参数资料
型号: M38002SFP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, 8 MHz, MICROCONTROLLER, PQFP64
封装: 14 X 14 MM, 0.80 MM PITCH, PLASTIC, QFP-64
文件页数: 93/174页
文件大小: 1752K
代理商: M38002SFP
1-10
HARDWARE
3800 GROUP USER’S MANUAL
FUNCTIONAL DESCRIPTION
Central Processing Unit (CPU)
The 3800 group uses the standard 740 family instruction set. Re-
fer to the table of 740 family addressing modes and machine in-
structions or the SERIES 740 <Software> User’s Manual for de-
tails on the instruction set.
Machine-resident 740 family instructions are as follows:
The FST and SLW instruction cannot be used.
The STP, WIT, MUL, and DIV instruction can be used.
The central processing unit (CPU) has the six registers.
Accumulator (A)
The accumulator is an 8-bit register. Data operations such as data
transfer, etc., are executed mainly through the accumulator.
Index register X (X), Index register Y (Y)
Both index register X and index register Y are 8-bit registers. In
the index addressing modes, the value of the OPERAND is added
to the contents of register X or register Y and specifies the real ad-
dress.
When the T flag in the processor status register is set to “1”, the
value contained in index register X becomes the address for the
second OPERAND.
Stack pointer (S)
The stack pointer is an 8-bit register used during subroutine calls
and interrupts. The stack is used to store the current address data
and processor status when branching to subroutines or interrupt
routines.
The lower eight bits of the stack address are determined by the
contents of the stack pointer. The upper eight bits of the stack ad-
dress are determined by the Stack Page Selection Bit. If the Stack
Page Selection Bit is “0”, then the RAM in the zero page is used
as the stack area. If the Stack Page Selection Bit is “1”, then RAM
in page 1 is used as the stack area.
The Stack Page Selection Bit is located in the SFR area in the
zero page. Note that the initial value of the Stack Page Selection
Bit varies with each microcomputer type. Also some microcom-
puter types have no Stack Page Selection Bit and the upper eight
bits of the stack address are fixed.
The operations of pushing register contents onto the stack and
popping them from the stack are shown in Fig. 8.
Program counter (PC)
The program counter is a 16-bit counter consisting of two 8-bit
registers PCH and PCL. It is used to indicate the address of the
next instruction to be executed.
Fig. 7 740 Family CPU register structure
FUNCTIONAL DESCRIPTION
X
Y
S
PCL
C
NV T B D I Z
A
b0
b7
b15
b0
b7
b0
b7
b0
b7
b0
b7
Accumulator
Index Register X
Index Register Y
Stack Pointer
Program Counter
Processor Status Register (PS)
Carry Flag
Zero Flag
Interrupt Disable Flag
Decimal Mode Flag
Break Flag
Index X Mode Flag
Overflow Flag
Negative Flag
PCH
相关PDF资料
PDF描述
MSC1212Y2PAGT 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64
M38067MC-XXXGP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP80
M38027E8SS 8-BIT, UVPROM, 8 MHz, MICROCONTROLLER, CDIP64
M30622M8P-XXXFP 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP100
M37478M4TXXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP56
相关代理商/技术参数
参数描述
M38002SSP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER
M38003E1-DXXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 38000 SERIES
M38003E1-DXXXSP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 38000 SERIES
M38003E1-XXXFP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER
M38003E1-XXXFS 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER