- 您现在的位置：买卖IC网 > PDF目录10640 > MAX14780EESA+ (Maxim Integrated Products)IC TXRX RS485/422 ESD 8SO PDF资料下载
参数资料
| 型号： | MAX14780EESA+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 4/14页 |
| 文件大小： | 0K |
| 描述： | IC TXRX RS485/422 ESD 8SO |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 系列： | * |
12
Maxim Integrated
+5.0V, ±30kV ESD-Protected, Fail-Safe,
Hot-Swap, RS-485/RS-422 Transceiver
MAX14780E
Applications Information
The standard RS-485 receiver input impedance is 12kΩ
(1-unit load), and the standard driver can drive up
to 32-unit loads. The MAX14780E has a 1/8-unit load
receiver input impedance (96kΩ), allowing up to 256
transceivers to be connected in parallel on one commu-
nication line. Any combination of the MAX14780E, as well
as other RS-485 transceivers with a total of 32-unit loads
or fewer, can be connected to the line.
Reduced EMI and Reflections
The MAX14780E features reduced slew-rate drivers that
minimize EMI and reduce reflections caused by improp-
erly terminated cables, allowing error-free data transmis-
sion up to 500kbps.
Low-Power Shutdown Mode
Low-power shutdown mode is initiated by bringing both
RE high and DE low. In shutdown, the devices typically
draw only 2.8μA of supply current.
RE and DE can be driven simultaneously; the devices
are guaranteed not to enter shutdown if RE is high and
DE is low for less than 50ns. If the inputs are in this state
for at least 700ns, the devices are guaranteed to enter
shutdown.
Enable times tZH and tZL (see the Switching
Characteristics section) assume the devices were not in
a low-power shutdown state. Enable times tZH(SHDN) and
tZL(SHDN) assume the devices were in shutdown state.
It takes drivers and receivers longer to become enabled
from low-power shutdown mode (tZH(SHDN), tZL(SHDN))
than from driver/receiver-disable mode (tZH, tZL).
Driver Output Protection
Two mechanisms prevent excessive output current and
power dissipation caused by faults or by bus conten-
tion. The first, a foldback current limit on the output
stage, provides immediate protection against short cir-
cuits over the whole common-mode voltage range (see
the Typical Operating Characteristics). The second, a
thermal-shutdown circuit, forces the driver outputs into
a high-impedance state if the die temperature exceeds
+175°C (typ).
Line Length
The RS-485/RS-422 standard covers line lengths up to
4000ft. For line lengths greater than 4000ft, it may be
necessary to implement a line repeater.
Figure 10c. IEC 61000-4-2 ESD Test Model
Figure 10d. IEC 61000-4-2 ESD Generator Current Waveform
CHARGE-CURRENT-
LIMIT RESISTOR
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
Cs
150pF
RC
50M
TO 100M
RD
330
HIGH-
VOLTAGE
DC
SOURCE
DEVICE
UNDER
TEST
tr = 0.7ns TO 1ns
30ns
60ns
t
100%
90%
10%
I PEAK
I
相关PDF资料 |
PDF描述 |
|---|---|
| HR10-10J-12S | JACK W/SOCKET INSERT (12 CON) |
| RM-15TRD-10S | RECEPTACLE W/SOCKET INSERT-10CON |
| MAX3469CSA+ | IC TXRX RS485/422 8-SOIC |
| MAX490ECSA+ | IC TXRX RS485/RS422 8-SOIC |
| RM-15TJD-10P | JACK EXT. W/PIN INSERT (10 CON) |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX14780EESA+ | 功能描述:RS-422/RS-485 接口 IC PROFIBUS RS-485 Transceiver RoHS:否 制造商:Maxim Integrated 数据速率:1136 Kbps 工作电源电压:3 V to 5.5 V 电源电流:5.9 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-28 封装:Tube |
| MAX14780EESA+T | 功能描述:RS-422/RS-485 接口 IC PROFIBUS RS-485 Transceiver RoHS:否 制造商:Maxim Integrated 数据速率:1136 Kbps 工作电源电压:3 V to 5.5 V 电源电流:5.9 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-28 封装:Tube |
| MAX14783EASA+ | 制造商:Maxim Integrated Products 功能描述:HALF DUPLEX, DUAL VOLTAGE (3V TO 5.5V), HIGH ESD HBM (+/-35K - Rail/Tube 制造商:Maxim Integrated Products 功能描述:IC TXRX RS485/422 ESD 8SO |
| MAX14783EASA+T | 制造商:Maxim Integrated Products 功能描述:HALF DUPLEX, DUAL VOLTAGE (3V TO 5.5V), HIGH ESD HBM (+/-35K - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC TXRX RS485/422 ESD 8SO |
| MAX14783EATA+ | 制造商:Maxim Integrated Products 功能描述:- Rail/Tube |
发布紧急采购，3分钟左右您将得到回复。