参数资料
型号: M37733S4BFP
元件分类: 微控制器/微处理器
英文描述: 16-BIT, 25 MHz, MICROCONTROLLER, PQFP80
封装: 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80
文件页数: 7/39页
文件大小: 826K
代理商: M37733S4BFP
12
MITSUBISHI MICROCOMPUTERS
M37733S4BFP
16-BIT CMOS MICROCOMPUTER
New
product
Fig. 11 Relationship between wait bit, wait selection bit, and access time
Wait bit
As shown in Figure 11, when the external memory area is accessed
with the processor mode register 0 (address 5E16) bit 2 (wait bit)
cleared to “0”, the access time can be extended compared with no
wait (the wait bit is “1”).
The access time is extended in two ways and this is selected with bit
0 (wait selection bit) of processor mode register 1 (address 5F16).
When this bit is “1”, the access time is 1.5 times compared to that for
no wait. When this bit is “0”, the access time is twice compared to
that for no wait.
At reset, the wait bit and the wait selection bit are “0”.
The accessing of internal memory area is performed in no wait mode
regardless of the wait bit.
The processor modes are described below.
Fig. 10 External memory area for each processor mode
(1) Microprocessor mode [10]
Microprocessor mode is entered by connecting the CNVss pin to Vcc
and starting from reset.
__
Signal E is output from pin E and is “L” during the data/instruction
code read or data write term. When the internal memory area is read
_
or written, E can be fixed to “H” by setting the signal output disable
selection bit (bit 6 of oscillation circuit control register 0) to “1”.
P00/A0 to P07/A7 pins become address output pins.
P10/A8/D8 to P17/A15/D15 pins have two functions depending on the
level of the BYTE pin.
When the BYTE pin level is “L”, P10/A8/D8 to P17/A15/D15 pins function
_
as an address output pin while E is “H” and as an odd address data
_
I/O pin while E is “L”. However, if an internal memory is read, external
_
data is ignored while E is “L”.
When the BYTE pin level is “H”, P10/A8/D8 to P17/A15/D15 pins function
as an address output pin.
When the BYTE pin level is “L”, P20/A16/D0 to P27/A23/D7 pins function
_
as an address output pin while E is “H” and as an even address data
_
I/O pin while E is “L”. However, if an internal memory is read, external
_
data is ignored while E is “L”.
_
R/W is a read /write signal which indicates a read when it is “H” and a
write when it is “L”.
___
BHE
is a byte high enable signal which indicates that an odd address
is accessed when it is “L”.
Therefore, two bytes at even and odd addresses are accessed
___
simultaneously if address A0 is “L” and BHE is “L”.
ALE is an address latch enable signal used to latch the address signal
from a multiplexed signal of address and data. The latch is transparent
while ALE is “H” to let the address signal pass through and held
while ALE is “L”.
8016
87F16
SFR
RAM
Evaluation chip
mode
The shaded area is the external memory area.
SFR
0016
FFFFFF16
RAM
Microprocessor
mode
FFFFFF16
216
A16
C16
Wait bit “1”
(No wait)
Internal clock
Ai/Dj
E
ALE
Ai/Dj
Wait bit “0”
(Wait 1)
E
ALE
Access time
Address
Data Address Data
Address
Data
Address
Data
Ai/Dj
Wait bit “0”
(Wait 0)
E
ALE
Access time
Address
Data
Address
相关PDF资料
PDF描述
M37735MHLXXXHP 16-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
M37753M6C-XXXHP 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP80
M37754FFCGP 16-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP100
M37905F8CFP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
M37905F8CSP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDIP64
相关代理商/技术参数
参数描述
M37733S4LHP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
M37733TL-HPD 制造商:Renesas Electronics Corporation 功能描述:DEV 7733 GROUP EMULATION POD - Bulk
M37735EHB 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:PROM VERSION OF M37735EHBXXXFP
M37735EHBFS 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:PROM VERSION OF M37735MHBXXXFP
M37735EHBXXXFP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:PROM VERSION OF M37735EHBXXXFP