收藏本站
参数资料
型号： M38D58G8-XXXHP
元件分类： 微控制器/微处理器
英文描述： 8-BIT, MROM, 6.25 MHz, MICROCONTROLLER, PQFP80
封装： 12 X 12 MM, 0.50 MM PITCH, PLASTIC, LQFP-80
文件页数： 30/142页
文件大小： 2004K
代理商： M38D58G8-XXXHP
Rev.3.04
May 20, 2008
Page 125 of 134
REJ03B0158-0304
38D5 Group
Notes on Interrupts
1. Changing Related Register Settings
If the interrupt occurrence synchronized with the following
settings is not required, take the sequence shown below.
When selecting the external interrupt active edge
When selecting the interrupt source of the interrupt vector
address where two or more interrupt sources are allocated
Fig. 102 Sequence for setting related register
<Reason>
In the following cases, the interrupt request bit of the
corresponding interrupt may be set to “1”.
<When switching the external interrupt active edge>
INT0 interrupt edge selection bit
(bit 0 of interrupt edge selection register (address 003A16))
INT1 interrupt edge selection bit
(bit 1 of interrupt edge selection register)
INT2 interrupt edge selection bit
(bit 2 of interrupt edge selection register)
CNTR0 active edge switch bits
(bits 6 and 7 of timer X control register 1 (address 002E16))
CNTR1 active edge switch bit
(bits 6 of timer Y mode register (address 003816))
<When switching the interrupt source of the interrupt vector
address where two or more interrupt sources are allocated>
Timer Y/CNTR1 interrupt switch bit
(bit 3 of interrupt edge selection register)
<When switching the INT pin>
INT0 input port switch bit
(bit 4 of interrupt edge selection register)
INT1 input port switch bit
(bit 5 of interrupt edge select register)
2. Checking Interrupt Request Bit
To check the interrupt request bit with the BBC or BBS
instruction immediately after this bit is set to “0”, take the
following sequence.
<Reason>
If the BBC or BBS instruction is executed immediately after the
interrupt request bit is set to “0”, the bit value before being set to
“0” is read.
Fig. 103 Sequence for setting interrupt request bit
3. Setting Unused Interrupts
Set the interrupt enable bit of the unused interrupt to “0”
(disabled).
Set the interrupt edge selection bit (active edge
switch bit) or interrupt (source) selection bit.
NOP (one or more instructions)
Set the corresponding interrupt enable bit to
“0” (disabled).
Set the corresponding interrupt request bit to “0”
(no interrupt request).
Set the corresponding interrupt enable bit to “1”
(enabled).
NOP (one or more instructions)
Set the interrupt request bit to “0” (no interrupt)
Execute the BBC or BBS instruction
相关PDF资料
PDF描述
MC6805R3S 8-BIT, MROM, MICROCONTROLLER, CDIP40
MC68HC705P6MDW 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PDSO28
MC908QB4CDT 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDSO16
MC908QL2CDTE 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDSO16
MC908QT1AMPE 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDIP8
相关代理商/技术参数
参数描述
M38D59GCFP#U0 功能描述:IC 740/38D5 MCU QZ-ROM 80QFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:740/38000 标准包装:250 系列:80C 核心处理器:8051 芯体尺寸:8-位 速度:16MHz 连通性:EBI/EMI，I²C，UART/USART 外围设备:POR，PWM，WDT 输入/输出数:40 程序存储器容量:- 程序存储器类型:ROMless EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-LCC（J 形引线） 包装:带卷 (TR)
M38D59GCHP#U0 功能描述:IC 740/38D5 MCU QZ-ROM 80LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:740/38000 标准包装:250 系列:80C 核心处理器:8051 芯体尺寸:8-位 速度:16MHz 连通性:EBI/EMI，I²C，UART/USART 外围设备:POR，PWM，WDT 输入/输出数:40 程序存储器容量:- 程序存储器类型:ROMless EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-LCC（J 形引线） 包装:带卷 (TR)
M38D59GFFP#U0 功能描述:IC 740/38D5 MCU QZ-ROM 80QFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:740/38000 标准包装:250 系列:80C 核心处理器:8051 芯体尺寸:8-位 速度:16MHz 连通性:EBI/EMI，I²C，UART/USART 外围设备:POR，PWM，WDT 输入/输出数:40 程序存储器容量:- 程序存储器类型:ROMless EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-LCC（J 形引线） 包装:带卷 (TR)
M38D59GFHP#U0 功能描述:IC 740/38D5 MCU QZ-ROM 80LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:740/38000 标准包装:250 系列:80C 核心处理器:8051 芯体尺寸:8-位 速度:16MHz 连通性:EBI/EMI，I²C，UART/USART 外围设备:POR，PWM，WDT 输入/输出数:40 程序存储器容量:- 程序存储器类型:ROMless EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-LCC（J 形引线） 包装:带卷 (TR)
M38D59T-RLFS 功能描述:BOARD EMULATOR FOR 38D5 GROUP RoHS:否 类别:编程器，开发系统 >> 内电路编程器、仿真器以及调试器 系列:- 产品变化通告:Development Systems Discontinuation 19/Jul/2010 标准包装:1 系列:* 类型:* 适用于相关产品:* 所含物品:*
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*