- 您现在的位置：买卖IC网 > PDF目录383311 > MAX1168ACEG (MAXIM INTEGRATED PRODUCTS INC) Multichannel, 16-Bit, 200ksps Analog-to-Digital Converters PDF资料下载
参数资料
| 型号： | MAX1168ACEG |
| 厂商： | MAXIM INTEGRATED PRODUCTS INC |
| 元件分类： | ADC |
| 英文描述： | Multichannel, 16-Bit, 200ksps Analog-to-Digital Converters |
| 中文描述： | 8-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO24 |
| 封装： | 0.150 INCH, 0.025 INCH PITCH, MO-137AE, QSOP-24 |
| 文件页数： | 24/30页 |
| 文件大小： | 462K |
| 代理商： | MAX1168ACEG |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页当前第24页第25页第26页第27页第28页第29页第30页
M
Multichannel, 16-Bit, 200ksps Analog-to-Digital
Converters
24
______________________________________________________________________________________
Applications Information
Internal Reference
The internal bandgap reference provides a buffered
+4.096V. Bypass REFCAP with a 0.1μF capacitor to
AGND and REF with a 1μF capacitor to AGND. For best
results, use low-ESR, X5R/X7R ceramic capacitors.
Allow 5ms for the reference and buffer to wake up from
full power-down (see Table 5).
External Reference
The MAX1167/MAX1168 accept an external reference
with a voltage range between +3.8V and AV
DD
. Connect
the external reference directly to REF. Bypass REF to
AGND with a 10μF capacitor. When not using a low-ESR
bypass capacitor, use a 0.1μF ceramic capacitor in paral-
lel with the 10μF capacitor. Noise on the reference
degrades conversion accuracy.
The input impedance at REF is 37k
for DC currents.
During a conversion, the external reference at REF
must deliver 118μA of DC load current and have an out-
put impedance of 10
or less.
For optimal performance, buffer the reference through
an op amp and bypass the REF input. Consider the
equivalent input noise (40μV
RMS
) of the MAX1167/
MAX1168 when choosing a reference.
Internal/External Oscillator
Select either an external (0.1MHz to 4.8MHz) or the
internal 4MHz (typ) clock to perform conversions
(Table 6). The external clock shifts data in and out of
the MAX1167/MAX1168 in either clock mode.
When using the internal clock mode, the internal oscilla-
tor controls the acquisition and conversion processes,
while the external oscillator shifts data in and out of the
MAX1167/MAX1168. Turn off the external clock (SCLK)
when the internal clock is on to realize lowest noise per-
formance. The internal clock remains off in external
clock mode.
Input Buffer
Most applications require an input-buffer amplifier to
achieve 16-bit accuracy. The input amplifier must have
a slew rate of at least 2V/μs and a unity-gain bandwidth
of at least 10MHz to complete the required output-volt-
age change before the end of the acquisition time.
At the beginning of the acquisition, the internal sam-
pling capacitor array connects to AIN_ (the amplifier
input), causing some disturbance on the output of the
buffer. Ensure the sampled voltage has settled before
the end of the acquisition time.
CONTROL BIT
SETTINGS
SYNCHRONOUS SERIAL-PORT CONTROL REGISTER (SSPCON)
WCOL
SSPOV
BIT7
BIT6
X
X
Write Collision Detection Bit
Receive Overflow Detection Bit
SSPEN
BIT5
1
Synchronous Serial-Port Enable Bit:
0: Disables serial port and configures these pins as I/O port pins.
1: Enables serial port and configures SCK, SDO, and SCI pins as serial
port pins.
CKP
SSPM3
SSPM2
SSPM1
SSPM0
BIT4
BIT3
BIT2
BIT1
BIT0
0
0
0
0
1
Clock Polarity Select Bit. CKP = 0 for SPI master-mode selection.
Synchronous Serial-Port Mode Select Bit. Sets SPI master mode and
selects f
CLK
= f
OSC
/ 16.
Table 7. Detailed SSPCON Register Contents
X = Don
’
t care.
QSPI
SCLK
DOUT
CS
SCK
MISO
V
DD
SS
CS
MAX1167
MAX1168
Figure 21a. QSPI Connections
相关PDF资料 |
PDF描述 |
|---|---|
| MAX1168BCEG | Multichannel, 16-Bit, 200ksps Analog-to-Digital Converters |
| MAX1167BEEE | Multichannel, 16-Bit, 200ksps Analog-to-Digital Converters |
| MAX1167CCEE | Multichannel, 16-Bit, 200ksps Analog-to-Digital Converters |
| MAX1167CEEE | Multichannel, 16-Bit, 200ksps Analog-to-Digital Converters |
| MAX1168BEEG | Multichannel, 16-Bit, 200ksps Analog-to-Digital Converters |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1168ACEG+ | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1168ACEG+T | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1168ACEG-T | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1168AEEG | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1168AEEG+ | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
发布紧急采购，3分钟左右您将得到回复。