- 您现在的位置：买卖IC网 > PDF目录67760 > M30201MX-XXXSP 16-BIT, MROM, MICROCONTROLLER, PDIP52 PDF资料下载
参数资料
| 型号： | M30201MX-XXXSP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 16-BIT, MROM, MICROCONTROLLER, PDIP52 |
| 封装： | 0.600 INCH, 1.78 MM PITCH, SHRINK, PLASTIC, DIP-52 |
| 文件页数： | 4/20页 |
| 文件大小： | 3876K |
| 代理商： | M30201MX-XXXSP |
Power Supply Connections
VD+ - Positive Digital Power, PIN 7.
Positive digital power supply. Nominally +5 volts.
VD- - Negative Digital Power, PIN 1.
Negative digital power supply. Nominally -5 volts.
DGND - Digital Ground, PIN 6.
Digital ground [reference].
VA+ - Positive Analog Power, PIN 25.
Positive analog power supply. Nominally +5 volts.
VA- - Negative Analog Power, PIN 23.
Negative analog power supply. Nominally -5 volts.
AGND - Analog Ground, PIN 22.
Analog ground reference.
Oscillator
CLKIN - Clock Input, PIN 3.
All conversions and calibrations are timed from a master clock which can be externally
supplied by driving CLKIN [this input TTL-compatible, CMOS recommended].
XOUT - Crystal Output, PIN 4.
The master clock can be generated by tying a crystal across the CLKIN and XOUT pins. If an
external clock is used, XOUT must be left floating.
Digital Inputs
HOLD - Hold, PIN 12.
A falling transition on this pin sets the CS5101A or CS5102A to the hold state and initiates a
conversion. This input must remain low for at least 1/tclk + 20 ns. When operating in Free Run
Mode, HOLD is disabled, and should be tied to DGND or VD+.
CRS/FIN - Coarse Charge/Fine Charge Control, PIN 10.
When brought high during acquisition time, CRS/FIN forces the CS5101A or CS5102A into
coarse charge state. This engages the internal buffer amplifier to track the analog input and
charges the capacitor array much faster, thereby allowing the CS5101A or CS5102A to track
high slewing signals. In order to get an accurate sample, the last coarse charge period before
initiating a conversion (bringing HOLD low) must be longer than 0.75
s (CS5101A) or
3.75
s (CS5102A). Similarly, the fine charge period immediately prior to conversion must be
at least 1.125
s (CS5101A) or 5.625 s (CS5102A). The CRS/FIN pin must be low during
conversion time. For normal operation, CRS/FIN should be tied low, in which case the
CS5101A or CS5102A will automatically enter coarse charge for 6 clock cycles immediately
after the end of conversion.
CS5101A CS5102A
32
DS45F2
相关PDF资料 |
PDF描述 |
|---|---|
| M30622ECV-XXXFP | 16-BIT, OTPROM, 16 MHz, MICROCONTROLLER, PQFP100 |
| M30623M4T-XXXGP | 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP80 |
| M30622ECTFP | 16-BIT, OTPROM, 16 MHz, MICROCONTROLLER, PQFP100 |
| M30622ECT-XXXFP | 16-BIT, OTPROM, 16 MHz, MICROCONTROLLER, PQFP100 |
| M30622MCV-XXXFP | 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP100 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M30201T-52SP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Converter for Connecting Pod Probe M30201T-PRB to 52-pin 1.778mm-pitch SDIP (for M30201 Group) |
| M30201T-56FP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Converter for Connecting Pod Probe M30201T-PRB to 56-pin 0.65mm-pitch QFP (for M30201 Group) |
| M30201T-PRB | 制造商:Renesas Electronics Corporation 功能描述:POD PROBE FOR M16C/20 GROUP - Bulk |
| M3021-000002-017BG | 功能描述:Pressure Sensor 246.56 PSI (1700 kPa) Vented Gauge Male - 1/4" (6.35mm) BSPP 0 mV ~ 100 mV (5V) Cylinder 制造商:te connectivity measurement specialties 系列:MSP300 零件状态:有效 压力类型:排气式压力计 工作压力:246.56 PSI（1700 kPa） 输出类型:模拟电压 输出:0 mV ~ 100 mV（5V） 精度:±1% 电压 - 电源:5V 端口尺寸:公型 - 1/4"（6.35mm） BSPP 端口样式:有螺纹 特性:温度补偿 端子类型:导线引线 最高压力:493.13 PSI（3400 kPa） 工作温度:-20°C ~ 85°C 封装/外壳:圆柱型 供应商器件封装:- 标准包装:1 |
| M3021-000002-035BG | 功能描述:Pressure Sensor 507.63 PSI (3500 kPa) Vented Gauge Male - 1/4" (6.35mm) BSPP 0 mV ~ 100 mV (5V) Cylinder 制造商:te connectivity measurement specialties 系列:MSP300 零件状态:有效 压力类型:排气式压力计 工作压力:507.63 PSI（3500 kPa） 输出类型:模拟电压 输出:0 mV ~ 100 mV（5V） 精度:±1% 电压 - 电源:5V 端口尺寸:公型 - 1/4"（6.35mm） BSPP 端口样式:有螺纹 特性:温度补偿 端子类型:导线引线 最高压力:1015.26 PSI（7000 kPa） 工作温度:-20°C ~ 85°C 封装/外壳:圆柱型 供应商器件封装:- 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。