler are both stopped. The count is started by
writing to the watchdog timer start register (address 000E16).
Figure 1.13.1 shows the block diagram of the watchdog timer. Figure 1.13.2 shows the watchdog timer-
related registers.
Write to the watchdog timer
start register
(address 000E16)
RESET
"PM12=0"
Watchdog timer
interrupt request
Watchdog timer
Set to
“7FFF16
1/128
1/16
“CM07 = 0”
“WDC7 = 1”
“CM07 = 0”
“WDC7 = 0”
“CM07 = 1”
BCLK
1/2
Prescaler
"PM12=1"
Reset
Prescaler division ratio (16 or 128) x watchdog timer count (32768)
BCLK
Prescaler division ratio (2) x watchdog timer count (32768)
BCLK
相关PDF资料
PDF描述
M30623MGP-XXXGP 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP128
M30622MCA-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP100
M30810MC-XXXGP 32-BIT, MROM, 32 MHz, MICROCONTROLLER, PQFP100
M3062CMAT-XXXGP 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP100
M30260M4A-XXXGP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP48
相关代理商/技术参数
参数描述
M30102T-PTC 制造商:Renesas Electronics Corporation 功能描述:DEV 48PIN .5MM QFP CNVTR FOR M30100T-PRB - Bulk
M30-1050046 功能描述:集管和线壳 FML CRIMP CONTACT 1.25MM,AWG 26-30, RL RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector
M30-1060046 功能描述:集管和线壳 FML CRIMP CONTACT 1.25MM,AWG 26-30,LSE RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector
M3010A 制造商:Honeywell Sensing and Control 功能描述:GENERAL MARKET VRS
M3010A25 制造商:Honeywell Sensing and Control 功能描述:GENERAL MARKET VRS