参数资料
型号: M37702S1AFP
元件分类: 微控制器/微处理器
英文描述: 16-BIT, 16 MHz, MICROCONTROLLER, PQFP80
封装: QFP-80
文件页数: 7/61页
文件大小: 760K
代理商: M37702S1AFP
12
MITSUBISHI MICROCOMPUTERS
M37702M2AXXXFP, M37702M2BXXXFP
M37702S1AFP, M37702S1BFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
INTERRUPTS
Table 1 shows the interrupt types and the corresponding interrupt
vector addresses. Reset is also treated as a type of interrupt and
____
is discussed in this section, too. DBC is an interrupt used during
debugging.
____
Interrupts other than reset, DBC, watchdog timer, zero divide, and
BRK instruction all have interrupt control registers. Table 2 shows
the addresses of the interrupt control registers and Figure 6 shows
the bit configuration of the interrupt control register.
Use the SEB and CLB instructions when setting each interrupt
control register.
The interrupt request bit is automatically cleared by the hardware
during reset or when processing an interrupt.
____
Also, interrupt request bits other than DBC and watchdog timer
can be cleared by software.
____
INT2 to INT0 are external interrupts and whether to cause an inter-
rupt at the input level (level sense) or at the edge (edge sense)
can be selected with the level sense/edge sense selection bit. Fur-
thermore, the polarity of the interrupt input can be selected with
polarity selection bit.
Timer and UART interrupts are described in the respective sec-
tion. The priority of interrupts when multiple interrupts are caused
simultaneously is partially fixed by hardware, but, it can also be
adjusted by software as shown in Figure 7. The hardware priority
is fixed the following:
____
reset > DBC > watchdog timer > other interrupts
Interrupts
A-D conversion
UART1 transmit
UART1 receive
UART0 transmit
UART0 receive
Timer B2
Timer B1
Timer B0
Timer A4
Timer A3
Timer A2
Timer A1
Timer A0
____
INT2 external interrupt
____
INT1 external interrupt
____
INT0 external interrupt
Watchdog timer
____
DBC (unusable)
Break instruction
Zero divide
Reset
Vector addresses
00FFD616
00FFD716
00FFD816
00FFD916
00FFDA16
00FFDB16
00FFDC16
00FFDD16
00FFDE16
00FFDF16
00FFE016
00FFE116
00FFE216
00FFE316
00FFE416
00FFE516
00FFE616
00FFE716
00FFE816
00FFE916
00FFEA16
00FFEB16
00FFEC16
00FFED16
00FFEE16
00FFEF16
00FFF016
00FFF116
00FFF216
00FFF316
00FFF416
00FFF516
00FFF616
00FFF716
00FFF816
00FFF916
00FFFA16
00FFFB16
00FFFC16
00FFFD16
00FFFE16
00FFFF16
Table 1. Interrupt types and the interrupt vector addresses
Fig. 6 Interrupt control register configuration
7
Interrupt priority
654 3 2 1 0
Interrupt request bit
0 : No interrupt
1 : Interrupt
Interrupt control register configuration for A-D converter, UART0, UART1, timer A0 to timer A4, and
timer B0 to timer B2
7
Interrupt priority
654 3 2 1 0
Interrupt request bit
0 : No interrupt
1 : Interrupt
Polarity selection bit
0 : Set interrupt request bit at “H” level for level sense and when changing
from “H” to “L” level for edge sense.
1 : Set interrupt request bit at “L” level for level sense and when changing
from “L” to “H” level for edge sense.
Level sense/edge sense selection bit
0 : Edge sense
1 : Level sense
Interrupt control register configuration for INT2 to INT0.
相关PDF资料
PDF描述
M37702M2AXXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP80
M37702S1BFP 16-BIT, 25 MHz, MICROCONTROLLER, PQFP80
M37702S1LGP 16-BIT, 8 MHz, MICROCONTROLLER, PQFP80
M37702S1LHP 16-BIT, 8 MHz, MICROCONTROLLER, PQFP80
M37702M2LXXXHP 16-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP80
相关代理商/技术参数
参数描述
M37702S1BFP 制造商:Renesas Electronics Corporation 功能描述:
M37702S1LGP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37702S1LHP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37702S4AFP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37702S4BFP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER