- 您现在的位置：买卖IC网 > PDF目录69011 > M34551M4-XXXFP 4-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP48 PDF资料下载
参数资料
| 型号： | M34551M4-XXXFP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 4-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP48 |
| 封装： | 7 X 10 MM, 0.65 MM PITCH, PLASTIC, QFP-48 |
| 文件页数： | 13/71页 |
| 文件大小： | 966K |
| 代理商： | M34551M4-XXXFP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页当前第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页
17
MITSUBISHI MICROCOMPUTERS
4551 Group
SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER for
INFRARED REMOTE CONTROL TRANSMITTER
(1) External 0 interrupt request flag (EXF0)
External 0 interrupt request flag (EXF0) is set to “1” when a
valid waveform is input to D5/INT pin.
The valid waveforms causing the interrupt must be retained
at their level for 4 cycles or more of the system clock (Refer
to Figure 16).
The state of EXF0 flag can be examined with the skip
instruction (SNZ0). Use the interrupt control register V1 to
select the interrupt or the skip instruction. The EXF0 flag is
cleared to “0” when an interrupt occurs or when the next
instruction is skipped with the skip instruction.
The D5/INT pin need not be selected the external interrupt
input INT function or the normal output port D5 function.
However, the EXF0 flag is set to “1” when a valid waveform
output from port D5 is input to INT pin even if it is used as an
output port D5.
q External 0 interrupt activated condition
External 0 interrupt activated condition is satisfied when a
valid waveform is input to D5/INT pin.
The valid waveform can be selected from rising waveform or
falling waveform. An example of how to use the external 0
interrupt is as follows.
Select the valid waveform with the bit 2 of register I1.
Clear the EXF0 flag to “0” with the SNZ0 instruction.
Set the NOP instruction for the case when a skip is performed
with the SNZ0 instruction.
Set both the external 0 interrupt enable bit (V10) and the
INTE flag to “1.”
The external 0 interrupt is now enabled. Now when a valid
waveform is input to the D5/INT pin, the EXF0 flag is set to
“1” and the external 0 interrupt occurs.
(2) External interrupt control register
q Interrupt control register I1
Register I1 controls the valid waveform for the external 0
interrupt. Set the contents of this register through register A
with the TI1A instruction. The TAI1 instruction can be used
to transfer the contents of register I1 to register A.
Table 8 External interrupt control register
Notes 1: “R” represents read enabled, and “W” represents write enabled.
2: Depending on the input state of D5/INT pin, the external interrupt request flag EXF0 may be set to “1” when the contents of
I12 is changed. Accordingly, set a value to bit 2 of register I1 and execute the SNZ0 instruction to clear the EXF0 flag after
executing at least one instruction.
I13
I12
I11
I10
Not used
Interrupt valid waveform for INT pin
selection bit (Note 2)
Not used
0
1
0
1
0
1
0
1
This bit has no function, but read/write is enabled.
Falling waveform (“L” level of INT pin is recognized with the SNZI0
instruction)
Rising waveform (“H” level of INT pin is recognized with the SNZI0
instruction)
This bit has no function, but read/write is enabled.
Interrupt control register I1
R/W
at reset : 00002
at power down : state retained
相关PDF资料 |
PDF描述 |
|---|---|
| M34552G8FP | 4-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PQFP48 |
| M34552M8H-XXXFP | 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP48 |
| M34552G8HFP | 4-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PQFP48 |
| M34556G8HFP | 4-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PDSO42 |
| M34556M8-XXXFP | 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M34551M8 | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:4-BIT SINGLE-CHIP MICROCOMPUTER |
| M34552G8FP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
| M34552G8HFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
| M34552M4H-XXXFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
| M34552M4-XXXFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
发布紧急采购，3分钟左右您将得到回复。