参数资料
型号: M32170F4VWG
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 40 MHz, RISC MICROCONTROLLER, PBGA255
封装: 17 X 17 MM, FBGA-255
文件页数: 2/49页
文件大小: 561K
代理商: M32170F4VWG
Mitsubishi Microcomputers
10
2001-5-14 Rev.1.0
SINGLE-CHIP 32-BIT CMOS MICROCOMPUTER
32170 Group, 32174 Group
Table 5 Description of Pin Function (1/5 )
Type
Pin Name
Description
Input/Output
Function
Power
VCCE
Power supply
Supplies power (5 V or 3.3V) to external I/O ports.
supply
VCCI
Power supply
Supplies power (3.3 V) to the internal logic.
VDD
RAM power supply
nternal RAM backup power supply (3.3 V).
FVCC
Flash power supply —
Internal flash memory backup power supply (3.3 V).
VSS
Ground
Connect all VSS pins to ground (GND).
Clock
XIN,
Clock
Input
Clock input/output pins. These pins contain a PLL-based
XOUT
Output
frequency multiply-by-4, so input the clock whose frequency is quarter
the operating frequency. (XIN input = 10 MHz when CPU clock operates
at 40 MHz)
BCLK /
System clock
Output
When this signal is System Clock(BCLK), it outputs a clock whose is twice that of
______
WR
external inpout clock. (BCLK output = 20 MHz when CPU clock operates at 40
MHz). Use this clock when circuits are synchronized externally.
______
When this signal is Write(WR),during external write access it indicates the valid
data on the data bus to transfer.
OSC-VCC
Power supply
Power supply to the PLL circuit. Connect OSC-VCC to the power supply(3.3V)
OSC-VSS
Ground
Connect OSC-VSS to ground.
VCNT
PLL control
Input
This pin controls the PLL circuit. Connect a resistor and capacitor to this pin.
Reset
______
RESET
Reset
Input
This pin resets the internal circuits.
Mode
MOD0
Mode
Input
These pins set an operation mode.
MOD1
MOD0
MOD1
Mode
0
Single-chip mode
0
1
Expanded external mode
1
0
Processor mode
0
(Boot mode) (Note)
1
(Reserved)
Address
A11-A30
Address
Output
20 lines of address bus (A11-A30) are provided to accommodate two
bus
channels of 2 MB memory space (max.) connected external to the chip.
A31 is not output.
In the write cycle, of the 16-bit data bus the valid byte positions to write are
_________ ________
________ _______
output as BHW/ BHE and BLW/ BLE. In read cycle, data on the entire 16-bit
data bus is read. However, only the data at the valid byte positions are
transferred to the M32R’s internal circuit.
Data bus
DB0-DB15
Data bus
Input/output
This 16-bit data bus connects to external device.
Note: FP pin should be “H” level in Boot Mode.
相关PDF资料
PDF描述
MB90423GBPF 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP100
MB90427GCPF 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP100
MB90F423GCPF 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP100
M30280MC-XXXHP-U3 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP80
MC3S12Q32CFA8 16-BIT, FLASH, 8 MHz, MICROCONTROLLER, PQFP48
相关代理商/技术参数
参数描述
M32170F6VFP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 32-BIT CMOS MICROCOMPUTER
M32170F6VWG 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 32-BIT CMOS MICROCOMPUTER
M32170T-PTC 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Converter for In-circuit Connection (for 32170, 32174 Group)
M32171F2VFP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 32-BIT CMOS MICROCOMPUTER
M32171F3VFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:32-BIT RISC SINGLE-CHIP MICROCOMPUTER M32R FAMILY / M32R/ECU SERIES