- 您现在的位置：买卖IC网 > PDF目录9867 > MAX1294ACEI+ (Maxim Integrated Products)IC ADC 12BIT 420KSPS 28-QSOP PDF资料下载
参数资料
| 型号： | MAX1294ACEI+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 5/19页 |
| 文件大小： | 0K |
| 描述： | IC ADC 12BIT 420KSPS 28-QSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 位数： | 12 |
| 采样率（每秒）： | 420k |
| 数据接口： | 并联 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 667mW |
| 电压电源： | 单电源 |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-SSOP（0.154"，3.90mm 宽） |
| 供应商设备封装： | 28-QSOP |
| 包装： | 管件 |
| 输入数目和类型： | 6 个单端，单极；6 个单端，双极；3 个伪差分，单极；3 个伪差分，双极 |
MAX1294/MAX1296
420ksps, +5V, 6-/2-Channel, 12-Bit ADCs
with +2.5V Reference and Parallel Interface
______________________________________________________________________________________
13
External Clock Mode
To select external clock mode, bits D6 and D7 of the
control byte must be set to 1. Figure 6 shows the clock
and WR timing relationship for internal (Figure 6a) and
external (Figure 6b) acquisition modes with an external
clock. For proper operation, a 100kHz to 7.6MHz clock
frequency with 30% to 70% duty cycle is recommended.
Operating the MAX1294/MAX1296 with clock frequen-
cies lower than 100kHz is not recommended because
the resulting voltage droop across the hold capacitor in
the T/H stage degrades performance.
Digital Interface
The input and output data are multiplexed on a three-
state parallel interface (I/O) that can easily be inter-
faced with standard Ps. The signals CS, WR, and RD
control the write and read operations. CS represents
the chip-select signal, which enables a P to address
the MAX1294/MAX1296 as an I/O port. When high, CS
disables the CLK, WR, and RD inputs and forces the
interface into a high-impedance (high-Z) state.
Figure 6a. External Clock and WR Timing (Internal Acquisition Mode)
Figure 6b. External Clock and WR Timing (External Acquisition Mode)
WR
CLK
WR
WR GOES HIGH WHEN CLK IS HIGH
WR GOES HIGH WHEN CLK IS LOW
tCWS
tCH
tCL
tCP
tCWH
ACQUISITION STARTS
CONVERSION STARTS
ACQUISITION ENDS
ACQMOD = "0"
WR
CLK
WR
WR GOES HIGH WHEN CLK IS HIGH
WR GOES HIGH WHEN CLK IS LOW
tDH
tCWH
tCWS
ACQUISITION STARTS
CONVERSION STARTS
ACQUISITION ENDS
ACQMOD = "1"
ACQMOD = "0"
相关PDF资料 |
PDF描述 |
|---|---|
| MS27468E15B35PB | CONN RCPT 37POS JAM NUT W/PINS |
| MAX1265ACEI+ | IC ADC 12BIT 265KSPS 28-QSOP |
| VE-2TP-MX-F4 | CONVERTER MOD DC/DC 13.8V 75W |
| VE-2TP-MX-F3 | CONVERTER MOD DC/DC 13.8V 75W |
| VE-2TP-MX-F2 | CONVERTER MOD DC/DC 13.8V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1294ACEI+ | 功能描述:模数转换器 - ADC 12-Bit 6Ch 420ksps 5.5V Precision ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1294ACEI+T | 功能描述:模数转换器 - ADC 12-Bit 6Ch 420ksps 5.5V Precision ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1294ACEI-T | 功能描述:模数转换器 - ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1294AEEI | 功能描述:模数转换器 - ADC Integrated Circuits (ICs) RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MAX1294AEEI+ | 功能描述:模数转换器 - ADC 12-Bit 6Ch 420ksps 5.5V Precision ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
发布紧急采购，3分钟左右您将得到回复。