参数资料
型号: M38239GC-XXXFP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP80
封装: 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80
文件页数: 17/76页
文件大小: 896K
代理商: M38239GC-XXXFP
Rev.2.02
Jun 19, 2007
page 24 of 73
REJ03B0146-0202
3823 Group
Fig. 16 Interrupt control diagram
Interrupt request bit
Interrupt enable bit
Interrupt disable flag (I)
BRK instruction
Reset
interrupt request
Interrupt Disable Flag
The interrupt disable flag is assigned to bit 2 of the processor sta-
tus register. This flag controls the acceptance of all interrupt
requests except for the BRK instruction. When this flag is set to
“1”, the acceptance of interrupt requests is disabled. When it is set
to “0”, acceptance of interrupt requests is enabled. This flag is set
to “1” with the SET instruction and set to “0” with the CLI instruc-
tion.
When an interrupt request is accepted, the contents of the proces-
sor status register are pushed onto the stack while the interrupt
disable flag remaines set to “0”. Subsequently, this flag is auto-
matically set to “1” and multiple interrupts are disabled.
To use multiple interrupts, set this flag to “0” with the CLI instruc-
tion within the interrupt processing routine.
The contents of the processor status register are popped off the
stack with the RTI instruction.
Interrupt Request Bits
Once an interrupt request is generated, the corresponding inter-
rupt request bit is set to “1” and remaines “1” until the request is
accepted. When the request is accepted, this bit is automatically
set to “0”.
Each interrupt request bit can be set to “0”, but cannot be set to
“1”, by software.
Interrupt Enable Bits
The interrupt enable bits control the acceptance of the corre-
sponding interrupt requests. When an interrupt enable bit is set to
“0”, the acceptance of the corresponding interrupt request is dis-
abled. If an interrupt request occurs in this condition, the
corresponding interrupt request bit is set to “1”, but the interrupt
request is not accepted. When an interrupt enable bit is set to “1”,
acceptance of the corresponding interrupt request is enabled.
Each interrupt enable bit can be set to “0” or “1” by software.
The interrupt enable bit for an unused interrupt should be set to
“0”.
Interrupt Source Selection
The following combinations can be selected by the interrupt
source selection bit of the AD control register (bit 6 of the address
003916).
ADT or A/D conversion (refer Table 9)
相关PDF资料
PDF描述
MPC8280CZQPKBX 32-BIT, 300 MHz, RISC PROCESSOR, PBGA516
M306N4FCFP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
MC6805P4L 8-BIT, MROM, 1 MHz, MICROCONTROLLER, CDIP28
MC6805R3CL 8-BIT, MROM, MICROCONTROLLER, CDIP40
MC68HC908EY8AKFA 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PQFP32
相关代理商/技术参数
参数描述
M3823AGFFP#U0 功能描述:MCU 2/5V 60K 80-QFP QZ-ROM RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 标准包装:250 系列:80C 核心处理器:8051 芯体尺寸:8-位 速度:16MHz 连通性:EBI/EMI,I²C,UART/USART 外围设备:POR,PWM,WDT 输入/输出数:40 程序存储器容量:- 程序存储器类型:ROMless EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-LCC(J 形引线) 包装:带卷 (TR)
M3823AGFHP#U0 功能描述:MCU 2/5V 60K 80-LQFP QZ-ROM RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 标准包装:250 系列:80C 核心处理器:8051 芯体尺寸:8-位 速度:16MHz 连通性:EBI/EMI,I²C,UART/USART 外围设备:POR,PWM,WDT 输入/输出数:40 程序存储器容量:- 程序存储器类型:ROMless EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-LCC(J 形引线) 包装:带卷 (TR)
M3823AT-RLFS 功能描述:DEV EMULATOR PERSONALITY KIT M38 RoHS:否 类别:编程器,开发系统 >> 配件 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 标准包装:1 系列:- 附件类型:USB 至 1-Wire? RJ11 适配器 适用于相关产品:1-Wire? 设备 产品目录页面:1429 (CN2011-ZH PDF)
M3823-BLACK-1000 制造商:Alpha Wire 功能描述:
M3824 功能描述:电缆固定件和配件 LTSCG 1000 BLACK RoHS:否 制造商:Heyco 类型:Cable Grips, Liquid Tight 材料:Nylon 颜色:Black 安装方法:Cable 最大光束直径:11.4 mm 抗拉强度: