- 您现在的位置：买卖IC网 > PDF目录45032 > M37477E8TXXXFP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDSO32 PDF资料下载
参数资料
| 型号： | M37477E8TXXXFP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDSO32 |
| 封装： | PLASTIC, SOP-32 |
| 文件页数： | 20/48页 |
| 文件大小： | 720K |
| 代理商： | M37477E8TXXXFP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页当前第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页
26
MITSUBISHI MICROCOMPUTERS
7477/ 7478 GROUP
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
I/O PORTS
(1) Port P0
Por t P0 is an 8-bit I/O port with CMOS outputs. As shown in
Figure 2, P0 can be accessed as memory through zero page
address 00C016. Port P0’s direction register allows each bit to
be programmed individually as input or output. The direction
register (zero page address 00C116) can be programmed as
input with “0”, or as output with “1”. When in the output mode,
the data to be output is latched to the port latch and output.
When data is read from the output port, the output pin level is
not read, only the latched data of the port latch is read.
Therefore, a previously output value can be read correctly
even though the output voltage level has been shifted up or
down. Port pins set as input are in the high impedance state
so the signal level can be read. When data is written into the
input port, the data is latched only to the output latch and the
pin still remains in the high impedance state. Following the
execution of STP or WIT instruction, key matrix with port P0
can be used to generate the interrupt to bring the microcom-
puter back in its normal state. When this port is selected for
input, pull-up transistor can be connected in units of 1-bit.
(2) Port P1
Port P1 has the same function as port P0. P12 – P17 serve
dual functions, and the desired function can be selected by
the program. When this port is selected for input, pull-up tran-
sistor can be connected in units of 4-bit.
(3) Port P2
Port P2 is an 8-bit input port. In the 7477 group, this port is
P20 – P23, a 4-bit input port. This port can also be used as
the analog voltage input pins.
(4) Port P3
Port P3 is a 4-bit input port.
(5) Port P4
Port P4 is a 4-bit I/O port and has basically the same func-
tions as port P0. In the 7477 group, this port is P40 and P41,
a 2-bit I/O port. When this port is selected for input, pull-up
transistor can be connected in units of 4-bit .
(6) Port P5
Port P5 is a 4-bit input port and pull-up transistor can be con-
nected in units of 4-bit. P50 and P51 are shared with clock
generating circuit input/output pins.
The 7477 group does not have this port.
(7) INT0 pin (P30/INT0 pin)
This is an interrupt input pin, and is shared with port P30.
When “H” to “L” or “L” to “H” transition input is applied to this
pin, the INT0 interrupt request bit (bit 0 of address 00FD16) is
set to “1”.
(8) INT1 pin (P31/INT1 pin)
This is an interrupt input pin, and is shared with port P31.
When “H” to “L” or “L” to “H” transition input is applied to this
pin, the INT1 interrupt request bit (bit 1 of address 00FD16) is
set to “1”.
(9) Counter input CNTR0 pin (P32/CNTR0 pin)
This is a timer input pin, and is shared with port P32.
When this pin is selected to CNTR0 or CNTR1 interrupt input
pin and “H” to “L” or “L” to “H” transition input is applied to this
pin, the CNTR0 or CNTR1 interrupt request bit (bit 2 of ad-
dress 00FD16) is set to “1”.
(10) Counter input CNTR1 pin (P33/CNTR1 pin)
This is a timer input pin, and is shared with port P33.
When this pin is selected to CNTR0 or CNTR1 interrupt input
pin and “H” to “L” or “L” to “H” transition input is applied to this
pin, the CNTR0 or CNTR1 interrupt request bit (bit 2 of ad-
dress 00FD16) is set to “1”.
相关PDF资料 |
PDF描述 |
|---|---|
| M37477E8FP | 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDSO32 |
| M37478E8FP | 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP56 |
| M37478E8TXXXFP | 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP56 |
| M37478M4TXXXSP | 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42 |
| M37477M4TXXXSP | 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP32 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M37477E8TXXXSP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 7470 SERIES |
| M37477E8TXXXSP/FP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER |
| M37477E8-XXXFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 7470 SERIES |
| M37477E8-XXXSP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 7470 SERIES |
| M37477E8-XXXSP/FP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER |
发布紧急采购，3分钟左右您将得到回复。