参数资料
型号: M41T83ZM6F
厂商: STMICROELECTRONICS
元件分类: 时钟/数据恢复及定时提取
英文描述: 1 TIMER(S), REAL TIME CLOCK, PDSO8
封装: 0.150 INCH, ROHS COMPLIANT, PLASTIC, SOP-8
文件页数: 13/61页
文件大小: 983K
代理商: M41T83ZM6F
Clock operation
M41T82-M41T83
Doc ID 12578 Rev 12
3.1
Power-down time-stamp
When a power failure occurs, the time/date counters are copied into the buffer/transfer
registers and the halt update bit (HT) is automatically set to a "1". The HT bit prevents the
normal copying from counters to registers which occurs at the start of a read or write cycle.
Thus, upon power-up, the user can read the RTC registers to ascertain the time of power-
down. Additional reads will return the same time. It will appear to be frozen until the HT bit
(D6, address 0Ch) is written to 0 by the user. Then, subsequent reads will then return the
current time. For more information, see application notes AN1572 and AN3060.
Note:
Writes to the RTC registers (addresses 00h to 07h) with the HT bit set can cause time
corruption. Example: Assume a power-fail time of Monday, November 16, 2009, at
17:52:27.03. At the next power-up, that time will be frozen in the buffer/transfer registers.
On November 17, 2009, at 16:15:07.77, the user powers the system back up and tries to
write the seconds to 35 while the HT bit is still set. This will cause Monday, November 16,
2009, at 17:52:35.03 to be written into the counters because the other seven bytes of
buffer/transfer register still contain the time of power-down. The result is that the modified
time of power-down was written into the counters making it appear the part had lost time
while power was off. Thus, at power-up, the user should always clear the HT bit (write D6 to
0 in address 0Ch) before writing to any address in the range 00h to 07h.
A typical power-up flow is to read the time of power-down, then clear the HT bit, then read
the current time. If the time of power-down is not needed by the application, then the first
step can be omitted.
3.2
Clock/control register map and divider chain
The M41T8x is comprised of 32 addresses which contain registers for clock (time and date),
calibration (digital and analog), alarm 1 and 2, watchdog, flags, timer, and square wave
(M41T83 only). Clock and alarm registers store data in BCD format. Calibration, timer,
watchdog, and square wave bits are written in a binary format.
Whenever any of the eight RTC bytes (addresses 00h to 07h) are written, the internal divider
(or clock) chain will be reset upon the completion of the write cycle.
相关PDF资料
PDF描述
MPC740PRX400RE 32-BIT, 400 MHz, RISC PROCESSOR, CBGA255
MPC8555EVTALF 32-BIT, 667 MHz, RISC PROCESSOR, PBGA783
MB88152APNF-G-110-JN-ERE1 16.6 MHz, OTHER CLOCK GENERATOR, PDSO8
MPC8547PXATGB 32-BIT, 1200 MHz, MICROPROCESSOR, PBGA783
MPC8547VTAQGB 32-BIT, 1000 MHz, MICROPROCESSOR, PBGA783
相关代理商/技术参数
参数描述
M41T83ZMY6E 功能描述:实时时钟 Serial I2C bus RTC RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube
M41T83ZMY6F 功能描述:实时时钟 Serial I2C bus RTC RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube
M41T83ZQ6E 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Serial RTC with battery switchover
M41T83ZQ6F 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Serial RTC with battery switchover
M41T83ZQA6E 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:Serial I2C bus RTC with battery switchover