- 您现在的位置：买卖IC网 > PDF目录9464 > MAX1346BETX+ (Maxim Integrated Products)IC ADC/DAC 12BIT W/FIFO 36WQFN PDF资料下载
参数资料
| 型号： | MAX1346BETX+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 6/39页 |
| 文件大小： | 0K |
| 描述： | IC ADC/DAC 12BIT W/FIFO 36WQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 类型： | ADC，DAC |
| 分辨率（位）： | 12 b |
| 采样率（每秒）： | 225k |
| 数据接口： | MICROWIRE?，QSPI?，串行，SPI? |
| 电压电源： | 模拟和数字 |
| 电源电压： | 4.75 V ~ 5.25 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 36-WFQFN 裸露焊盘 |
| 供应商设备封装： | 36-TQFN 裸露焊盘（6x6） |
| 包装： | 管件 |
第1页第2页第3页第4页第5页当前第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页
MAX1340/MAX1342/MAX1346/MAX1348
12-Bit, Multichannel ADCs/DACs with FIFO,
Temperature Sensing, and GPIO Ports
14
______________________________________________________________________________________
Detailed Description
The MAX1340/MAX1342/MAX1346/MAX1348 integrate
a multichannel 12-bit ADC, and a quad 12-bit DAC in a
single IC. The devices also include a temperature sen-
sor and configurable GPIOs with a 25MHz SPI-/QSPI-
/MICROWIRE-compatible serial interface. The ADC is
available in a 4 or an 8 input-channel version. The four
DAC outputs settle within 2.0s, and the ADC has a
225ksps conversion rate.
All devices include an internal reference (4.096V) pro-
viding a well-regulated, low-noise reference for both the
ADC and DAC. Programmable reference modes for the
ADC and DAC allow the use of an internal reference, an
external reference, or a combination of both. Features
such as an internal ±1°C accurate temperature sensor,
FIFO, scan modes, programmable internal or external
clock modes, data averaging, and AutoShutdown allow
users to minimize both power consumption and proces-
sor requirements. The low glitch energy (4nVs) and
low digital feedthrough (0.5nVs) of the integrated quad
DACs make these devices ideal for digital control of
fast-response closed-loop systems.
The devices are guaranteed to operate with a supply
voltage from +4.75V to +5.25V. The devices consume
2.5mA at 225ksps throughput, only 22A at 1ksps
throughput, and under 0.2A in the shutdown mode.
The MAX1342/MAX1348 offer four GPIOs that can be
configured as inputs or outputs.
Figure 1 shows the MAX1342 functional diagram. The
MAX1342/MAX1348 only include the GPIO A0, A1, GPIO
C0, C1 blocks. The MAX1340/MAX1346 exclude the
GPIOs. The output-conditioning circuitry takes the internal
parallel data bus and converts it to a serial data format at
DOUT, with the appropriate wake-up timing. The arith-
metic logic unit (ALU) performs the averaging function.
SPI-Compatible Serial Interface
The MAX1340/MAX1342/MAX1346/MAX1348 feature a
serial interface that is compatible with SPI and
MICROWIRE devices. For SPI, ensure the SPI bus mas-
ter (typically a microcontroller (C)) runs in master
mode so that it generates the serial clock signal. Select
the SCLK frequency of 25MHz or less, and set the
clock polarity (CPOL) and phase (CPHA) in the C con-
trol registers to the same value. The MAX1340/
MAX1342/MAX1346/MAX1348 operate with SCLK idling
high or low, and thus operate with CPOL = CPHA = 0 or
CPOL = CPHA = 1. Set
CS low to latch any input data
at DIN on the falling edge of SCLK. Output data at
DOUT is updated on the falling edge of SCLK in clock
modes 00, 01, and 10. Output data at DOUT is updated
on the rising edge of SCLK in clock mode 11. See
Figures 6–11. Bipolar true-differential results and tem-
perature-sensor results are available in two’s comple-
ment format, while all other results are in binary.
