参数资料
型号: M30102M6T-XXXFP
元件分类: 微控制器/微处理器
英文描述: 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP48
封装: 7 X 7 MM, 0.50 MM PITCH, PLASTIC, LQFP-48
文件页数: 59/163页
文件大小: 2767K
代理商: M30102M6T-XXXFP
Appendix Standard Serial I/O Mode (Flash Memory Version)
Under
development
Tentative Specifications REV.E1
Specifications in this manual are tentative and subject to change.
Mitsubishi microcomputers
M30100/M30102 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
151
Standard serial I/O mode
The standard serial I/O mode inputs and outputs the control functions, addresses and data needed to
operate (read, program, erase, etc.) the internal flash memory. This I/O is serial. There are actually two
standard serial I/O modes: mode 1, which is clock synchronized, and mode 2, which is asynchronized. Both
modes require a dedicated external device (writer).
In the standard serial I/O mode, the CPU controls rewrite to the flash memory and communication with the
dedicated external device (writer). This mode starts when the reset is released, which is done when the
CNVss pin is "H" level. (In the ordinary microprocessor mode, set CNVss pin to "L" level.)
This control program for communications with the dedicated external device (writer) is written in the boot
ROM area when the product is shipped from Mitsubishi. Accordingly, make note of the fact that the boot
ROM area cannot be erased nor rewritten. Figures 1.20.2 and 1.20.3 show the pin connections for the
standard serial I/O mode. The communications with the dedicated external device (writer) uses UART0.
Standard serial I/O switches between mode 1 (clock synchronized) and mode 2 (clock asynchronized)
according to the level of CLK0 pin when the reset is released.
To use standard serial I/O mode 1 (clock synchronized), set the CLK0 pin to "H" level and release the reset.
The operation uses the four UART0 pins CLK0, RxD0, TxD0 and BUSY.
To use standard serial I/O mode 2 (clock asynchronized), set the CLK0 pin to "L" level and release the
reset. The operation uses the two UART0 pins RxD0 and TxD0. The BUSY pin should be open.
相关PDF资料
PDF描述
M30623MGP-XXXGP 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP128
M30622MCA-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP100
M30810MC-XXXGP 32-BIT, MROM, 32 MHz, MICROCONTROLLER, PQFP100
M3062CMAT-XXXGP 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP100
M30260M4A-XXXGP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP48
相关代理商/技术参数
参数描述
M30102T-PTC 制造商:Renesas Electronics Corporation 功能描述:DEV 48PIN .5MM QFP CNVTR FOR M30100T-PRB - Bulk
M30-1050046 功能描述:集管和线壳 FML CRIMP CONTACT 1.25MM,AWG 26-30, RL RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector
M30-1060046 功能描述:集管和线壳 FML CRIMP CONTACT 1.25MM,AWG 26-30,LSE RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector
M3010A 制造商:Honeywell Sensing and Control 功能描述:GENERAL MARKET VRS
M3010A25 制造商:Honeywell Sensing and Control 功能描述:GENERAL MARKET VRS