- 您现在的位置：买卖IC网 > PDF目录9944 > MAX11632EEG+ (Maxim Integrated Products)ADC 12BIT 300KSPS 16CH 24-QSOP PDF资料下载
参数资料
| 型号： | MAX11632EEG+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 10/22页 |
| 文件大小： | 0K |
| 描述： | ADC 12BIT 300KSPS 16CH 24-QSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 位数： | 12 |
| 采样率（每秒）： | 300k |
| 数据接口： | MICROWIRE?，QSPI?，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 762mW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-SSOP（0.154"，3.90mm 宽） |
| 供应商设备封装： | 24-QSOP |
| 包装： | 管件 |
| 输入数目和类型： | 16 个单端，单极 |
MAX11626–MAX11629/MAX11632/MAX11633
12-Bit, 300ksps ADCs
with FIFO and Internal Reference
18
______________________________________________________________________________________
CS
DOUT
SCLK
CNVST
EOC
(CONVERSION2)
MSB1
LSB1
MSB2
(ACQUISITION1)
(ACQUISITION2)
(CONVERSION1)
REQUEST MULTIPLE CONVERSIONS BY SETTING CNVST LOW FOR EACH CONVERSION.
Figure 5. Clock Mode 01 Timing
(UP TO 514 INTERNALLY CLOCKED ACQUISITIONS AND CONVERSIONS)
MSB1
LSB1
MSB2
(CONVERSION BYTE)
CS
DOUT
SCLK
DIN
EOC
THE CONVERSION BYTE BEGINS THE ACQUISITION. CNVST IS NOT REQUIRED.
Figure 6. Clock Mode 10 Timing
Internally Timed Acquisitions and
Conversions Using the Serial Interface
Performing Conversions in Clock Mode 10
In clock mode 10, the wake-up, acquisition, conversion,
and shutdown sequences are initiated by writing an
input data byte to the conversion register, and are per-
formed automatically using the internal oscillator. This
is the default clock mode upon power-up. See Figure 6
for clock mode 10 timing.
Initiate a scan by writing a byte to the conversion regis-
ter. The MAX11626–MAX11629/MAX11632/MAX11633
then power up, scan all requested channels, store the
results in the FIFO, and shut down. After the scan is
complete, EOC is pulled low and the results are avail-
able in the FIFO. EOC stays low until CS is pulled low
again.
Externally Clocked Acquisitions and
Conversions Using the Serial Interface
Performing Conversions in Clock Mode 11
In clock mode 11, acquisitions and conversions are ini-
tiated by writing to the conversion register and are per-
formed one at a time using the SCLK as the conversion
clock. Scanning and averaging are disabled, and the
conversion result is available at DOUT during the con-
version. See Figure 7 for clock mode 11 timing.
相关PDF资料 |
PDF描述 |
|---|---|
| VE-21W-CU-B1 | CONVERTER MOD DC/DC 5.5V 200W |
| MS27467T11B35S EDR | CONN PLUG 13POS STRAIGHT W/SCKT |
| IDT72291L15TF8 | IC FIFO 65536X18 LP 15NS 64QFP |
| VI-21W-CU-B1 | CONVERTER MOD DC/DC 5.5V 200W |
| ISL3156EIBZ-T | TXRX ESD 5V RS-485/422 14-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX11632EEG+ | 功能描述:模数转换器 - ADC 12-Bit 16Ch 300ksps 5.25V Precision ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX11632EEG+T | 功能描述:模数转换器 - ADC 12-Bit 16Ch 300ksps 5.25V Precision ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX11633 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:12-Bit, 300ksps ADCs with FIFO and Internal Reference |
| MAX11633EEG | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:12-Bit, 300ksps ADCs with FIFO and Internal Reference |
| MAX11633EEG+ | 功能描述:模数转换器 - ADC 12-Bit 16Ch 300ksps 3.6V Precision ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
发布紧急采购，3分钟左右您将得到回复。