A high-to-low transition on
CS initiates the data-input
operation. Serial communications to the ADC always
begin with an 8-bit command byte (MSB first) loaded
from DIN. The command byte and the subsequent data
bytes are clocked from DIN into the serial interface on
the falling edge of SCLK. The serial-interface and fast-
interface circuitry is common to the ADC, DAC, and
GPIO sections. The content of the command byte
determines whether the SPI port should expect 8, 16, or
24 bits and whether the data is intended for the ADC,
DAC, or GPIOs (if applicable). See Table 1. Driving
CS
high resets the serial interface.
The conversion register controls ADC channel selec-
tion, ADC scan mode, and temperature-measurement
requests. See Table 4 for information on writing to the
conversion register. The setup register controls the
clock mode, reference, and unipolar/bipolar ADC con-
figuration. Use a second byte, following the first, to
write to the unipolar-mode or bipolar-mode registers.
See Table 5 for details of the setup register and see
Tables 6, 7, and 8 for setting the unipolar- and bipolar-
mode registers. Hold
CS low between the command
byte and the second and third byte. The ADC averag-
ing register is specific to the ADC. See Table 9 to
address that register. Table 11 shows the details of the
reset register.
Begin a write to the DAC by writing 0001XXXX as a
command byte. The last 4 bits of this command byte
are don’t-care bits. Write another 2 bytes (holding
CS
low) to the DAC interface register following the com-
mand byte to select the appropriate DAC and the data
to be written to it. See the
DAC Serial Interface section
and Tables 10, 17, and 18.
Write to the GPIOs (if applicable) by issuing a command
byte to the appropriate register. Writing to the
MAX1342/MAX1348 GPIOs requires 1 additional byte fol-
lowing the command byte. See Tables 12–16 for details
on GPIO configuration, writes, and reads. See the
GPIO
Command section. Command bytes written to the
GPIOs on devices without GPIOs are ignored.
相关PDF资料 |
PDF描述 |
|---|---|
| LTC6992HDCB-2#TRPBF | IC OSC SILICON 1MHZ 6-DFN |
| V72A8M300BL2 | CONVERTER MOD DC/DC 8V 300W |
| LTC6992HDCB-1#TRPBF | IC OSC SILICON 1MHZ 6-DFN |
| MS3100C28-11P | CONN RCPT 22POS WALL MNT W/PINS |
| MAX198BCAI+T | IC DAS 12BIT 6CH 28-SSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1346BETX+ | 功能描述:ADC / DAC多通道 12-Bit 4Ch 300ksps 5.25 Precision ADC RoHS:否 制造商:Texas Instruments 转换速率: 分辨率:8 bit 接口类型:SPI 电压参考: 电源电压-最大:3.6 V 电源电压-最小:2 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-40 |
| MAX1346BETX+T | 功能描述:ADC / DAC多通道 12-Bit 4Ch 300ksps 5.25 Precision ADC RoHS:否 制造商:Texas Instruments 转换速率: 分辨率:8 bit 接口类型:SPI 电压参考: 电源电压-最大:3.6 V 电源电压-最小:2 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-40 |
| MAX1346BETX-T | 功能描述:ADC / DAC多通道 RoHS:否 制造商:Texas Instruments 转换速率: 分辨率:8 bit 接口类型:SPI 电压参考: 电源电压-最大:3.6 V 电源电压-最小:2 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-40 |
| MAX1347BETX | 制造商:Maxim Integrated Products 功能描述:12-BIT, MULTICHANNEL ADCS/DACS WITH FIFO, TEM - Rail/Tube |
| MAX1347BETX+ | 制造商:Maxim Integrated Products 功能描述:12-BIT MULTICHANNEL ADCS/DACS WITH - Rail/Tube |
发布紧急采购，3分钟左右您将得到回复。